gnokii-users
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: getting started with usb and n52


From: Jon Berg
Subject: Re: getting started with usb and n52
Date: Thu, 19 Aug 2010 00:28:25 +0200

For your information the phone model is the Nokia E52, not N52.

Regards,
Jon Berg.

On Thu, Aug 19, 2010 at 12:22 AM, Jon Berg <address@hidden> wrote:
> Thanks for your help.
>
> The problem was solved by using "PC suite".
> Then I get AT mode and /dev/ttyACM0 to work with n52. Very exciting!
>
> I did not get series40 mode to work:
> gnokii --identify
> GNOKII Version 0.6.29
> Couldn't read /home/jberg/.config/gnokii/config config file.
> Couldn't read /etc/xdg/gnokii/config config file.
> Couldn't read /root/.gnokiirc config file.
> LOG: debug mask is 0x1
> Config read from file /etc/gnokiirc.
> phone instance config:
> model = series40
> port = 1
> connection = dku2libusb
> initlength = default
> serial_baudrate = 19200
> serial_write_usleep = -1
> handshake = software
> require_dcd = 0
> smsc_timeout = 10
> rfcomm_channel = 0
> sm_retry = 0
> Connecting
> Serial device: opening device USB
> Ignoring extra header, type 171, length 3
> Ignoring extra header, type 253, length 4
> Found FBUS interface
> Can't set configuration: -16
> Getting model...
> Message sent: 0x1b / 0x0006
> 00 01 00 07 01 00                               |
> Message sent: 0x1b / 0x0006
> 00 01 00 07 01 00                               |
> Message sent: 0x1b / 0x0006
> 00 01 00 07 01 00                               |
> Serial device: closing device
> Telephone interface init failed: Command timed out.
> Quitting.
> Command timed out.
>
> Regards,
> Jon Berg.
>
> On Wed, Aug 18, 2010 at 11:52 PM, Pawel Kot <address@hidden> wrote:
>> Hi,
>>
>> On Wed, Aug 18, 2010 at 23:33, Jon Berg <address@hidden> wrote:
>>> I tried to get gnokii to work, I have n52 connected with usb to a
>>
>> n52 is series40 6th Edition so it may malfunction.
>>
>>> linux. I have installed gnokii by using the archlinux package.
>>> The it is connected with CA-126 usb cable.
>>
>> [...]
>>
>>> I tried a basic config:
>>>
>>> gnokii --identify
>>> GNOKII Version 0.6.29
>>> Couldn't read /home/jberg/.config/gnokii/config config file.
>>> Couldn't read /etc/xdg/gnokii/config config file.
>>> Couldn't read /home/jberg/.gnokiirc config file.
>>> LOG: debug mask is 0x1
>>> Config read from file /etc/gnokiirc.
>>> phone instance config:
>>> model = AT
>>> port = 1
>>> connection = dku2libusb
>>
>> Please have a look at wiki. AT and dku2libusb are incompatible. For
>> dku2libusb you need series40.
>>
>>> Then I read: http://wiki.gnokii.org/index.php/Cables
>>> And tried the two configurations under DKE-2:
>>> [global]
>>> model = series40
>>> port = 1
>>> connection = dku2libusb
>>
>> That should actually work.
>>
>>> Serial device: opening device USB
>>> Couldn't open PHONET device: Inappropriate ioctl for device
>>
>> Looks like some low lever error. Not sure now why it could occur.
>>
>>> Then the other, did: /bin/mknod /dev/ttyACM0 c 166 0, also tried with
>>> modprobe usbserial vendor=0x421 product=0x1cd
>>> is there maybe something else that needs to be done to configure
>>> /dev/ttyACM0 here?
>>
>> This is not relevant to series40/dku2libusb. Still mknod is ancient
>> way. Please see wiki for hints how to proceed.
>>
>>> model = AT
>>> port = /dev/ttyACM0
>>> connection = serial
>>
>> That could work also.
>>
>>> Serial device: opening device /dev/ttyACM0
>>> Gnokii serial_open: open: No such device
>>
>> It means no real device is in place.
>>
>>> I suppose the problem is something with the connection to the phone.
>>> The phone has a menu for usb connection mode: "Connect PC to Net", "PC
>>> suite", "Mass storage", "Picture transfere".
>>> I selected "Connect PC to Net".
>>
>> PC suite is the right one for series40/dku2libusb
>>
>> take care,
>> --
>> Pawel Kot
>>
>> _______________________________________________
>> gnokii-users mailing list
>> address@hidden
>> http://lists.nongnu.org/mailman/listinfo/gnokii-users
>>
>



reply via email to

[Prev in Thread] Current Thread [Next in Thread]