gnokii-users
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Gnokii error message


From: monet nisperos
Subject: Gnokii error message
Date: Thu, 5 Aug 2010 00:33:38 +0900

Hi, I am trying to connect my Nokia 6680 using a USB data cable.  Port = /dev/ttyUSB0; connection = serial; model = AT.  Then I executed gnokii --identify and this is the result .

Connecting
Serial device: opening device /dev/ttyUSB0
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to low
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                
SM_Block: exiting the retry loop
Serial device: closing device
Serial device: opening device /dev/ttyUSB0
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to high
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                
SM_Block: exiting the retry loop
Serial device: closing device
Serial device: opening device /dev/ttyUSB0
Serial device: setting RTS to low and DTR to low
Serial device: setting RTS to high and DTR to high
Serial device: setting speed to 19200
Switching to FBUS mode
Serial device: setting speed to 115200
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                
SM_Block: exiting the retry loop
Serial device: closing device
Telephone interface init failed: Command timed out.
Quitting.
Command timed out.

Can someone please help me analyse this message? Thanks in advance!
--
NISPEROS, SIMONETTE  A.



reply via email to

[Prev in Thread] Current Thread [Next in Thread]