[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Gnokii Bluetooth Pairing

From: Leon Hauck
Subject: Re: Gnokii Bluetooth Pairing
Date: Wed, 16 Jun 2010 09:01:46 -0700
User-agent: Mozilla-Thunderbird (X11/20100328)

I'm not familiar enough with Ubuntu so I don't know what package it's in, but I think the program you are looking for is 'bluetooth-applet'.

You run this during the pairing process and it will pop up a window for you to enter the pin on the ubuntu machine.

Hope this helps

-- Leon

address@hidden wrote:
Hey guys!

Please excuse some maybe bad English, but I'm no native.
First of all, we are running at an Ubuntu Server 10.04 x32.

We have problems with the Bluetooth connection with a Nokia 6230.
We read a lot about an hcid.conf file at /etc/bluetooth, but we only have the following in there:
-rw-r--r--   1 root root 1142 2010-04-09 12:34 audio.conf
-rw-r--r--   1 root root  262 2010-04-09 12:34 input.conf
-rw-r--r--   1 root root 1917 2010-06-16 13:44 main.conf
-rw-r--r--   1 root root  751 2010-06-15 21:15 network.conf
-rw-r--r--   1 root root  297 2010-06-15 21:16 rfcomm.conf
-rw-r--r--   1 root root  248 2010-04-09 12:34 serial.conf

Every time we try to pair our Ubuntu Server with the cell phone, the phone 
expected a pin. But we can't find any config file where this pin is defined or 
where we can edit/set it.

sudo gnokii –identify posts the following contend after entering a pin:
GNOKII Version 0.6.28
LOG: debug mask is 0x1
Config read from file /home/dipl/.gnokiirc.
phone instance config:
model = 6230
port = 00:12:62:24:B5:CF
connection = bluetooth
initlength = default
serial_baudrate = 19200
serial_write_usleep = -1
handshake = software
require_dcd = 0
smsc_timeout = 10
rfcomm_channel = 0
sm_retry = 0
Forcing rfcomm_channel = 14 for FBUS connection
Serial device: opening device 00:12:62:24:B5:CF
Channel: 14
Channel: 14
Using channel: 14
Can't connect: Connection refused
Couldn't open PHONET device: Connection refused
Error in link initialisation: 1
Telephone interface init failed: Command failed.
Command failed.

I hope you can help us!

Thanks in advice, kritl

reply via email to

[Prev in Thread] Current Thread [Next in Thread]