Re: Nokia 6230i + CA-53 problem + smsd

[Matthew]

   Hi,
> BTW. Why don't you use FBUS driver?
>   

Because it is only combination of parameters that I have found working... :(

Here are debug logs from different configurations I have tried:

GNOKII Version 0.6.23cvs
LOG: debug mask is 0x1
LOG: rlpdebug mask is 0x1
LOG: xdebug mask is 0x1
Config read from file /home/smsd/.gnokiirc.
phone instance config:
model = 6510
port = /dev/ttyACM1
connection = serial
initlength = default
serial_baudrate = 19200
serial_write_usleep = -1
handshake = software
require_dcd = 0
smsc_timeout = 20
rfcomm_channel = 1
sm_retry = 0
Connecting
Serial device: opening device /dev/ttyACM1
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to low

===================================
I don't see any ttyUSB[0-9] in my /dev. But nevertheless I have tried:
===================================

GNOKII Version 0.6.23cvs
LOG: debug mask is 0x1
LOG: rlpdebug mask is 0x1
LOG: xdebug mask is 0x1
Config read from file /home/smsd/.gnokiirc.
Lockfile /var/lock/LCK..ttyACM1 is stale. Overriding it..
phone instance config:
model = 6510
port = /dev/ttyACM1
connection = dku2libusb
initlength = default
serial_baudrate = 19200
serial_write_usleep = -1
handshake = software
require_dcd = 0
smsc_timeout = 20
rfcomm_channel = 1
sm_retry = 0
Connecting
Serial device: opening device USB
Ignoring extra header, type 171, length 5
Found FBUS interface
Can't set configuration: -1
Can't claim control interface: -1
Couldn't open PHONET device: Operation not permitted
Error in link initialisation: 1
Telephone interface init failed: Command failed.
Quitting.
Command failed.

===================================

GNOKII Version 0.6.23cvs
LOG: debug mask is 0x1
LOG: rlpdebug mask is 0x1
LOG: xdebug mask is 0x1
Config read from file /home/smsd/.gnokiirc.
phone instance config:
model = 6510
port = /dev/ttyACM1
connection = dlr3p
initlength = default
serial_baudrate = 19200
serial_write_usleep = -1
handshake = software
require_dcd = 0
smsc_timeout = 20
rfcomm_channel = 1
sm_retry = 0
Connecting
Serial device: opening device /dev/ttyACM1
Serial device: setting RTS to low and DTR to low
Serial device: setting RTS to high and DTR to high
Serial device: setting speed to 19200
Switching to FBUS mode
Serial device: setting speed to 115200
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                
[Echo cancelled]
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                
[Echo cancelled]
SM_Block: exiting the retry loop
Serial device: closing device
Serial device: opening device /dev/ttyACM1
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to low