[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: USB Baud Rate Settings

From: Pawel Kot
Subject: Re: USB Baud Rate Settings
Date: Wed, 21 Nov 2007 18:53:55 +0100


On Nov 21, 2007 6:44 PM, White, Phil <address@hidden> wrote:
>  I'm having a few connection problems, and was wondering if anyone has come
> across a solution...
>  I have an OEM Nokia GSM modem here (Teltonika), which, using Minicom, I can
> communicate with - no problem.
>  /dev/ttyUSB0 (it uses a USB-to-Serial chip)
>  However, to do so, I have to have the speed set to 230400 8N1.
>  However, trying Gnokii (0.6.19), I get the error message
>  Serial Port Speed 230400 not supported.

Edit common/devices/unixserial.c and modify serial_changespeed().

Pawel Kot

reply via email to

[Prev in Thread] Current Thread [Next in Thread]