Re: Initialization failed (11) for T230 + DCU-11

[munsoar]

Thanks for the answer.

Can it be a faulty cable?

As far as I know the cable shall act like a charger for the battery when
it's plugged in to the USB-port.
But I haven't got that indication on the display when I have tried.


Pawel Kot wrote:
> 
> Hi,
> 
> On 5/22/07, munsoar <address@hidden> wrote:
>>
>> According to
>> http://blog.mc-thias.org/index.php?blog=5&p=41&more=1&c=1&tb=1&pb=1#more41
>> this page  gnokii shall work fine with T230 and DCU-11.
>>
>> But I have some problem when I try to verify that everything is correct
>> by
>> using gnokii --identify and get the following output:
>>
>> GNOKII Version 0.6.14
>> LOG: debug mask is 0x1
>> phone instance config:
>> model: AT
>> port_device: /dev/ttyUSB0
>> connection_type: 0
>> init_length: 0
>> serial_baudrate: 9600
>> serial_write_usleep: -1
>> hardware_handshake: 0
>> require_dcd: 0
>> smsc_timeout: 100
>> connect_script:
>> disconnect_script:
>> rfcomm_cn: 1
>> sm_retry: off
>> Initializing AT capable mobile phone ...
>> Serial device: opening device /dev/ttyUSB0
>> Serial device: setting RTS to high and DTR to high
>> Message sent: 0x00 / 0x0004
>> 41 54 5a 0d                                     | ATZ
>> write: [ATZ<cr>]
>> Message sent: 0x00 / 0x0005
> 
> There is completly no answer from the phone. You may be using
> incorrect port or whatever.
> 
> take care,
> pkot
> -- 
> Pawel Kot
> 
> 
> _______________________________________________
> gnokii-users mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/gnokii-users
> 
> 

-- 
View this message in context: 
http://www.nabble.com/Initialization-failed-%2811%29-for-T230-%2B-DCU-11-tf3800077.html#a10771802
Sent from the gnokii-users mailing list archive at Nabble.com.