Re: Nokia 6020 over IrDA on WinXP - Couldn't open PHONET device: No error

[Mike]

Jari Turkia schrieb:
> Mike wrote:
>> I thought, Gnokii makes use of the driver in the Nokia PC-Suite, see
>> below?
>>
>>   
> Correct. There is no Gnokii IrDA-driver. We still need to support IrDA
> in the application as the phone expects the traffic to be IrDA.
> 
>> Having done so I get:
>> ...
>> Serial device: opening device com1:
>> WSAStartup() failed.
>> Failed to initialize socket subsystem: need WINSOCK2. Please upgrade.
>> ...
>> Winsock2 should be OK on WinXP?
>>   
> 
> Winsock2 is ok. Are you sure you have the correct Com-port? If your PC
> has one physical port, it is highly likely the Com1. So any software
> ports are probably on a higher numbers. The one in my PC is Com5.
> 
>>> You may want to find out the exact COM-port by some means. See your
>>>
>>>     
>> Have done already. It says:
>>   
> 
> Ok. What did you determine the Com-port to be?

1. I tried all from com1 to com9.

2. I did the Hyperterminal-trial. On my Notebook using COM3: it says
"OK" as answer to "AT". Other COMs do not respond. The complete list of
possible connections with Hyperterminal is:
- Creatix FaxModem,
- Nokia 6020 IrDa
- COM3
- COM1
- COM5
- TCP/IP(Winsock)
(By the way, using Nokia6020 IrDa I can ring up any phone number from
hyperterminal.)

On my desktop I can use COM16 instead.

The messages allways remain the same.

Kind regards,
Mike