Re: Nokia 6030 problems

[Konrad Wojas]

On Sat, Mar 24, 2007 at 06:48:19PM +0000, hacknslash wrote:
> Hi Konrad
> 
> To check is the cable is talking to the phone you can look at lsusb if
> its installed, and also the output of dmesg.
> 
> Please let me know the output of both, as there is an alternative libusb
> which is compatible with the 6000 series phones. Which we may be able to
> utilise.

When connecting the cable (without having the phone connected) the
following appears in the lsusb output:
Bus 005 Device 099: ID 6547:0232
(no device description is shown)

Relevant dmesg output:
[1238161.607162] usb 5-5.1: new full speed USB device using ehci_hcd and 
address 100
[1238161.653806] usb 5-5.1: configuration #1 chosen from 1 choice
[1238161.653979] ark3116 5-5.1:1.0: ark3116 converter detected
[1238161.655938] usb 5-5.1: ark3116 converter now attached to ttyUSB0

Connecting the phone doesn't result in any new messages.

Reconnecting everything actually fixed the problem I thing, though I
don't understand why it didn't work the first time...

--getphonebook works as expected now!

However, there are still some issues with --monitor and using xgnokii.
Attached is some new output.

Current config (using the misc.c patch):
[global]
port = /dev/ttyUSB0
model = 6030
initlength = default
connection = dku5
serial_baudrate = 19200
[logging]
debug = on

Best regards,
Konrad

gnokii4.txt
Description: Text document

gnokii5.txt
Description: Text document