gnokii --identify help

[mikha]

Hello, 

I've installed gnokii 0.6.14 from source now, I'm using bluetooth
connection. I edited the .gnokiirc, tried 'gnokii --identify' and this is
what happened

GNOKII Version 0.6.14
LOG: debug mask is 0x1
Lockfile /var/lock/LCK..ttyS0 is stale. Overriding it..
phone instance config:
model: 6510
port_device: /dev/ttyS0
connection_type: 0
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script:
disconnect_script:
rfcomm_cn: 1
sm_retry: off
Connecting
Serial device: opening device /dev/ttyS0
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to low
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block: exiting the retry loop
Serial device: opening device /dev/ttyS0
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to high
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block: exiting the retry loop
Serial device: opening device /dev/ttyS0
Serial device: setting RTS to low and DTR to low
Serial device: setting RTS to high and DTR to high
Serial device: setting speed to 19200
Switching to FBUS mode
Serial device: setting speed to 115200
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block: exiting the retry loop
Identifying...
Message sent: 0x1b / 0x0005
00 01 00 00 41                                  |     A
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block: exiting the retry loop
IMEI         : Unknown
Manufacturer : Nokia
Model        : Unknown
Product name : Unknown
Revision     : Unknown
Serial device: closing device


IMEI, Model, prod name and revision are unknown.. is this ok? what did I do
wrong?
also, when i try  'echo "This is a test message" | gnokii --sendsms
+639179291791 -r', sending fails

please help. thanks
-- 
View this message in context: 
http://www.nabble.com/gnokii---identify-help-tf3290922.html#a9153521
Sent from the gnokii-users mailing list archive at Nabble.com.