[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

dku2libusb problems

From: andrew teo
Subject: dku2libusb problems
Date: Fri, 17 Nov 2006 19:55:10 -0800 (PST)

Hi everyone!
I have connected my Nokia 6100 via CA42.
I have gotten usbserial working so my phone is recognised as ttyUSB0.
I have used model = 6100 and connection = dku2libusb. Gnokii was compiled
with libusb support (besides this, are there any more steps to get
dku2libusb working?)
However, when I issue gnokii --identify, the message (right below) occurs. 
Any ideas? Thanks!

address@hidden ~]# gnokii --identify
GNOKII Version 0.6.14
LOG: debug mask is 0x1
phone instance config:
model: 6100
port_device: /dev/ttyUSB0
connection_type: 10
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
rfcomm_cn: 14
sm_retry: off
Serial device: opening device /dev/ttyUSB0
Couldn't open PHONET device: Inappropriate ioctl for device
Error in link initialisation: 1
Telephone interface init failed: Command failed.
Command failed.
Serial device: closing device

View this message in context:
Sent from the gnokii-users mailing list archive at

reply via email to

[Prev in Thread] Current Thread [Next in Thread]