[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: PHONET and bluetooth!

From: andrew teo
Subject: Re: PHONET and bluetooth!
Date: Mon, 13 Nov 2006 11:05:52 -0800 (PST)

Timothy Murphy wrote:
> On Monday 13 November 2006 11:47, Andrew wrote:
>> However, when I use bluetooth directly,
>> port = XX:XX:XX:XX:XX:XX
>> model = series60
>> connection = bluetooth
>> and when i enter
>> "gnokii --identify"
>> i get the following error:
>> serial device: opening device XX:XX:XX:XX:XX:XX
>> couldn't open PHONET device: No such file or directory
>> Error in link initialisation: 1
>> Telephone interface init failed: Command failed.
>> Quitting
>> Serial device: closing device
> ...
>> I've been struggling with this and would really appreciate your help! :)
> I'm no expert, though I am using bluetooth on my FC-6 laptop
> to communicate with my Sony-Ericsson T630.
> 1) Is bluetooth running on your computer,
> as shown by the result of "hciconfig -a"?

Hi! thanks for responding! 

yes, bluetooth is running on my computer. it is shown as up and running. the
following is the output: 

hci0:   Type: USB
        BD Address: 00:10:60:D1:0C:63 ACL MTU: 384:8 SCO MTU: 64:8
        RX bytes:385 acl:0 sco:0 events:18 errors:0
        TX bytes:319 acl:0 sco:0 commands:17 errors:0
        Features: 0xff 0xff 0x8f 0xfe 0x9b 0xf9 0x00 0x80
        Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
        Link policy: RSWITCH HOLD SNIFF PARK
        Link mode: SLAVE ACCEPT
        Name: 'localhost.localdomain-0'
        Class: 0x120104
        Service Classes: Networking
        Device Class: Computer, Desktop workstation
        HCI Ver: 2.0 (0x3) HCI Rev: 0x7a6 LMP Ver: 2.0 (0x3) LMP Subver:
        Manufacturer: Cambridge Silicon Radio (10)
> 2) Is bluetooth turned on on your phone?

Bluetooth is turned on on my phone. The Bluetooth icon is shown on my phone.
I have run the gnapplet as well on my phone. 

> 3) If both are true, did you not get a PIN enquiry
> on phone or computer?

I got a PIN enquiry. I put it in and saved it and it does not ask me

I can see a connection on my phone when I connect using AT mode using rfcomm
and bluetooth. 

However, there is no response at all when I use non-AT mode.

Right now, I suspect the signal was not sent out at all when I use non-AT
> -- 
> Timothy Murphy  
> e-mail (<80k only): tim /at/
> tel: +353-86-2336090, +353-1-2842366
> s-mail: School of Mathematics, Trinity College, Dublin 2, Ireland
> _______________________________________________
> gnokii-users mailing list
> address@hidden
Quoted from:

View this message in context:
Sent from the gnokii-users mailing list archive at

reply via email to

[Prev in Thread] Current Thread [Next in Thread]