"gnokii --identify" failed

[waterser forrest]

I'm using a Nokia 3100, which is connected to my PC(Ubuntu6.06) with a DKU-5 cable. Here is the output of `gnokii --identify':

~~~~
port_device: /dev/ttyUSB0
connection_type: 0
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 200
connect_script: 
disconnect_script: 
rfcomm_cn: 1
sm_retry: off
Connecting
Serial device: opening device /dev/ttyUSB0
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to low
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
SM_Block: exiting the retry loop
Serial device: opening device /dev/ttyUSB0
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to high
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
SM_Block: exiting the retry loop
Timeout: aborting command ``/usr/lib/gnokii/gnokii'' with signal 9
/usr/bin/gnokii: line 16:  5251 kill                  timeout $TIMEOUT $BINARY "$@"
~~~~

My .gnokiirc is below:
~~~~
[global]
port = /dev/ttyUSB0
model = 3100
initlength = default
connection = serial
use_locking = yes
serial_baudrate = 19200
smsc_timeout = 20
[gnokiid]
bindir = /usr/sbin/
[connect_script]
TELEPHONE = 12345678
[disconnect_script]
[logging]
debug = on
rlpdebug = off
xdebug = off
~~~~

What shall I do to make it work?
Thanks a lot!

Forrest