gnokii, 6680, osx: Problem occurred internal to model specific code

[Olivier Kaloudoff]

Hello list,

        I just tried latest gnapplet
(from users.szivarvanynet.hu/bozo/gnokii) with a 6680
via bluetooth.

        Strangely, gnapplet starts fine, but after --identify,
I have to restart it again. Can it be installed as a daemon, instead ?

        Here is the result of a --identify;

g3:~ kalou$ /opt/bin/gnokii --identify
GNOKII Version 0.6.12
LOG: debug mask is 0x1
phone instance config:
model: series60
port_device: 00:16:4E:19:F5:E9
connection_type: 5
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script:
disconnect_script:
rfcomm_cn: 14
sm_retry: off
Serial device: opening device 00:16:4E:19:F5:E9

2006-05-25 21:53:38.510 gnokii[10955] *** _NSAutoreleaseNoPool(): Object 
0x50b0c0 of class NSIdEnumerator autoreleased with no pool in place - just 
leaking
2006-05-25 21:53:38.511 gnokii[10955] *** _NSAutoreleaseNoPool(): Object 
0x503af0 of class IOBluetoothNotification autoreleased with no pool in 
place - just leaking
2006-05-25 21:53:38.511 gnokii[10955] *** _NSAutoreleaseNoPool(): Object 
0x50a800 of class NSCFArray autoreleased with no pool in place - just 
leaking
Message sent: 0x01 / 0x0002
00 01                                           |
Message received: 0x05 / 0x0064
00 02 00 00 00 2f 00 73 00 77 00 20 00 76 00 65 |      / s w   v e
00 72 00 73 00 69 00 6f 00 6e 00 3a 00 0a 00 56 |  r s i o n :   V
00 20 00 34 00 2e 00 30 00 34 00 2e 00 30 00 37 |    4 . 0 4 . 0 7
00 0a 00 32 00 32 00 2d 00 30 00 38 00 2d 00 30 |    2 2 - 0 8 - 0
00 35 00 0a 00 52 00 4d 00 2d 00 33 00 36 00 0a |  5   R M - 3 6
00 28 00 63 00 29 00 20 00 4e 00 4f 00 4b 00 49 |  ( c )   N O K I
00 41 00 2e                                     |  A .

Received message type 05
PHONE: sw version:
V 4.04.07
22-08-05
RM-36
(c) NOKIA.
Unsolicited frame, skipping...
Message received: 0x01 / 0x0058
00 02 00 00 00 00 00 06 00 05 00 4e 00 4f 00 4b |            N O K
00 49 00 41 00 05 00 52 00 4d 00 2d 00 33 00 36 |  I A   R M - 3 6
00 0f 00 33 00 35 00 38 00 33 00 35 00 38 00 30 |    3 5 8 3 5 8 0
00 30 00 30 00 38 00 33 00 35 00 31 00 30 00 38 |  0 0 8 3 5 1 0 8
00 07 00 34 00 2e 00 30 00 34 00 2e 00 30 00 37 |    4 . 0 4 . 0 7
00 03 00 32 00 35 00 36                         |    2 5 6
Received message type 01
gnapplet version: 0.6, gnokii driver: 0.18
Telephone interface init failed: Problem occurred internal to model 
specific code.
Quitting.


Is this output normal ?


Olivier