Re: Nokia 6100 gnokii 0.6.12 pl2303

[Pawel Kot]

Hi,

On 3/30/06, Pijus Magnificus <address@hidden> wrote:
> I have a nokia 6100 whith a usb cable reconized by linux 2.6.5-7.252-smp
> with a pl2303 module.
>  Mar 30 12:22:37 chrono-admin kernel: drivers/usb/serial/usb- serial.c: USB
> Serial support registered for Generic
> Mar 30 12:22:37 chrono-admin kernel: usbcore: registered new driver
> usbserial
> Mar 30 12:22:37 chrono-admin kernel: drivers/usb/serial/usb-serial.c: USB
> Serial Driver core v2.0
>  Mar 30 12:22:37 chrono-admin kernel: drivers/usb/serial/usb-serial.c: USB
> Serial support registered for PL-2303
>  Mar 30 12:22:37 chrono-admin kernel: pl2303 4-2:1.0: PL-2303 converter
> detected
> Mar 30 12:22:37 chrono-admin kernel: usb 4-2: PL-2303 converter now attached
> to ttyUSB0 (or usb/tts/0 for devfs)
> Mar 30 12:22:37 chrono-admin kernel: usbcore: registered new driver pl2303
>  Mar 30 12:22:37 chrono-admin kernel: drivers/usb/serial/pl2303.c: Prolific
> PL2303 USB to serial adaptor driver v0.10
> Serial write: transmitter busy, waiting
>  Serial write: transmitter ready

This is probably caused by the pl2303 driver. Did you patch the kernel
anyhow or is it vendor  kernel? If so, report problem to your
distribution vendor. There is nothing (IMHO) we can do about it at
gnokii level.

take care,
pkot
--
Pawel Kot
http://www.gnokii.org/