Can you please help on the USB connection

[Geoffrey Wang]

Dear Sir/Madam,

Any help is highly appreciated.

I connect a Nokia 6651 phone to my USB but cannot communicate with it. I can
see the following error messages.
1) My linux version:
Linux robotester14 2.4.22-RoboCustom #12 SMP Mon Mar 27 18:51:28 EST 2006
i686 i686 i386 GNU/Linux

2) /var/log/dmesg
usb.c: new device strings: Mfr=1, Product=2, SerialNumber=0
usb.c: USB device number 2 default language ID 0x409
Manufacturer: Nokia
Product: Nokia 6651
usb.c: unhandled interfaces on device
usb.c: USB device 2 (vend/prod 0x421/0x40e) is not claimed by any active
driver.
  Length              = 18
  DescriptorType      = 01
  USB version         = 1.10
  Vendor:Product      = 0421:040e
  MaxPacketSize0      = 64
  NumConfigurations   = 1
  Device version      = 3.08
  Device Class:SubClass:Protocol = 02:00:00

3) The dmesg command shows:
usbdevfs: USBDEVFS_CONTROL failed dev 5 rqt 128 rq 6 len 9 ret -6
usbdevfs: USBDEVFS_CONTROL failed dev 5 rqt 128 rq 6 len 348 ret -6
usbdevfs: USBDEVFS_CONTROL failed dev 5 rqt 128 rq 6 len 9 ret -6
usbdevfs: USBDEVFS_CONTROL failed dev 5 rqt 128 rq 6 len 18 ret -6
usbdevfs: USBDEVFS_CONTROL failed dev 5 rqt 128 rq 6 len 348 ret -6
usbdevfs: USBDEVFS_CONTROL failed dev 5 rqt 128 rq 6 len 348 ret -6
usbdevfs: USBDEVFS_CONTROL failed dev 5 rqt 128 rq 6 len 256 ret -32
usbdevfs: USBDEVFS_CONTROL failed dev 5 rqt 128 rq 6 len 256 ret -32

4) /proc/bus/usb
cat drivers
         usbdevfs
         hub
         acm
         usb-storage

cat devices
T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 0.00
S:  Product=USB UHCI-alt Root Hub
S:  SerialNumber=ff80
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  5 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=02(comm.) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0421 ProdID=040e Rev= 3.08
S:  Manufacturer=Nokia
S:  Product=Nokia 6651
C:* #Ifs=11 Cfg#= 1 Atr=e0 MxPwr=  8mA

5) under /proc/bus/usb/001
ls -ltr
total 1
-rw-r--r--    1 root     root           18 Mar 30 04:31 005
-rw-r--r--    1 root     root           18 Mar 30 04:31 001

so this means my Nokia is connect to the bus number 001 and device number is
001.

6)  gnokii --identify
INFO: Command Execution Proceeding....
FAILURE: Config Initialisation failed

Regards

Geoffrey