Re: .gnokiirc settings for Nokia 6015i with CA42 data cable?

[Pawel Kot]

Hi,

On 3/13/06, Walter Dnes <address@hidden> wrote:
>   I don't see any new entries in /dev.  Next, I went mucking around in
> "make menuconfig" under USB drivers.  I enabled usb-serial support *AS A
> MODULE*, and generic serial support.  After building and re-booting, I
> followed instructions in usb-serial.txt and did...
>
> mknod /dev/ttyUSB0 c 188 0
> ...followed by...
> > insmod /usr/src/linux-2.6.15-gentoo-r1/drivers/usb/serial/usbserial.ko 
> > vendor=0x6547 product=0x0232
>
> and later rmmod'd and tried...
> modprobe usbserial vendor=0x6547 product=0x0232

I think you should talk to linux usb people to determine which driver
supports your cable (if any). Once you have it working, you can try
gnokii.

take care,
pkot
--
Pawel Kot
http://www.gnokii.org/