[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
a few pointers please
From: |
r . velder |
Subject: |
a few pointers please |
Date: |
Wed, 05 Oct 2005 06:20:13 -0700 |
Greetings to all,
I've recently installed the cvs version of gnokii because I want to try to
create a system which can receive sms's, process them an send answers back
to the sender.Is gnokii a good starting point for communication with the gsm
phone or would you recommend something else.
I installed it on a suse 9 oes version with kernel 2.6.5-7.147-smp.
I'm using a nokia 6230i with a dku-2 cable. Untill now I've not been able to
do anything with the system. The gnokii --identify only gives me the
manufacturers name which I put in the gnokiirc file. I've read many
listings, but I haven't found anything that could direct me towards a
solution.
Below is a copy of the debug output:
gnokii --identify
GNOKII Version 20050926
LOG: debug mask is 0x1
phone instance config:
model: 6510
port_device: /dev/ttyS0
connection_type: 0
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script:
disconnect_script:
rfcomm_cn: 1
sm_retry: off
Connecting
Serial device: opening device /dev/ttyS0
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to low
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00 |
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00 |
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00 |
SM_Block: exiting the retry loop
Serial device: opening device /dev/ttyS0
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to high
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00 |
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00 |
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00 |
SM_Block: exiting the retry loop
Serial device: opening device /dev/ttyS0
Serial device: setting RTS to low and DTR to low
Serial device: setting RTS to high and DTR to high
Serial device: setting speed to 19200
Serial device: setting speed to 115200
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00 |
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00 |
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00 |
SM_Block: exiting the retry loop
Identifying...
Message sent: 0x1b / 0x0005
00 01 00 00 41 | A
Message sent: 0x1b / 0x0006
00 01 00 07 01 00 |
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00 |
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00 |
SM_Block: exiting the retry loop
IMEI : (unknown)
Manufacturer : Nokia
Model : (unknown)
Revision : (unknown)
Serial device: closing device
Hopefully somebody here can tell me what to do to get at least this
programme working.
Many thanx in advance
- a few pointers please,
r . velder <=