Re: Nokia 6230 over DKU2 connection

[Martina Wagner]

Same problem for me :(( The 6230 (Firmware V5.24) access via DKU2 (dku2/serial 
mode) still doesn't work for me :(( Only serial access using ttyACM0 is OK. I 
tried kernel 2.4.27 and 2.6.10, both the same result...

Earlier firmware version worked somehow. Did Nokia change the protocol?

Please find my log files below. Do you have a hint?

Gnooki log:

address@hidden:~# gnokii --identify
GNOKII Version 0.6.8
LOG: debug mask is 0x1
phone instance config:
model: 6230
port_device: /dev/ttyUSB0
connection_type: 9
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script:
disconnect_script:
rfcomm_cn: 1
sm_retry: off
Connecting
Serial device: opening device /dev/ttyUSB0
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
Identifying...
Message sent: 0x1b / 0x0005
00 01 00 00 41                                  |     A
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
IMEI         : (unknown)
Manufacturer : Nokia
Model        : (unknown)
Revision     : (unknown)
Serial device: closing device

/var/log/messages:

Sep 18 12:05:39 Linux kernel: hub.c: new USB device 00:02.0-2, assigned address 
4
Sep 18 12:05:39 Linux kernel: usbserial.c: Nokia 7600/6230/6230i DKU2 driver 
converter detected
Sep 18 12:05:39 Linux kernel: ttyACM0: USB ACM device
Sep 18 12:05:39 Linux kernel: usbserial.c: Nokia 7600/6230/6230i DKU2 driver 
converter detected
Sep 18 12:05:39 Linux last message repeated 7 times
Sep 18 12:05:39 Linux kernel: Nokia FBUS Port:
Sep 18 12:05:39 Linux kernel: usbserial.c: Nokia 7600/6230/6230i DKU2 driver 
converter now attached to ttyUSB0 (or usb/tts/0 for devfs)
Sep 18 12:05:44 Linux usb.agent[6265]:      nokia_dku2: already loaded
Sep 18 12:05:44 Linux usb.agent[6258]:      nokia_dku2: already loaded
Sep 18 12:05:44 Linux usb.agent[6256]:      nokia_dku2: already loaded
Sep 18 12:05:44 Linux usb.agent[6271]:      nokia_dku2: already loaded
Sep 18 12:05:44 Linux usb.agent[6272]:      nokia_dku2: already loaded
Sep 18 12:05:44 Linux usb.agent[6320]:      nokia_dku2: already loaded
Sep 18 12:05:44 Linux usb.agent[6328]:      nokia_dku2: already loaded
Sep 18 12:05:44 Linux usb.agent[6298]:      nokia_dku2: already loaded
Sep 18 12:05:44 Linux usb.agent[6322]:      nokia_dku2: already loaded
Sep 18 12:05:44 Linux usb.agent[6297]:      nokia_dku2: already loaded
Sep 18 12:05:45 Linux usb.agent[6264]:      nokia_dku2: already loaded
Sep 18 12:05:45 Linux usb.agent[6256]:      acm: already loaded
Sep 18 12:05:45 Linux usb.agent[6272]:      acm: already loaded
Sep 18 12:05:45 Linux usb.agent[6320]:      acm: already loaded
Sep 18 12:05:45 Linux usb.agent[6271]:      acm: already loaded
Sep 18 12:05:45 Linux usb.agent[6297]:      acm: already loaded
Sep 18 12:05:45 Linux usb.agent[6298]:      acm: already loaded
Sep 18 12:05:45 Linux usb.agent[6264]:      acm: already loaded
Sep 18 12:05:45 Linux usb.agent[6258]:      acm: already loaded
Sep 18 12:05:45 Linux usb.agent[6265]:      acm: already loaded
Sep 18 12:05:46 Linux usb.agent[6328]:      acm: already loaded
Sep 18 12:05:46 Linux usb.agent[6322]:      acm: already loaded


"Discussion forum for gnokii users." <address@hidden> schrieb am 31.08.05 
20:52:59:
> 
> Hello,
> 
> I'm trying to access a Nokia 6230 through a DKU2 cable attached to the USB 
> port of a machine running Fedora Core 2. Ideally I'd like access to all of 
> the phone's contents - address book, calendar, SMS contents, filesystem. 
> Read-only would be fine. The trouble is, I can't get it working...
> 
> I've put a description of the steps I've taken so far below. Any advice 
> would be greatly appreciated. Thank you. (Please forgive any linux naivety 
> - I'm a recent new user)
> 
> Dan
> 
> ...
> I've compiled the kernel patch in patches/kernel2_6 and installed it. I 
> then do:
> 
> modprobe nokia_dku2
> 
> dmesg gives me (amongst other things...):
> 
> ...
> Nokia DKU2 Driver
> usb 1-1: new full speed USB device using address 2
> usbserial: probe of 1-1:1.0 failed with error -1
> Nokia DKU2: probe of 1-1:1.0 failed with error -1
> usbserial: probe of 1-1:1.1 failed with error -1
> Nokia DKU2: probe of 1-1:1.1 failed with error -1
> Nokia AT Port:
> usbserial 1-1:1.2: Nokia 7600/6230/6230i/6170 DKU2 driver converter 
> detected
> usb 1-1: Nokia 7600/6230/6230i/6170 DKU2 driver converter now attached to 
> ttyUSB0 (or usb/tts/0 for devfs)
> usbserial: probe of 1-1:1.3 failed with error -1
> Nokia DKU2: probe of 1-1:1.3 failed with error -1
> usbserial: probe of 1-1:1.4 failed with error -1
> Nokia DKU2: probe of 1-1:1.4 failed with error -1
> usbserial: probe of 1-1:1.5 failed with error -1
> Nokia DKU2: probe of 1-1:1.5 failed with error -1
> usbserial: probe of 1-1:1.6 failed with error -1
> Nokia DKU2: probe of 1-1:1.6 failed with error -1
> usbserial: probe of 1-1:1.7 failed with error -1
> Nokia DKU2: probe of 1-1:1.7 failed with error -1
> usbserial: probe of 1-1:1.8 failed with error -1
> Nokia DKU2: probe of 1-1:1.8 failed with error -1
> usbserial: probe of 1-1:1.9 failed with error -1
> Nokia DKU2: probe of 1-1:1.9 failed with error -1
> Nokia FBUS Port:
> usbserial 1-1:1.10: Nokia 7600/6230/6230i/6170 DKU2 driver converter 
> detected
> usb 1-1: Nokia 7600/6230/6230i/6170 DKU2 driver converter now attached to 
> ttyUSB1 (or usb/tts/1 for devfs)
> ...
> 
> My configuration file looks like this:
> port = /dev/ttyUSB1
> model = 6510
> connection = dku2
> initlength = default
> use_locking = yes
> serial_baudrate = 19200
> smsc_timeout = 50
> 
> I then try:
> gnokii --identify
> 
> Which returns:
> GNOKII Version 0.6.8
> IMEI:                          (unknown)
> Manufacturer:         Nokia
> Model:                      (unknown)
> Revision:                 (unknown)
> 
> Any further attempts to access the phone's contents fall over. Oddly, if I 
> alter a few configuration file settings like so:
> port = /dev/ttyUSB0
> model = AT
> connection = serial
> 
> I can then identify the phone a lot more successfully: gnokii --identify 
> returns:
> GNOKII Version 0.6.8
> IMEI:                          355665008141773
> Manufacturer:         Nokia
> Model:                      Nokia 6230
> Revision:                 V 05.35
> 
> However, the AT interface won't let me access calendar entries, SMS etc...
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> _______________________________________________
> gnokii-users mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/gnokii-users


______________________________________________________________
Verschicken Sie romantische, coole und witzige Bilder per SMS!
Jetzt bei WEB.DE FreeMail: http://f.web.de/?mc=021193