[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: smsd segmentation fault!

From: tasos
Subject: Re: smsd segmentation fault!
Date: Mon, 28 Mar 2005 04:49:53 -0800 (PST)

(gdb) set args -u x-p x-d x-c x -m mysql -l
/usr/share/smsd -f /testit.txt2
(gdb) run
Starting program: /usr/sbin/smsd -u x-p x-d x-c x -m
mysql -l /usr/share/smsd -f /testit.txt2
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
[Thread debugging using libthread_db enabled]
[New Thread -1210961792 (LWP 3295)]
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
[New Thread -1211749456 (LWP 3298)]
Lockfile /var/lock/LCK..ttyS0 is stale. Overriding
[New Thread -1220138064 (LWP 3299)]

Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread -1220138064 (LWP 3299)]
0xb7d9c290 in strncpy () from /lib/tls/
(gdb) bt
#0  0xb7d9c290 in strncpy () from /lib/tls/
#1  0xb7fe74fe in DB_Look () from
#2  0x0804a338 in LoadDB ()
#3  0xb7e5db63 in start_thread () from
#4  0xb7dfbc4a in clone () from /lib/tls/
(gdb) output at testit.txt

# This is a sample ~/.gnokiirc file.  Copy it into
# home directory and name it .gnokiirc.


# Set port to the physical serial port used to connect
to your phone.
# Linux version is:
port = /dev/ttyS0
# For MacOSX you will need something like:
# port = /dev/cu.USA28X1P1.1
# Use this setting also for the Bluetooth connection:
# port = aa:bb:cc:dd:ee:ff
# Set model to the model number of your phone
model = 6310

# Initlength controls the number of characters sent to
# phone during initialisation.  You can either set it
# the word "default" or a positive integer.
# You can try setting this value if you want to
# to the phone quicker.  If you've never noticed the
# connection to be slow, it is suggested that you 
# leave this alone.  Read the initialisation code in
# to understand what this changes if you're curious.
initlength = default

# The type of the connection, for IR set this to
infrared or irda.
# For the nk6110 driver only infrared is valid for the
IrDA connection.
# See Docs/gnokii-ir-howto for more detailes on this.
# If you have 6210/6250/7110 phone and dau9p cable
(the one you can
# use with 6100 series and cannot use hardware modem
from the phone)
# you may want to use 'dau9p' value to get faster
# If you use dlr3 or dlr3p cable for nokia phones in
FBUS mode (ie.
# you don't use model = AT) you may want to use
'dlr3p' value here.
# Note that it is recommended and currently the best
way to use this
# cable with nk6510 driver.
#connection = serial
connection = dlr3p

# Set this to 'yes' if you want gnokii to set and
check the lock file in
# /var/lock directory. It avoids potential conflicts
with other serial
# port software (eg. minicom). If you have wrong
permissions for the
# directory, a warning will be generated. If you don't
want a lockfile, set
# it to 'no'.
use_locking = yes

# Baudrate to use on serial port connections.
# Currently used only by models AT and BIP/CIMD.
Defaults to 19200.
#serial_baudrate = 19200
serial_baudrate = 115200

# Force waiting after each send character the
specified usec time.
# Value -1 forces the fastest 'block' writing,
# value 0 writes each character separately without any
explicite waiting,
# other positive values specify the appropriate
1/1000000 sec delaying.
# Siemens M20 requires at least "1"!  FIXME:
Model-driven autodetection
#serial_write_usleep = 10000

# Force serial port handshaking mode, useful primarily
for "AT" model.
# Gnokii "AT" model uses software handshake by
# Possible values: hardware (RTS/CTS - 7 wires) or
software (XON/XOFF - 3 wires)
#handshake = software

# If defined (not commented out by '#') it will quit
Gnokii anytime
# when DCD line will drop.
#require_dcd = 1

# If you are using a bluetooth connection, you can
specify the rfcomm
# channel number here. Default value is 1.
#rfcomm_channel = 1

# Run the specified script(s) right after opening and
initializing the device
# and before any communucation (right before closing
for disconnect_script).
# You may find handy to use it to connect your modem
to SMS Center
# when using BIP or CIMD protocols
# Non-absolute path is relative to the specific
directory where gnokii is run!
#connect_script =
#disconnect_script =

# When sending SMS you can experience timeouts. This
is the feature of the
# overloaded SMSCs. The phones waits for the response
from the SMSC confirming
# that it received the short message. When the SMSC is
DoSed with many requests
# it will take more time to get the response. Adjust
it to your needs. The
# value is given in seconds to wait. Defaults to 10
seconds. Set to 0 to wait
# forever.
smsc_timeout = 10

# Set bindir to point to the location of the various
gnokiid binaries.
# In particular ensure that mgnokiidev is in this
location, with
# permissions 4750, owned by root, group gnokii. 
Ensure you
# are in the gnokii group and that the group exists...
bindir = /usr/sbin/

# Any entries in the following two sections will be
set as environment
# variables when running the scripts.
# Handy for use for $VAR substitutions in your chat(8)
TELEPHONE = 12345678

# The following parameters control how libgnokii
handle the debugging messages.
# Currently there are three categories: "debug"
controls the libgnokii
# normal debug output, "rlpdebug" controls the debug
output of the RLP
# subsystem, and "xdebug" is used by the xgnokii or


# where to log the debug output (on: stderr)
debug = off

# where to log the rlp debug output (on: stderr)
rlpdebug = off

# where to log X debug output (on: stderr)
xdebug = off

--- Pawel Kot <address@hidden> wrote:
> On Mon, 28 Mar 2005, tasos wrote:
> > Hello people.I have a problem with smsd.
> > I'm running
> > /usr/sbin/smsd -u x -p x -d x -c x -m mysql -l
> > /usr/share/smsd/  -f /testit.txt
> > and i get segmentation fault.
> > output from
> Any chance for:
> 1. backtrace
> 2. testit.txt contents
> 3. gnokiirc
> ?
> take care,
> pkot
> -- 
> p k o t a t b e z s e n s u d o t p l
> _______________________________________________
> gnokii-users mailing list
> address@hidden

Do you Yahoo!? 
Yahoo! Small Business - Try our new resources site! 

reply via email to

[Prev in Thread] Current Thread [Next in Thread]