Re: 8110 (2501) & smsd

[Marco]

>> >> Mobile Phone Identification:
>> >>    IMEI: XXXXXXXXXXXXXXX
>> >>    Model: 2501
>> >>    Revision: 0501361
.> >> comparing "2501" and ""
>> >> comparing "2501" and "?????"
.> >> comparing "2501" and "?????"
.> >> comparing "2501" and "TFF-3"
.> >> <cut>~520 other similar lines</cut>
>> >> comparing "2501" and "NHX-7"
>> >> comparing "2501" and "SX1"
>> >
>> > Goto common/misc.c file and find the record describing 8110 model.
>> Copy
>> > the line replacing 8110 with 2501.
>>
>> Done.
>> Now I get "Found model "2501" but after this message there is a never
>> ending list of
>> "GN_OP_GetSMSStatus at line 411 in file lowlevel.c returns error 5"
>> What can I do?
>
> what do the following command show:
> gnokii --identify
> gnokii --getsms ME 1
> gnokii --getsms SM 1

 

Dear Pawel,

first of all thank you very much for helping!

 

Here are in attachment the logs for:

-gnokii --identify

-gnokii --getsms SM 1

-gnokii --getsms ME 1

(sorry for some censoring...)

 

Another info, if it can help: even if smsd continuously produces

"GN_OP_GetSMSStatus at line 411 in file lowlevel.c returns error 5"

it works fine while sending sms.

 

This is what happened after an insert in "outbox" on mysql DB:

.

..

...

GN_OP_GetSMSStatus at line 411 in file lowlevel.c returns error 5

GN_OP_GetSMSStatus at line 411 in file lowlevel.c returns error 5

GN_OP_GetSMSStatus at line 411 in file lowlevel.c returns error 5
GN_OP_GetSMSStatus at line 411 in file lowlevel.c returns error 5
Getting SMS info...
Message sent: 0x3f / 0x0000
<-- 01:02:3f:12:2e:
--> 04:02:13:32:27:
<-- 01:02:13:0a:1a:
Acknowledged message type 13.
Message received: 0x13 / 0x0002
13 32                                           |  2
Received message type 13
SM_Block Retry - 0
Message sent: 0x3f / 0x0000
<-- 01:02:3f:12:2e:
--> 04:02:3f:0a:33:
Received ack for message type 0x3f
--> 04:1c:41:33:02:01:00:05:00:00:00:a7:01:01:00:0d:2b:33:39:33:34:39:32:30:30:3
0:32:30:30:01:e8:
<-- 01:02:41:0b:49:
Acknowledged message type 41.
Message received: 0x41 / 0x001c
41 33 02 01 00 05 00 00 00 a7 01 01 00 0d 2b 33 | A3            +3
39 33 34 39 32 30 30 30 32 30 30 01             | 93492000200
Received message type 41
SMS Message Center Data:
   Selected memory: 0x02
   Messages in Phone: 0x01 Unread: 0x00
   Messages in SIM: 0x05 Unread: 0x00
   Reply via own centre: 0x01 (No)
   Delivery reports: 0x01 (No)
   Messages sent as: 0x00
   Message validity: 0xa7
   Unknown: 0x00
   UnknownNumber:
   Message center number: +393492000200
General Data Coding
dcs: 0x0
Length: 0x18
user_data_length: 0x15
ValidityIndicator: 2
user_data: 50F9DB1E0691D3A0B4DB9E7E83DAE5F93C7C3EA7DF
Sending
smsc:'+393492000200' remote:'+39XXXXXXXXXX'
First Octet: 11
Message sent: 0x23 / 0x0027
11 00 00 a9 00 00 00 00 00 00 18 0d 2b 33 39 33 |             +393
34 39 32 30 30 30 32 30 30 0d 2b 33 39 XX XX XX | 492000200 +39XXX
XX XX XX XX XX XX XX                            | XXXXXXX
<-- 01:29:23:13:11:00:00:a9:00:00:00:00:00:00:18:0d:2b:33:39:33:34:39:32:30:30:3
0:32:30:30:0d:2b:33:39:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:be:
--> 04:02:23:0b:2e:
Received ack for message type 0x23
Message sent: 0x27 / 0x0019
01 50 72 6f 76 61 20 64 69 20 69 6e 76 69 6f 20 |  Prova di invio
6d 65 73 73 61 67 67 69 6f                      | messaggio
<-- 01:1b:27:14:01:50:72:6f:76:61:20:64:69:20:69:6e:76:69:6f:20:6d:65:73:73:61:6
7:67:69:6f:47:
SMS data sent, waiting for result...
--> 04:02:27:0c:2d:
Received ack for message type 0x27
--> 04:03:28:34:02:19:
<-- 01:02:28:0c:27:
Acknowledged message type 28.
Message received: 0x28 / 0x0003
28 34 02                                        | (4
Received message type 28
SMS send OK (0x02)
GN_OP_GetSMSStatus at line 411 in file lowlevel.c returns error 5
GN_OP_GetSMSStatus at line 411 in file lowlevel.c returns error 5
...

..

.

 

And the SMS was correctly received!

But when I replied from my mobile... nothing happened from DB side.. :-(

(even if the phone connected to the PC displays "Message received").

Note that stopping smsd and running "gnokii --getsms SM 6" I got the reply...

 

Bye,

Marco

getsmsSM.log
Description: Binary data

getsmsME.log
Description: Binary data

identify.log
Description: Binary data