gnokii-users
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Nokia 6610i


From: vee . lehtinen
Subject: Nokia 6610i
Date: Mon, 23 Aug 2004 02:27:58 +0300 (EEST)

I need someone to give me instructions to get Nokia 6610i to work with USB to
serial converter.  I can try to provide any information required for the
development.  6610i does not differ much from 6610 by appearance, but having a
camera and some other improvements might shuffle the deck.

I've already made these changes to gnokii source code:
  common/phones/nk6510.c - added: |6610i
  common/misc.c - added: {"6610i", "RM-37", 0 },

I've loaded these modules:
  usb-uhci
  ehci-hcd
  usbserial - debug=1 vendor=0x067b product=0x2303
  pl2303 - debug=1

/etc/gnokiirc setup:
  [global]
  port = /dev/ttyUSB0
  model = 6610i
  initlength = default
  connection = serial
  handshake = hardware
  require_dcd = 0
  rfcomm_channel = 0
  smsc_timeout = 10
  debug = on
  rlpdebug = on

When running gnokii --identify, my syslog gets filled with duplications of the
following lines:
  usbserial.c: __serial_write - port 0, 1 byte(s)
  usbserial.c: port_softint - port 0
  usbserial.c: generic_write_room - port 0, returns 64
  usbserial.c: generic_chars_in_buffer - port 0
  usbserial.c: generic_chars_in_buffer - returns 0
  usbserial.c: serial_write_room - port 0

There are some other lines like "usbserial.c: serial_ioctl - port 0, cmd
0x5401", too..

Gnokii itself repeats these lines:
  Serial write: transmitter ready
  Serial write: transmitter busy, waiting
  SM_Block Retry - 1
  Message sent: 0x1b / 0x0006
  00 01 00 07 01 00                               |

When --identify comes to an end, gnokii says:
  IMEI         : (unknown)
  Manufacturer : Nokia
  Model        : (unknown)
  Revision     : (unknown)

Help?




reply via email to

[Prev in Thread] Current Thread [Next in Thread]