Re: help in implementing IrDA & Gnokii

[ruud koendering]

On Tuesday 06 July 2004 16:52, Simon Huggins wrote:
> On Tue, Jul 06, 2004 at 04:35:59PM +0200, ruud koendering wrote:
> > On Tuesday 06 July 2004 16:30, Simon Huggins wrote:
> > > On Tue, Jul 06, 2004 at 03:55:12PM +0200, ruud koendering wrote:
> > > > Mandrake 10.0 Linux recognize it as "UHCI Host Controller (1) >
> > > > IRExpress USB IrDA Controller ". i.e. Mandrake knows IrDA.
> > > >
> > > > Question: How to check if IrDA is working?
> > >
> > > irdadump should tell you that.  Did you read Docs/gnokii-IrDA-Linux?
> >
> > irdadump not running!  (kernel starts IrDA)
>
> As in you run it and nothing happens or it doesn't run and errors or
> what?
>
Nothing happens Control-C stops the program....

> When you plug in your USB IrDA adaptor does it get recognised?  What
> does dmesg say when you do?
>

Linux version 2.6.3-14mdk (address@hidden) (gcc version 3.3.2 
(Mandrake Linux 10.0 3.3.2-6mdk)) #1 Fri Jun 18 01:22:49 MDT 2004
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
 BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000c0000 - 00000000000cc000 (reserved)
 BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000000eef0000 (usable)
 BIOS-e820: 000000000eef0000 - 000000000eeff000 (ACPI data)
 BIOS-e820: 000000000eeff000 - 000000000ef00000 (ACPI NVS)
 BIOS-e820: 000000000ef00000 - 000000000f000000 (usable)
 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
240MB LOWMEM available.
On node 0 totalpages: 61440
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 57344 pages, LIFO batch:14
  HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 PTLTD                                     ) @ 0x000f6dd0
ACPI: RSDT (v001 PTLTD    RSDT   0x06040000  LTP 0x00000000) @ 0x0eefb63b
ACPI: FADT (v001 COMPAQ  EAGLES  0x06040000 PTL_ 0x000f4240) @ 0x0eefeeb6
ACPI: SSDT (v001 PTLTD  POWERNOW 0x06040000  LTP 0x00000001) @ 0x0eefef2a
ACPI: DSDT (v001 COMAPQ   EAGLES 0x06040000 MSFT 0x0100000d) @ 0x00000000
ACPI: Vendor "COMAPQ" System "  EAGLES" Revision 0x6040000 has a known ACPI 
BIOS problem.
ACPI: Reason: SCI issues (C2 disabled). This is a recoverable error
ACPI: PM-Timer IO Port: 0x8008
Built 1 zonelists
Kernel command line: BOOT_IMAGE=263-14 ro root=301 noapic nolapic acpi=on 
devfs=mount resume=/dev/hda5 splash=silent
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 1024 (order 10: 8192 bytes)
Detected 996.686 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Memory: 239120k/245760k available (1816k kernel code, 5824k reserved, 849k 
data, 272k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 1974.27 BogoMIPS
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
checking if image is initramfs...it isn't (no cpio magic); looks like an 
initrd
Freeing initrd memory: 103k freed
CPU:     After generic identify, caps: 0383f9ff c1cbf9ff 00000000 00000000
CPU:     After vendor identify, caps: 0383f9ff c1cbf9ff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 64K (64 bytes/line)
CPU:     After all inits, caps: 0383f9ff c1cbf9ff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD mobile AMD Duron(tm) Processor stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xfd7ae, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040211
Looking for DSDT in initrd ... not found!
ACPI: IRQ10 SCI: Edge set to Level Trigger.
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
Disabling VIA memory write queue (PCI ID 0305, rev 80): [55] 3c & 1f -> 1c
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *4)
ACPI: PCI Interrupt Link [LNKB] (IRQs *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs *5)
ACPI: PCI Interrupt Link [LNKD] (IRQs *9)
ACPI: Embedded Controller [EC] (gpe 6)
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Disabled
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 4
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 
'acpi=off'
vesafb: framebuffer at 0xf0000000, mapped to 0xcf80b000, size 15296k
vesafb: mode is 800x600x16, linelength=1600, pages=14
vesafb: protected mode interface info at c000:7e56
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
fb0: VESA VGA frame buffer device
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
ikconfig 0.7 with /proc/config*
VFS: Disk quotas dquot_6.5.1
devfs: 2004-01-31 Richard Gooch (address@hidden)
devfs: boot_options: 0x1
Initializing Cryptographic API
Applying VIA southbridge workaround.
PCI: Disabling Via external APIC routing
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
bootsplash 3.1.4-2004/02/19: looking for picture... no good signature found.
Console: switching to colour frame buffer device 100x37
pty: 1024 Unix98 ptys configured
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:07.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt82c686b (rev 42) IDE UDMA100 controller on pci0000:00:07.1
    ide0: BM-DMA at 0x1840-0x1847, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x1848-0x184f, BIOS settings: hdc:DMA, hdd:pio
hda: TOSHIBA MK2018GAP, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: TOSHIBA DVD-ROM SD-C2502, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 39070080 sectors (20003 MB), CHS=38760/16/63, UDMA(100)
 /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 >
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
synaptics reset failed
synaptics reset failed
synaptics reset failed
Synaptics Touchpad, model: 1
 Firmware: 5.8
 180 degree mounted touchpad
 Sensor: 29
 new absolute packet format
 Touchpad has extended capability bits
 -> 4 multi-buttons, i.e. besides standard buttons
 -> multifinger detection
 -> palm detection
input: SynPS/2 Synaptics TouchPad on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
EISA: Probing bus 0 at eisa0
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
NET: Registered protocol family 1
BIOS EDD facility v0.13 2004-Mar-09, 1 devices found
Please report your BIOS at http://linux.dell.com/edd/results.html
Resume Machine: resuming from /dev/hda5
Resuming from device hda5
Resume Machine: This is normal swap space
PM: Reading pmdisk image.
PM: Resume from disk failed.
ACPI: (supports S0 S3 S4 S5)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Mounted devfs on /dev
Freeing unused kernel memory: 272k freed
Real Time Clock Driver v1.12
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver 
v2.1
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: irq 9, io base 00001800
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usb 1-1: new full speed USB device using address 2
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
drivers/usb/core/usb.c: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
EXT3 FS on hda1, internal journal
Adding 506008k swap on /dev/hda5.  Priority:-1 extents:1
usb 1-2: new low speed USB device using address 3
drivers/usb/core/usb.c: registered new driver hiddev
usb 1-1.1: new full speed USB device using address 4
drivers/usb/input/hid-ff.c: hid_ff_init could not find initializer
input: USB HID v1.00 Mouse [Logitech USB-PS/2 Mouse] on usb-0000:00:07.2-2
drivers/usb/core/usb.c: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 
proto 2 vid 0x03F0 pid 0x7104
drivers/usb/core/usb.c: registered new driver usbmouse
drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
ts: Compaq touchscreen protocol output
usb 1-1.3: new full speed USB device using address 5
input: PC Speaker
SCSI subsystem initialized
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
  Vendor: IOMEGA    Model: ZIP 100           Rev: 79.E
  Type:   Direct-Access                      ANSI SCSI revision: 02
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 5
drivers/usb/core/usb.c: registered new driver usb-storage
USB Mass Storage support registered.
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
agpgart: Maximum main memory to use for agp memory: 190M
agpgart: AGP aperture is 64M @ 0xec000000
sda: Spinning up disk...<6>kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Supermount version 2.0.4 for kernel 2.6
.........ready
SCSI device sda: 196608 512-byte hdwr sectors (101 MB)
sda: assuming Write Enabled
sda: assuming drive cache: write through
 /dev/scsi/host0/bus0/target0/lun0: p4
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
8139too Fast Ethernet driver 0.9.27
eth0: RealTek RTL8139 at 0xd0731000, 00:08:02:05:eb:63, IRQ 11
eth0:  Identified 8139 chip type 'RTL-8139C'
ACPI: Battery Slot [BAT0] (battery present)
ACPI: AC Adapter [AC] (on-line)
ACPI: Processor [CPU0] (supports C1 C2, 16 throttling states)
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Lid Switch [LID]
Linux Kernel Card Services
  options:  [pci] [cardbus] [pm]
Yenta: CardBus bridge found at 0000:00:0a.0 [0e11:b103]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:0a.0, mfunc 0x01001002, devctl 0x64
Yenta: ISA IRQ mask 0x0008, PCI irq 11
Socket status: 30000020
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
ohci_hcd 0000:02:00.0: OHCI Host Controller
PCI: Setting latency timer of device 0000:02:00.0 to 64
ohci_hcd 0000:02:00.0: irq 11, pci mem d07e0000
ohci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
PCI: Enabling device 0000:02:00.1 (0000 -> 0002)
ohci_hcd 0000:02:00.1: OHCI Host Controller
PCI: Setting latency timer of device 0000:02:00.1 to 64
ohci_hcd 0000:02:00.1: irq 11, pci mem d0853000
ohci_hcd 0000:02:00.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 2-1: new full speed USB device using address 2
PCI: Enabling device 0000:02:00.2 (0000 -> 0002)
ehci_hcd 0000:02:00.2: EHCI Host Controller
ehci_hcd 0000:02:00.2: irq 11, pci mem d0733000
ehci_hcd 0000:02:00.2: new USB bus registered, assigned bus number 4
ehci_hcd 0000:02:00.2: USB 2.0 enabled, EHCI 0.95, driver 2003-Dec-29
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
usb 2-1: can't set config #1, error -110
usb 2-1: new full speed USB device using address 3
NET: Registered protocol family 23
IRDA-USB found at address 3, Vendor: 50f, Product: 180
IrDA: Registered device irda0
drivers/usb/core/usb.c: registered new driver irda-usb
USB IrDA support registered
drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
drivers/usb/core/usb.c: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
drivers/usb/serial/usb-serial.c: USB Serial support registered for IR Dongle
drivers/usb/core/usb.c: registered new driver ir-usb
drivers/usb/serial/ir-usb.c: USB IR Dongle driver v0.4
inserting floppy driver for 2.6.3-14mdk
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
hdc: ATAPI 24X DVD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
NET: Registered protocol family 17
eth0: link up, 10Mbps, half-duplex, lpa 0x0000
PCI: Setting latency timer of device 0000:00:07.5 to 64
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport_pc: Via 686A parallel port: io=0x378
lp0: using parport0 (polling).
lp0: console ready
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 0
ksensors: numerical sysctl 7 2 1 is obsolete.
NET: Registered protocol family 10
Disabled Privacy Extensions on device c0360a00(lo)
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
address@hidden ruud]#

> Did you run irattach?  Try irattach irda0 -s before you run irdadump


Doing nothing!
-- 

Vriendelijke groeten / Kind regards,

R.P.M. Koendering

De Wickelaan 11
2265 DG  Leidschendam - Voorbrug
Nederland / Netherlands
____________________________________
Phone: +31 (0)70 3271506
____________________________________
E-Mail: address@hidden