[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Incoming data call

From: Jonathan Roadley-Battin
Subject: Re: Incoming data call
Date: Wed, 21 Aug 2002 07:28:08 -0500

ER im not sure abt this but the 6310 is just an improved 6210. on the 6210 
under menu-settings-call setting- fax and data. you can set an incomming data 
number - try adding your work's ISP number there

----- Original Message -----
From: Koen Tavernier <address@hidden>
Date: 21 Aug 2002 12:02:22 +0100 
To: address@hidden
Subject: Incoming data call

> Hi all,
> I would like to use a 6310 at a remote site and dial it up for a ppp
> connection. I can establish a ppp connection very easily from the phone
> to any isp provider, however the other way round doesn't work.
> I use mgetty with AutoPPP which is properly setup because a normal modem
> connected to the computer establishes a ppp connection on an incoming
> call. However with the 6310 connected to the computer, it answers the
> call after the required number of rings, but the treats the call as a
> voice call (leaves the microphone connected) and does not try to
> establish a data call. I've tried this both with direct access to
> /dev/ttyS1 or using gnokiid and having mgetty access /dev/gnokii. Do I
> need to tell the 6310 to only accept a data call (and how do I do that)
> or are incoming data calls just not possible?
> Thanks in advance,
> Koen.
> _______________________________________________
> gnokii-users mailing list
> address@hidden

Sign-up for your own FREE Personalized E-mail at

reply via email to

[Prev in Thread] Current Thread [Next in Thread]