[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Gnewsense-dev] Closing Yeelong cover fails to shut off display
From: |
samy boutayeb |
Subject: |
Re: [Gnewsense-dev] Closing Yeelong cover fails to shut off display |
Date: |
Sun, 27 Dec 2009 16:47:39 +0100 |
Le dimanche 27 décembre 2009 à 23:30 +0800, Wu Zhangjin a écrit :
> >
>
> Sorry, I have not enabled the yeeloong_ecrom module with 2.6.32 for it
> is very "dangerous" to write the ec rom, If you really want to try it,
> please compile the module:
>
> arch/mips/loongson/lemote-2f/yeeloong_ecrom.c
>
> but I have never tested it with 2.6.32, so, please use 2.6.31(Have been
> tested) and 2.6.27.
>
> Best Regards,
> Wu Zhangjin
>
Thank you Wu Zhangjin for the warning!
I prefer not to risk to brick the Yeeloongn, without knowing of a rescue
procedure!
By the way, is there a procedure to unbrick a machine after a failed ec
or pmon upgrade? The Yeeloong has a undocumented connector (with 4 pins)
inside the hard disk enclosure, near the battery. Does it could be used
to repair a damaged unit?
Regards,
Samy
>
Re: [Gnewsense-dev] Closing Yeelong cover fails to shut off display, Lars Nooden, 2009/12/27
Re: [Gnewsense-dev] Closing Yeelong cover fails to shut off display, zhangfx, 2009/12/27
Re: [Gnewsense-dev] Closing Yeelong cover fails to shut off display, Richard Stallman, 2009/12/28