Re: [gcmd-dev] Compiling on different platforms

[Stefan Czinczoll]

Hi Uwe & all,

I can confirm now that gnome-commander 1.14.0 also compiles and runs on 
a fresh, recent Manjaro system. :-)

Unfortunately this does not apply to my main productive environment, 
which is also running Manjaro. Here's the output:

$ ./autogen.sh
*** WARNING: I am going to run 'configure' with no arguments.
*** If you wish to pass any to it, please specify them on the
*** './autogen.sh' command line.

autoreconf: export WARNINGS=
autoreconf: Entering directory '.'
autoreconf: running: autopoint --force
Copying file po/Makevars.template
autoreconf: running: aclocal --force --install -I m4
autoreconf: configure.ac: tracing
autoreconf: running: libtoolize --copy --force
libtoolize: putting auxiliary files in '.'.
libtoolize: copying file './ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'.
libtoolize: copying file 'm4/libtool.m4'
libtoolize: copying file 'm4/ltoptions.m4'
libtoolize: copying file 'm4/ltsugar.m4'
libtoolize: copying file 'm4/ltversion.m4'
libtoolize: copying file 'm4/lt~obsolete.m4'
autoreconf: configure.ac: not using Intltool
autoreconf: configure.ac: not using Gtkdoc
autoreconf: running: aclocal --force --install -I m4
autoreconf: running: /usr/bin/autoconf --force
autoreconf: running: /usr/bin/autoheader --force
autoreconf: running: automake --add-missing --copy --force-missing
configure.ac:5: error: version mismatch.  This is Automake 1.16.5,
configure.ac:5: but the definition used by this AM_INIT_AUTOMAKE
configure.ac:5: comes from Automake 1.15.  You should recreate
configure.ac:5: aclocal.m4 with aclocal and run automake again.
configure.ac:12: installing './compile'
configure.ac:5: installing './missing'
libgcmd/Makefile.am: installing './depcomp'
tests/Makefile.am:94: warning: source file 
'$(top_srcdir)/src/utils-no-dependencies.cc' is in a subdirectory,
tests/Makefile.am:94: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.


Any ideas please?

Kind regards

Stefan


Am 28.11.21 um 18:28 schrieb Uwe Scholz:
> Am Sun, 28 Nov 2021 18:16:54 +0100 schrieb Stefan Czinczoll:
> > Hi Uwe,
> >
> > many thanks for your fast support! :-)
> >
> > I found that the library dir had root permissions only.
> >
> > The files had been installed correctly. So I did the following:
> >
> > $ cd /usr/local/lib
> > $ chmod -R go+rx gnome-commander
> >
> > After that, I tried to start the program:
> >
> > $ gnome-commander
> >
> > However, the resulting errors are very familiar compared to my attempts
> > with snap:
> >
> >
> > $ gnome-commander
> >
> > [...]
> >
> > ** (gnome-commander:3032): WARNING **: 18:12:00.468: Can’t find the
> > pixmap anywhere. Make sure you have installed the program or is
> > executing gnome-commander from the gnome-commander-1.13.0/src directory
> > Could not load schemas from /usr/local/share/glib-2.0/schemas: Failed to
> > open file “/usr/local/share/glib-2.0/schemas/gschemas.compiled”: open()
> > failed: Keine Berechtigung
>    ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>
> > (gnome-commander:3032): GLib-GIO-CRITICAL **: 18:12:00.468:
> > g_settings_schema_source_lookup: assertion 'source != NULL' failed
> >
> > [...]
>
> It looks as if something in the installation did not work correctly.
> Can you check the output of "make install" again and scan it for
> errors? It looks to me as if the schema files for GSettings are not
> installed in the user settings file. Gcmd can not open it's default
> settings in that case.
>
> The installation step should happen nearly at the end of "make
> install". This is how it looks for me:
>
> [...]
>   if test -n "org.gnome.gnome-commander.gschema.xml 
> org.gnome.gnome-commander.enums.xml"; then \
>         test -z "/usr/local/share/glib-2.0/schemas" || /bin/mkdir -p 
> "/usr/local/share/glib-2.0/schemas"; \
>         /usr/bin/install -c -m 644 org.gnome.gnome-commander.gschema.xml 
> org.gnome.gnome-commander.enums.xml "/usr/local/share/glib-2.0/schemas"; \
>         test -n "" || /usr/bin/glib-compile-schemas 
> /usr/local/share/glib-2.0/schemas; \
> fi
> [...]
>
> Best
> Uwe
>
> _______________________________________________
> gcmd-devel mailing list
> gcmd-devel@nongnu.org
> https://lists.nongnu.org/mailman/listinfo/gcmd-devel

--
stefan.czinczoll[at]arcor.de
https://schollsky.jimdofree.com