gawk-diffs
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[gawk-diffs] [SCM] gawk branch, gawk-4.1-stable, updated. gawk-4.1.0-635


From: Arnold Robbins
Subject: [gawk-diffs] [SCM] gawk branch, gawk-4.1-stable, updated. gawk-4.1.0-635-gcfdab8e
Date: Wed, 08 Apr 2015 08:29:03 +0000

This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "gawk".

The branch, gawk-4.1-stable has been updated
       via  cfdab8e9f198ca54a5a253264b14c3784bf07ed6 (commit)
      from  5a85c5b45972f44a03f77bbb1b853d9dfd2ea1cd (commit)

Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.

- Log -----------------------------------------------------------------
http://git.sv.gnu.org/cgit/gawk.git/commit/?id=cfdab8e9f198ca54a5a253264b14c3784bf07ed6

commit cfdab8e9f198ca54a5a253264b14c3784bf07ed6
Author: Arnold D. Robbins <address@hidden>
Date:   Wed Apr 8 11:28:44 2015 +0300

    Updated some translations.

diff --git a/po/fr.po b/po/fr.po
index 8cfe551..966172e 100644
--- a/po/fr.po
+++ b/po/fr.po
@@ -7,12 +7,11 @@
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: gawk 4.1.0b\n"
+"Project-Id-Version: gawk 4.1.1c\n"
 "Report-Msgid-Bugs-To: address@hidden"
-"POT-Creation-Date: 2015-02-26 20:05+0200\n"
-"PO-Revision-Date: 2014-01-16 00:31+0100\n"
-"Last-Translator: Jean-Philippe Guérard <address@hidden"
-"org>\n"
+"POT-Creation-Date: 2015-04-07 17:32+0300\n"
+"PO-Revision-Date: 2015-04-08 00:39+0200\n"
+"Last-Translator: Jean-Philippe Guérard <address@hidden>\n"
 "Language-Team: French <address@hidden>\n"
 "Language: fr\n"
 "MIME-Version: 1.0\n"
@@ -102,415 +101,396 @@ msgstr "« %s » n'est pas un nom de fonction valide"
 msgid "sort comparison function `%s' is not defined"
 msgstr "la fonction de comparaison « %s » du tri n'est pas définie"
 
-#: awkgram.y:226
+#: awkgram.y:225
 #, c-format
 msgid "%s blocks must have an action part"
 msgstr "les blocs %s doivent avoir une partie action"
 
-#: awkgram.y:229
+#: awkgram.y:228
 msgid "each rule must have a pattern or an action part"
 msgstr "chaque règle doit avoir au moins une partie motif ou action"
 
-#: awkgram.y:320 awkgram.y:331
+#: awkgram.y:319 awkgram.y:330
 msgid "old awk does not support multiple `BEGIN' or `END' rules"
 msgstr "l'ancien awk ne permet pas les « BEGIN » ou « END » multiples"
 
-#: awkgram.y:368
+#: awkgram.y:367
 #, c-format
 msgid "`%s' is a built-in function, it cannot be redefined"
 msgstr "« %s » est une fonction interne, elle ne peut être redéfinie"
 
-#: awkgram.y:417
+#: awkgram.y:416
 msgid "regexp constant `//' looks like a C++ comment, but is not"
 msgstr "l'expression rationnelle constante « // » n'est pas un commentaire 
C++"
 
-#: awkgram.y:421
+#: awkgram.y:420
 #, c-format
 msgid "regexp constant `/%s/' looks like a C comment, but is not"
 msgstr "l'expression rationnelle constante « /%s/ » n'est pas un 
commentaire C"
 
-#: awkgram.y:513
+#: awkgram.y:512
 #, c-format
 msgid "duplicate case values in switch body: %s"
 msgstr "le corps du switch comporte des cas répétés : %s"
 
-#: awkgram.y:534
+#: awkgram.y:533
 msgid "duplicate `default' detected in switch body"
 msgstr "plusieurs « default » ont été détectés dans le corps du switch"
 
-#: awkgram.y:794 awkgram.y:3751
+#: awkgram.y:793 awkgram.y:3750
 msgid "`break' is not allowed outside a loop or switch"
 msgstr "« break » est interdit en dehors d'une boucle ou d'un switch"
 
-#: awkgram.y:803 awkgram.y:3743
+#: awkgram.y:802 awkgram.y:3742
 msgid "`continue' is not allowed outside a loop"
 msgstr "« continue » est interdit en dehors d'une boucle ou d'un switch"
 
-#: awkgram.y:813
+#: awkgram.y:812
 #, c-format
 msgid "`next' used in %s action"
 msgstr "« next » est utilisé dans l'action %s"
 
-#: awkgram.y:822
+#: awkgram.y:821
 #, c-format
 msgid "`nextfile' used in %s action"
 msgstr "« nextfile » est utilisé dans l'action %s"
 
-#: awkgram.y:846
+#: awkgram.y:845
 msgid "`return' used outside function context"
 msgstr "« return » est utilisé hors du contexte d'une fonction"
 
-#: awkgram.y:920
+#: awkgram.y:919
 msgid "plain `print' in BEGIN or END rule should probably be `print \"\"'"
-msgstr ""
-"dans BEGIN ou END, un « print » seul devrait sans doute être un « 
print "
-"\"\" »"
+msgstr "dans BEGIN ou END, un « print » seul devrait sans doute être un 
« print \"\" »"
 
-#: awkgram.y:986 awkgram.y:1035
+#: awkgram.y:985 awkgram.y:1034
 msgid "`delete' is not allowed with SYMTAB"
 msgstr "« delete » est interdit sur SYMTAB"
 
-#: awkgram.y:988 awkgram.y:1037
+#: awkgram.y:987 awkgram.y:1036
 msgid "`delete' is not allowed with FUNCTAB"
 msgstr "« delete » est interdit sur FUNCTAB"
 
-#: awkgram.y:1022 awkgram.y:1026
+#: awkgram.y:1021 awkgram.y:1025
 msgid "`delete(array)' is a non-portable tawk extension"
 msgstr "« delete(array) » est une extension non portable de tawk"
 
-#: awkgram.y:1147
+#: awkgram.y:1146
 msgid "multistage two-way pipelines don't work"
 msgstr "impossible d'utiliser des tubes bidirectionnels en série"
 
-#: awkgram.y:1262
+#: awkgram.y:1261
 msgid "regular expression on right of assignment"
 msgstr "expression rationnelle à droite d'une affectation"
 
-#: awkgram.y:1273
+#: awkgram.y:1272
 msgid "regular expression on left of `~' or `!~' operator"
 msgstr "expression rationnelle à gauche d'un opérateur « ~ » ou « !~ 
»"
 
-#: awkgram.y:1289 awkgram.y:1431
+#: awkgram.y:1288 awkgram.y:1430
 msgid "old awk does not support the keyword `in' except after `for'"
 msgstr "l'ancien awk n'autorise le mot-clef « in » qu'après « for »"
 
-#: awkgram.y:1299
+#: awkgram.y:1298
 msgid "regular expression on right of comparison"
 msgstr "expression rationnelle à droite d'une comparaison"
 
-#: awkgram.y:1411
-#, fuzzy, c-format
+#: awkgram.y:1410
+#, c-format
 msgid "non-redirected `getline' invalid inside `%s' rule"
-msgstr "« getline » n'est pas valable dans une règle « %s »"
+msgstr "un « getline » non redirigé n'est pas valable dans une règle « 
%s »"
 
-#: awkgram.y:1414
+#: awkgram.y:1413
 msgid "non-redirected `getline' undefined inside END action"
 msgstr "dans une action END, un « getline » non redirigé n'est pas 
défini"
 
-#: awkgram.y:1433
+#: awkgram.y:1432
 msgid "old awk does not support multidimensional arrays"
 msgstr "l'ancien awk ne dispose pas des tableaux multidimensionnels"
 
-#: awkgram.y:1530
+#: awkgram.y:1529
 msgid "call of `length' without parentheses is not portable"
 msgstr "l'appel de « length » sans parenthèses n'est pas portable"
 
-#: awkgram.y:1596
+#: awkgram.y:1595
 msgid "indirect function calls are a gawk extension"
 msgstr "les appels indirects de fonctions sont une extension gawk"
 
-#: awkgram.y:1609
+#: awkgram.y:1608
 #, c-format
 msgid "can not use special variable `%s' for indirect function call"
-msgstr ""
-"impossible d'utiliser la variable spéciale « %s » pour un appel indirect 
de "
-"fonction"
+msgstr "impossible d'utiliser la variable spéciale « %s » pour un appel 
indirect de fonction"
 
-#: awkgram.y:1635
+#: awkgram.y:1634
 #, c-format
 msgid "attempt to use non-function `%s' in function call"
-msgstr ""
+msgstr "tentative d'appel de « %s » comme fonction"
 
-#: awkgram.y:1699
+#: awkgram.y:1698
 msgid "invalid subscript expression"
 msgstr "expression indice incorrecte"
 
-#: awkgram.y:2045 awkgram.y:2065 gawkapi.c:206 gawkapi.c:224 msg.c:126
+#: awkgram.y:2044 awkgram.y:2064 gawkapi.c:206 gawkapi.c:224 msg.c:126
 msgid "warning: "
 msgstr "avertissement : "
 
-#: awkgram.y:2063 gawkapi.c:192 gawkapi.c:221 msg.c:158
+#: awkgram.y:2062 gawkapi.c:192 gawkapi.c:221 msg.c:158
 msgid "fatal: "
 msgstr "fatal : "
 
-#: awkgram.y:2113
+#: awkgram.y:2112
 msgid "unexpected newline or end of string"
 msgstr "fin de chaîne ou passage à la ligne inattendu"
 
-#: awkgram.y:2392 awkgram.y:2468 awkgram.y:2691 debug.c:523 debug.c:539
+#: awkgram.y:2391 awkgram.y:2467 awkgram.y:2690 debug.c:523 debug.c:539
 #: debug.c:2812 debug.c:5055
 #, c-format
 msgid "can't open source file `%s' for reading (%s)"
 msgstr "impossible d'ouvrir le fichier source « %s » en lecture (%s)"
 
-#: awkgram.y:2393 awkgram.y:2518
+#: awkgram.y:2392 awkgram.y:2517
 #, c-format
 msgid "can't open shared library `%s' for reading (%s)"
 msgstr "impossible d'ouvrir la bibliothèque partagée « %s » en lecture 
(%s)"
 
-#: awkgram.y:2395 awkgram.y:2469 awkgram.y:2519 builtin.c:135 debug.c:5206
+#: awkgram.y:2394 awkgram.y:2468 awkgram.y:2518 builtin.c:135 debug.c:5206
 msgid "reason unknown"
 msgstr "raison inconnue"
 
-#: awkgram.y:2404 awkgram.y:2428
+#: awkgram.y:2403 awkgram.y:2427
 #, c-format
 msgid "can't include `%s' and use it as a program file"
 msgstr "impossible d'inclure « %s » et de l'utiliser comme extension"
 
-#: awkgram.y:2417
+#: awkgram.y:2416
 #, c-format
 msgid "already included source file `%s'"
 msgstr "le fichier source « %s » a déjà été intégré"
 
-#: awkgram.y:2418
+#: awkgram.y:2417
 #, c-format
 msgid "already loaded shared library `%s'"
 msgstr "la bibliothèque partagée « %s » est déjà chargée"
 
-#: awkgram.y:2453
+#: awkgram.y:2452
 msgid "@include is a gawk extension"
 msgstr "@include est une extension gawk"
 
-#: awkgram.y:2459
+#: awkgram.y:2458
 msgid "empty filename after @include"
 msgstr "Le nom de fichier après @include est vide"
 
-#: awkgram.y:2503
+#: awkgram.y:2502
 msgid "@load is a gawk extension"
 msgstr "@load est une extension gawk"
 
-#: awkgram.y:2509
+#: awkgram.y:2508
 msgid "empty filename after @load"
 msgstr "Le nom de fichier après @load est vide"
 
-#: awkgram.y:2643
+#: awkgram.y:2642
 msgid "empty program text on command line"
 msgstr "le programme indiqué en ligne de commande est vide"
 
-#: awkgram.y:2758
+#: awkgram.y:2757
 #, c-format
 msgid "can't read sourcefile `%s' (%s)"
 msgstr "impossible de lire le fichier source « %s » (%s)"
 
-#: awkgram.y:2769
+#: awkgram.y:2768
 #, c-format
 msgid "source file `%s' is empty"
 msgstr "le fichier source « %s » est vide"
 
-#: awkgram.y:2828
+#: awkgram.y:2827
 #, c-format
 msgid "PEBKAC error: invalid character '\\%03o' in source code"
-msgstr ""
+msgstr "erreur bête : caractère incorrect « \\%03o » dans le code 
source"
 
-#: awkgram.y:2959
+#: awkgram.y:2958
 msgid "source file does not end in newline"
 msgstr "le fichier source ne se termine pas par un passage à la ligne"
 
-#: awkgram.y:3062
+#: awkgram.y:3061
 msgid "unterminated regexp ends with `\\' at end of file"
-msgstr ""
-"expression rationnelle non refermée terminée par un « \\ » en fin de 
fichier"
+msgstr "expression rationnelle non refermée terminée par un « \\ » en 
fin de fichier"
 
-#: awkgram.y:3089
+#: awkgram.y:3088
 #, c-format
 msgid "%s: %d: tawk regex modifier `/.../%c' doesn't work in gawk"
-msgstr ""
-"%s : %d : le modificateur d'expressions rationnelles « /.../%c » de 
tawk ne "
-"marche pas dans gawk"
+msgstr "%s : %d : le modificateur d'expressions rationnelles « /.../%c » 
de tawk ne marche pas dans gawk"
 
-#: awkgram.y:3093
+#: awkgram.y:3092
 #, c-format
 msgid "tawk regex modifier `/.../%c' doesn't work in gawk"
-msgstr ""
-"le modificateur d'expressions rationnelles « /.../%c » de tawk ne marche 
pas "
-"dans gawk"
+msgstr "le modificateur d'expressions rationnelles « /.../%c » de tawk ne 
marche pas dans gawk"
 
-#: awkgram.y:3100
+#: awkgram.y:3099
 msgid "unterminated regexp"
 msgstr "expression rationnelle non refermée"
 
-#: awkgram.y:3104
+#: awkgram.y:3103
 msgid "unterminated regexp at end of file"
 msgstr "expression rationnelle non refermée en fin de fichier"
 
-#: awkgram.y:3162
+#: awkgram.y:3161
 msgid "use of `\\ #...' line continuation is not portable"
-msgstr ""
-"l'utilisation de « \\ #... » pour prolonger une ligne n'est pas portable"
+msgstr "l'utilisation de « \\ #... » pour prolonger une ligne n'est pas 
portable"
 
-#: awkgram.y:3178
+#: awkgram.y:3177
 msgid "backslash not last character on line"
 msgstr "la barre oblique inverse n'est pas le dernier caractère de la ligne"
 
-#: awkgram.y:3239
+#: awkgram.y:3238
 msgid "POSIX does not allow operator `**='"
 msgstr "POSIX n'autorise pas l'opérateur « **= »"
 
-#: awkgram.y:3241
+#: awkgram.y:3240
 msgid "old awk does not support operator `**='"
 msgstr "l'ancien awk ne dispose pas de l'opérateur « **= »"
 
-#: awkgram.y:3250
+#: awkgram.y:3249
 msgid "POSIX does not allow operator `**'"
 msgstr "POSIX n'autorise pas l'opérateur « ** »"
 
-#: awkgram.y:3252
+#: awkgram.y:3251
 msgid "old awk does not support operator `**'"
 msgstr "l'ancien awk ne dispose pas de l'opérateur « ** »"
 
-#: awkgram.y:3287
+#: awkgram.y:3286
 msgid "operator `^=' is not supported in old awk"
 msgstr "l'ancien awk ne dispose pas de l'opérateur « ^= »"
 
-#: awkgram.y:3295
+#: awkgram.y:3294
 msgid "operator `^' is not supported in old awk"
 msgstr "l'ancien awk ne dispose pas de l'opérateur « ^ »"
 
-#: awkgram.y:3392 awkgram.y:3410 command.y:1180
+#: awkgram.y:3391 awkgram.y:3409 command.y:1180
 msgid "unterminated string"
 msgstr "chaîne non refermée"
 
-#: awkgram.y:3631
+#: awkgram.y:3630
 #, c-format
 msgid "invalid char '%c' in expression"
 msgstr "caractère incorrect « %c » dans l'expression"
 
-#: awkgram.y:3678
+#: awkgram.y:3677
 #, c-format
 msgid "`%s' is a gawk extension"
 msgstr "« %s » est une extension gawk"
 
-#: awkgram.y:3683
+#: awkgram.y:3682
 #, c-format
 msgid "POSIX does not allow `%s'"
 msgstr "POSIX n'autorise pas « %s »"
 
-#: awkgram.y:3691
+#: awkgram.y:3690
 #, c-format
 msgid "`%s' is not supported in old awk"
 msgstr "l'ancien awk ne dispose pas de « %s »"
 
-#: awkgram.y:3781
+#: awkgram.y:3780
 msgid "`goto' considered harmful!\n"
 msgstr "« goto est jugé dangereux ! » (Edsger W. Dijkstra)\n"
 
-#: awkgram.y:3815
+#: awkgram.y:3814
 #, c-format
 msgid "%d is invalid as number of arguments for %s"
 msgstr "%d n'est pas un nombre d'arguments valide de %s"
 
-#: awkgram.y:3850
+#: awkgram.y:3849
 #, c-format
 msgid "%s: string literal as last arg of substitute has no effect"
-msgstr ""
-"%s : une chaîne littérale en dernier argument d'une substitution est sans "
-"effet"
+msgstr "%s : une chaîne littérale en dernier argument d'une substitution 
est sans effet"
 
-#: awkgram.y:3855
+#: awkgram.y:3854
 #, c-format
 msgid "%s third parameter is not a changeable object"
 msgstr "le 3e paramètre de %s n'est pas un objet modifiable"
 
-#: awkgram.y:3938 awkgram.y:3941
+#: awkgram.y:3937 awkgram.y:3940
 msgid "match: third argument is a gawk extension"
 msgstr "match : le 3e argument est une extension gawk"
 
-#: awkgram.y:3995 awkgram.y:3998
+#: awkgram.y:3994 awkgram.y:3997
 msgid "close: second argument is a gawk extension"
 msgstr "close : le 2e argument est une extension gawk"
 
-#: awkgram.y:4010
+#: awkgram.y:4009
 msgid "use of dcgettext(_\"...\") is incorrect: remove leading underscore"
-msgstr ""
-"utilisation incorrecte de dcgettext(_\"...\") : enlevez le souligné de 
tête"
+msgstr "utilisation incorrecte de dcgettext(_\"...\") : enlevez le souligné 
de tête"
 
-#: awkgram.y:4025
+#: awkgram.y:4024
 msgid "use of dcngettext(_\"...\") is incorrect: remove leading underscore"
-msgstr ""
-"utilisation incorrecte de dcngettext(_\"...\") : enlevez le souligné de 
tête"
+msgstr "utilisation incorrecte de dcngettext(_\"...\") : enlevez le souligné 
de tête"
 
-#: awkgram.y:4044
+#: awkgram.y:4043
 msgid "index: regexp constant as second argument is not allowed"
-msgstr ""
-"index : le second argument ne peut être une expression rationnelle 
constante"
+msgstr "index : le second argument ne peut être une expression rationnelle 
constante"
 
-#: awkgram.y:4097
+#: awkgram.y:4096
 #, c-format
 msgid "function `%s': parameter `%s' shadows global variable"
 msgstr "fonction « %s » : le paramètre « %s » masque la variable 
globale"
 
-#: awkgram.y:4154 debug.c:4041 debug.c:4084 debug.c:5204
+#: awkgram.y:4153 debug.c:4041 debug.c:4084 debug.c:5204
 #, c-format
 msgid "could not open `%s' for writing (%s)"
 msgstr "impossible d'ouvrir « %s » en écriture (%s)"
 
-#: awkgram.y:4155
+#: awkgram.y:4154
 msgid "sending variable list to standard error"
 msgstr "envoi de la liste des variables vers la sortie d'erreur standard"
 
-#: awkgram.y:4163
+#: awkgram.y:4162
 #, c-format
 msgid "%s: close failed (%s)"
 msgstr "%s : échec de la fermeture (%s)"
 
-#: awkgram.y:4188
+#: awkgram.y:4187
 msgid "shadow_funcs() called twice!"
 msgstr "shadows_funcs() a été appelé deux fois !"
 
-#: awkgram.y:4196
+#: awkgram.y:4195
 msgid "there were shadowed variables."
 msgstr "il y avait des variables masquées."
 
-#: awkgram.y:4267
+#: awkgram.y:4266
 #, c-format
 msgid "function name `%s' previously defined"
 msgstr "nom de fonction « %s » déjà défini"
 
-#: awkgram.y:4313
+#: awkgram.y:4312
 #, c-format
 msgid "function `%s': can't use function name as parameter name"
-msgstr ""
-"fonction « %s » : impossible d'utiliser un nom de fonction comme 
paramètre"
+msgstr "fonction « %s » : impossible d'utiliser un nom de fonction comme 
paramètre"
 
-#: awkgram.y:4316
+#: awkgram.y:4315
 #, c-format
 msgid "function `%s': can't use special variable `%s' as a function parameter"
-msgstr ""
-"fonction « %s » : impossible d'utiliser la variable spéciale « %s » 
comme "
-"paramètre d'une fonction"
+msgstr "fonction « %s » : impossible d'utiliser la variable spéciale « 
%s » comme paramètre d'une fonction"
 
-#: awkgram.y:4324
+#: awkgram.y:4323
 #, c-format
 msgid "function `%s': parameter #%d, `%s', duplicates parameter #%d"
-msgstr ""
-"fonction « %s » : paramètre #%d, « %s » est un doublon du 
paramètre #%d"
+msgstr "fonction « %s » : paramètre #%d, « %s » est un doublon du 
paramètre #%d"
 
-#: awkgram.y:4411 awkgram.y:4417
+#: awkgram.y:4410 awkgram.y:4416
 #, c-format
 msgid "function `%s' called but never defined"
 msgstr "fonction « %s » appelée sans être définie"
 
-#: awkgram.y:4421
+#: awkgram.y:4420
 #, c-format
 msgid "function `%s' defined but never called directly"
 msgstr "fonction « %s » définie mais jamais appelée directement"
 
-#: awkgram.y:4453
+#: awkgram.y:4452
 #, c-format
 msgid "regexp constant for parameter #%d yields boolean value"
 msgstr "le paramètre #%d, une expr. rationnelle constante, fournit un 
booléen"
 
-#: awkgram.y:4468
+#: awkgram.y:4467
 #, c-format
 msgid ""
 "function `%s' called with space between name and `(',\n"
@@ -519,24 +499,21 @@ msgstr ""
 "fonction « %s » appelée avec un espace entre son nom\n"
 "et « ( », ou utilisée comme variable ou tableau"
 
-#: awkgram.y:4674
+#: awkgram.y:4673
 msgid "division by zero attempted"
 msgstr "tentative de division par zéro"
 
-#: awkgram.y:4683
+#: awkgram.y:4682
 #, c-format
 msgid "division by zero attempted in `%%'"
 msgstr "tentative de division par zéro dans « %% »"
 
 # gawk 'BEGIN { $1++ = 1 }'
-#: awkgram.y:5003
-msgid ""
-"cannot assign a value to the result of a field post-increment expression"
-msgstr ""
-"impossible d'assigner une valeur au résultat de la post-incrémentation d'un 
"
-"champ"
+#: awkgram.y:5002
+msgid "cannot assign a value to the result of a field post-increment 
expression"
+msgstr "impossible d'assigner une valeur au résultat de la 
post-incrémentation d'un champ"
 
-#: awkgram.y:5006
+#: awkgram.y:5005
 #, c-format
 msgid "invalid target of assignment (opcode %s)"
 msgstr "cible de l'assignement incorrecte (opcode %s)"
@@ -562,22 +539,17 @@ msgstr "exp : l'argument %g est hors limite"
 #: builtin.c:229
 #, c-format
 msgid "fflush: cannot flush: pipe `%s' opened for reading, not writing"
-msgstr ""
-"fflush : vidage impossible : le tube « %s » est ouvert en lecture et 
non en "
-"écriture"
+msgstr "fflush : vidage impossible : le tube « %s » est ouvert en 
lecture et non en écriture"
 
 #: builtin.c:232
 #, c-format
 msgid "fflush: cannot flush: file `%s' opened for reading, not writing"
-msgstr ""
-"fflush : vidage impossible : fichier « %s » ouvert en lecture, pas en "
-"écriture"
+msgstr "fflush : vidage impossible : fichier « %s » ouvert en lecture, 
pas en écriture"
 
 #: builtin.c:244
 #, c-format
 msgid "fflush: `%s' is not an open file, pipe or co-process"
-msgstr ""
-"fflush : « %s » n'est ni un fichier ouvert, ni un tube, ni un 
co-processus"
+msgstr "fflush : « %s » n'est ni un fichier ouvert, ni un tube, ni un 
co-processus"
 
 #: builtin.c:351
 msgid "index: received non-string first argument"
@@ -614,8 +586,7 @@ msgstr "log : l'argument est négatif %g"
 
 #: builtin.c:755 builtin.c:760 builtin.c:911
 msgid "fatal: must use `count$' on all formats or none"
-msgstr ""
-"fatal : « numéro$ » doit être utilisé pour toutes les formats ou pour 
aucun"
+msgstr "fatal : « numéro$ » doit être utilisé pour toutes les formats 
ou pour aucun"
 
 #: builtin.c:830
 #, c-format
@@ -643,8 +614,7 @@ msgstr "fatal : le numéro d'argument de « $ » doit 
être > 0"
 #: builtin.c:898
 #, c-format
 msgid "fatal: arg count %ld greater than total number of supplied arguments"
-msgstr ""
-"fatal : le numéro d'argument %ld est > au nombre total d'arguments fournis"
+msgstr "fatal : le numéro d'argument %ld est > au nombre total d'arguments 
fournis"
 
 #: builtin.c:902
 msgid "fatal: `$' not permitted after period in format"
@@ -652,8 +622,7 @@ msgstr "fatal : dans un format, « $ » ne doit pas 
suivre un point"
 
 #: builtin.c:921
 msgid "fatal: no `$' supplied for positional field width or precision"
-msgstr ""
-"fatal : aucun « $ » fourni pour la taille ou la précision du champ 
positionné"
+msgstr "fatal : aucun « $ » fourni pour la taille ou la précision du 
champ positionné"
 
 #: builtin.c:991
 msgid "`l' is meaningless in awk formats; ignored"
@@ -680,14 +649,14 @@ msgid "fatal: `h' is not permitted in POSIX awk formats"
 msgstr "fatal : « h » est interdit dans un format awk POSIX"
 
 #: builtin.c:1055
-#, fuzzy, c-format
+#, c-format
 msgid "[s]printf: value %g is too big for %%c format"
-msgstr "[s]printf : valeur %g hors limite pour le format « %%%c »"
+msgstr "[s]printf : valeur %g trop grande pour le format « %%c »"
 
 #: builtin.c:1068
-#, fuzzy, c-format
+#, c-format
 msgid "[s]printf: value %g is not a valid wide character"
-msgstr "[s]printf : valeur %g hors limite pour le format « %%%c »"
+msgstr "[s]printf : %g n'est pas un caractère large valable"
 
 #: builtin.c:1454
 #, c-format
@@ -773,17 +742,13 @@ msgstr "substr : l'index de début %g est au-delà de la 
fin de la chaîne"
 
 #: builtin.c:1820
 #, c-format
-msgid ""
-"substr: length %g at start index %g exceeds length of first argument (%lu)"
-msgstr ""
-"substr : la longueur %g à partir de %g dépasse la fin du 1er argument 
(%lu)"
+msgid "substr: length %g at start index %g exceeds length of first argument 
(%lu)"
+msgstr "substr : la longueur %g à partir de %g dépasse la fin du 1er 
argument (%lu)"
 
 # Exemple : gawk --lint 'BEGIN { PROCINFO["strftime"]=123 ;  print strftime() 
}'
 #: builtin.c:1890
 msgid "strftime: format value in PROCINFO[\"strftime\"] has numeric type"
-msgstr ""
-"strftime : la valeur de formatage PROCINFO[\"strftime\"] est de type "
-"numérique"
+msgstr "strftime : la valeur de formatage PROCINFO[\"strftime\"] est de type 
numérique"
 
 #: builtin.c:1913
 msgid "strftime: received non-numeric second argument"
@@ -807,8 +772,7 @@ msgstr "mktime : l'argument n'est pas une chaîne"
 
 #: builtin.c:2014
 msgid "mktime: at least one of the values is out of the default range"
-msgstr ""
-"mktime : au moins l'une des valeurs est en dehors de la plage par défaut"
+msgstr "mktime : au moins l'une des valeurs est en dehors de la plage par 
défaut"
 
 #: builtin.c:2049
 msgid "'system' function not allowed in sandbox mode"
@@ -856,124 +820,128 @@ msgid "match: third argument is not an array"
 msgstr "match : le 3e argument n'est pas un tableau"
 
 #: builtin.c:2705
-#, fuzzy, c-format
+#, c-format
 msgid "gensub: third argument `%.*s' treated as 1"
-msgstr "gensub : le 3e argument vaut 0, il sera traité comme un 1"
+msgstr "gensub : le 3e argument « %.*s » sera traité comme un 1"
 
 #: builtin.c:2720
-#, fuzzy, c-format
+#, c-format
 msgid "gensub: third argument %g treated as 1"
-msgstr "gensub : le 3e argument vaut 0, il sera traité comme un 1"
+msgstr "gensub : le 3e argument %g sera traité comme un 1"
 
-#: builtin.c:3020
+#: builtin.c:3018
+#, c-format
+msgid "%s: can be called indirectly only with two arguments"
+msgstr "%s : un appel indirect nécessite deux arguments"
+
+#: builtin.c:3108
+#, c-format
+msgid "indirect call to %s requires at least two arguments"
+msgstr "un appel indirect à %s demande au moins 2 arguments"
+
+#: builtin.c:3160
 msgid "lshift: received non-numeric first argument"
 msgstr "lshift : le premier argument n'est pas numérique"
 
-#: builtin.c:3022
+#: builtin.c:3162
 msgid "lshift: received non-numeric second argument"
 msgstr "lshift : le second argument reçu n'est pas numérique"
 
-#: builtin.c:3028
+#: builtin.c:3168
 #, c-format
 msgid "lshift(%f, %f): negative values will give strange results"
-msgstr ""
-"lshift(%f, %f) : les valeurs négatives donnent des résultats inattendus"
+msgstr "lshift(%f, %f) : les valeurs négatives donnent des résultats 
inattendus"
 
-#: builtin.c:3030
+#: builtin.c:3170
 #, c-format
 msgid "lshift(%f, %f): fractional values will be truncated"
 msgstr "lshift(%f, %f) : les valeurs non entières seront tronquées"
 
-#: builtin.c:3032
+#: builtin.c:3172
 #, c-format
 msgid "lshift(%f, %f): too large shift value will give strange results"
 msgstr "lshift(%f, %f) : un décalage trop grand donne des résultats 
inattendus"
 
-#: builtin.c:3057
+#: builtin.c:3197
 msgid "rshift: received non-numeric first argument"
 msgstr "rshift : le premier argument n'est pas numérique"
 
-#: builtin.c:3059
+#: builtin.c:3199
 msgid "rshift: received non-numeric second argument"
 msgstr "rshift : le second argument reçu n'est pas numérique"
 
-#: builtin.c:3065
+#: builtin.c:3205
 #, c-format
 msgid "rshift(%f, %f): negative values will give strange results"
-msgstr ""
-"rshift(%f, %f) : les valeurs négatives donneront des résultats inattendus"
+msgstr "rshift(%f, %f) : les valeurs négatives donneront des résultats 
inattendus"
 
-#: builtin.c:3067
+#: builtin.c:3207
 #, c-format
 msgid "rshift(%f, %f): fractional values will be truncated"
 msgstr "rshift(%f, %f) : les valeurs non entières seront tronquées"
 
-#: builtin.c:3069
+#: builtin.c:3209
 #, c-format
 msgid "rshift(%f, %f): too large shift value will give strange results"
-msgstr ""
-"rshift(%f, %f) : un décalage trop grand donnera des résultats inattendus"
+msgstr "rshift(%f, %f) : un décalage trop grand donnera des résultats 
inattendus"
 
-#: builtin.c:3094 mpfr.c:988
+#: builtin.c:3234 mpfr.c:988
 msgid "and: called with less than two arguments"
 msgstr "and : appelé avec moins de 2 arguments"
 
-#: builtin.c:3099
+#: builtin.c:3239
 #, c-format
 msgid "and: argument %d is non-numeric"
 msgstr "and : l'argument %d n'est pas numérique"
 
-#: builtin.c:3103
+#: builtin.c:3243
 #, c-format
 msgid "and: argument %d negative value %g will give strange results"
-msgstr ""
-"and : l'argument %d est négatif (%g) ce qui aura des résultats inattendus"
+msgstr "and : l'argument %d est négatif (%g) ce qui aura des résultats 
inattendus"
 
-#: builtin.c:3126 mpfr.c:1020
+#: builtin.c:3266 mpfr.c:1020
 msgid "or: called with less than two arguments"
 msgstr "or : appelé avec moins de 2 arguments"
 
-#: builtin.c:3131
+#: builtin.c:3271
 #, c-format
 msgid "or: argument %d is non-numeric"
 msgstr "or : l'argument %d n'est pas numérique"
 
-#: builtin.c:3135
+#: builtin.c:3275
 #, c-format
 msgid "or: argument %d negative value %g will give strange results"
-msgstr ""
-"or : l'argument %d est négatif (%g) ce qui aura des résultats inattendus"
+msgstr "or : l'argument %d est négatif (%g) ce qui aura des résultats 
inattendus"
 
-#: builtin.c:3157 mpfr.c:1051
+#: builtin.c:3297 mpfr.c:1051
 msgid "xor: called with less than two arguments"
 msgstr "xor : appelé avec moins de 2 arguments"
 
-#: builtin.c:3163
+#: builtin.c:3303
 #, c-format
 msgid "xor: argument %d is non-numeric"
 msgstr "xor : l'argument %d n'est pas numérique"
 
-#: builtin.c:3167
+#: builtin.c:3307
 #, c-format
 msgid "xor: argument %d negative value %g will give strange results"
-msgstr ""
-"xor : l'argument %d est négatif (%g) ce qui aura des résultats inattendus"
+msgstr "xor : l'argument %d est négatif (%g) ce qui aura des résultats 
inattendus"
 
-#: builtin.c:3192 mpfr.c:807
+#: builtin.c:3332 mpfr.c:807
 msgid "compl: received non-numeric argument"
 msgstr "compl : l'argument n'est pas numérique"
 
-#: builtin.c:3198
+#: builtin.c:3338
 #, c-format
 msgid "compl(%f): negative value will give strange results"
 msgstr "compl(%f) : les valeurs négatives donneront des résultats 
inattendus"
 
-#: builtin.c:3200
+#: builtin.c:3340
 #, c-format
 msgid "compl(%f): fractional value will be truncated"
 msgstr "compl(%f) : les valeurs non entières seront tronquées"
 
-#: builtin.c:3369
+#: builtin.c:3509
 #, c-format
 msgid "dcgettext: `%s' is not a valid locale category"
 msgstr "dcgettext : « %s » n'est pas dans un catégorie valide de la 
locale"
@@ -1005,8 +973,7 @@ msgstr "sauve « %s » : commande interdite."
 
 #: command.y:339
 msgid "Can't use command `commands' for breakpoint/watchpoint commands"
-msgstr ""
-"Impossible d'utiliser « commands » pour des points d'arrêt ou de 
surveillance"
+msgstr "Impossible d'utiliser « commands » pour des points d'arrêt ou de 
surveillance"
 
 #: command.y:341
 msgid "no breakpoint/watchpoint has been set yet"
@@ -1019,8 +986,7 @@ msgstr "numéro de point d'arrêt ou de surveillance 
incorrect"
 #: command.y:348
 #, c-format
 msgid "Type commands for when %s %d is hit, one per line.\n"
-msgstr ""
-"Entrez les commandes exécutées lors de l'appui de %s %d, une par ligne.\n"
+msgstr "Entrez les commandes exécutées lors de l'appui de %s %d, une par 
ligne.\n"
 
 #: command.y:350
 #, c-format
@@ -1081,36 +1047,24 @@ msgid "non-zero integer value"
 msgstr "valeur entière non nulle"
 
 #: command.y:817
-msgid ""
-"backtrace [N] - print trace of all or N innermost (outermost if N < 0) "
-"frames."
-msgstr ""
-"backtrace [N] - affiche la trace de tout ou des N dernières trames (du 
début "
-"si N < 0)."
+msgid "backtrace [N] - print trace of all or N innermost (outermost if N < 0) 
frames."
+msgstr "backtrace [N] - affiche la trace de tout ou des N dernières trames 
(du début si N < 0)."
 
 #: command.y:819
-msgid ""
-"break [[filename:]N|function] - set breakpoint at the specified location."
-msgstr ""
-"break [[fichier:]N|fonction] - définit un point d'arrêt à l'endroit 
indiqué."
+msgid "break [[filename:]N|function] - set breakpoint at the specified 
location."
+msgstr "break [[fichier:]N|fonction] - définit un point d'arrêt à l'endroit 
indiqué."
 
 #: command.y:821
 msgid "clear [[filename:]N|function] - delete breakpoints previously set."
 msgstr "clear [[fichier:]N|fonction] - détruit un point d'arrêt existant."
 
 #: command.y:823
-msgid ""
-"commands [num] - starts a list of commands to be executed at a "
-"breakpoint(watchpoint) hit."
-msgstr ""
-"commands [no] - débute une liste de commande à lancer aux points d'arrêt 
ou "
-"de surveillance."
+msgid "commands [num] - starts a list of commands to be executed at a 
breakpoint(watchpoint) hit."
+msgstr "commands [no] - débute une liste de commande à lancer aux points 
d'arrêt ou de surveillance."
 
 #: command.y:825
 msgid "condition num [expr] - set or clear breakpoint or watchpoint condition."
-msgstr ""
-"condition no [expr] - défini ou détruit une condition d'arrêt ou de "
-"surveillance."
+msgstr "condition no [expr] - défini ou détruit une condition d'arrêt ou de 
surveillance."
 
 #: command.y:827
 msgid "continue [COUNT] - continue program being debugged."
@@ -1122,8 +1076,7 @@ msgstr "delete [points d'arrêt] [plage] - détruit les 
points d'arrêt indiqué
 
 #: command.y:831
 msgid "disable [breakpoints] [range] - disable specified breakpoints."
-msgstr ""
-"disable [points d'arrêt] [plage] - désactive les points d'arrêt indiqués."
+msgstr "disable [points d'arrêt] [plage] - désactive les points d'arrêt 
indiqués."
 
 #: command.y:833
 msgid "display [var] - print value of variable each time the program stops."
@@ -1135,13 +1088,11 @@ msgstr "down [N] - descend de N trames dans la pile."
 
 #: command.y:837
 msgid "dump [filename] - dump instructions to file or stdout."
-msgstr ""
-"dump [fichier] - vide les instructions vers la sortie standard ou un fichier."
+msgstr "dump [fichier] - vide les instructions vers la sortie standard ou un 
fichier."
 
 #: command.y:839
 msgid "enable [once|del] [breakpoints] [range] - enable specified breakpoints."
-msgstr ""
-"enable [once|del] [points d'arrêt] [plage] - active les points d'arrêt."
+msgstr "enable [once|del] [points d'arrêt] [plage] - active les points 
d'arrêt."
 
 #: command.y:841
 msgid "end - end a list of commands or awk statements."
@@ -1161,35 +1112,27 @@ msgstr "frame [N] - sélectionne et affiche la trame N 
de la pile."
 
 #: command.y:849
 msgid "help [command] - print list of commands or explanation of command."
-msgstr ""
-"help [commande] - affiche la liste des commandes ou explique la commande."
+msgstr "help [commande] - affiche la liste des commandes ou explique la 
commande."
 
 #: command.y:851
 msgid "ignore N COUNT - set ignore-count of breakpoint number N to COUNT."
 msgstr "ignore N NB - ignore les NB prochaines occurrences du point d'arrêt 
N."
 
 #: command.y:853
-msgid ""
-"info topic - source|sources|variables|functions|break|frame|args|locals|"
-"display|watch."
-msgstr ""
-"info sujet - source|sources|variables|functions|break|frame|args|locals|"
-"display|watch."
+msgid "info topic - 
source|sources|variables|functions|break|frame|args|locals|display|watch."
+msgstr "info sujet - 
source|sources|variables|functions|break|frame|args|locals|display|watch."
 
 #: command.y:855
 msgid "list [-|+|[filename:]lineno|function|range] - list specified line(s)."
-msgstr ""
-"list [-|+|[fichier:]no_ligne|fonction|plage] - affiche les lignes indiquées."
+msgstr "list [-|+|[fichier:]no_ligne|fonction|plage] - affiche les lignes 
indiquées."
 
 #: command.y:857
 msgid "next [COUNT] - step program, proceeding through subroutine calls."
 msgstr "next [NB] - avance ligne par ligne, sans détailler les sous-routines."
 
 #: command.y:859
-msgid ""
-"nexti [COUNT] - step one instruction, but proceed through subroutine calls."
-msgstr ""
-"nexti [NB] - avance d'une instruction, sans détailler les sous-routines."
+msgid "nexti [COUNT] - step one instruction, but proceed through subroutine 
calls."
+msgstr "nexti [NB] - avance d'une instruction, sans détailler les 
sous-routines."
 
 #: command.y:861
 msgid "option [name[=value]] - set or display debugger option(s)."
@@ -1217,19 +1160,15 @@ msgstr "run - démarre et redémarre l'exécution du 
programme."
 
 #: command.y:874
 msgid "save filename - save commands from the session to file."
-msgstr ""
-"save fichier - enregistre les commandes de la sessions dans un fichier."
+msgstr "save fichier - enregistre les commandes de la sessions dans un 
fichier."
 
 #: command.y:877
 msgid "set var = value - assign value to a scalar variable."
 msgstr "set var = valeur - assigne une valeur à une variable scalaire."
 
 #: command.y:879
-msgid ""
-"silent - suspends usual message when stopped at a breakpoint/watchpoint."
-msgstr ""
-"silent - suspend les messages habituels lors des points d'arrêt et de "
-"surveillance."
+msgid "silent - suspends usual message when stopped at a 
breakpoint/watchpoint."
+msgstr "silent - suspend les messages habituels lors des points d'arrêt et de 
surveillance."
 
 #: command.y:881
 msgid "source file - execute commands from file."
@@ -1253,17 +1192,11 @@ msgstr "trace on|off - affiche les instructions avant 
de les exécuter."
 
 #: command.y:891
 msgid "undisplay [N] - remove variable(s) from automatic display list."
-msgstr ""
-"undisplay [N] - retire la ou les variables de la liste d'affichage "
-"automatique."
+msgstr "undisplay [N] - retire la ou les variables de la liste d'affichage 
automatique."
 
 #: command.y:893
-msgid ""
-"until [[filename:]N|function] - execute until program reaches a different "
-"line or line N within current frame."
-msgstr ""
-"until [[fichier:]N|fonction] - exécution jusqu'à dépasser la ligne courant 
"
-"ou la ligne N, dans la trame actuelle."
+msgid "until [[filename:]N|function] - execute until program reaches a 
different line or line N within current frame."
+msgstr "until [[fichier:]N|fonction] - exécution jusqu'à dépasser la ligne 
courant ou la ligne N, dans la trame actuelle."
 
 #: command.y:895
 msgid "unwatch [N] - remove variable(s) from watch list."
@@ -1278,13 +1211,8 @@ msgid "watch var - set a watchpoint for a variable."
 msgstr "watch var - définit un point de surveillance pour une variable."
 
 #: command.y:901
-#, fuzzy
-msgid ""
-"where [N] - (same as backtrace) print trace of all or N innermost (outermost "
-"if N < 0) frames."
-msgstr ""
-"backtrace [N] - affiche la trace de tout ou des N dernières trames (du 
début "
-"si N < 0)."
+msgid "where [N] - (same as backtrace) print trace of all or N innermost 
(outermost if N < 0) frames."
+msgstr "where [N] - (identique à backtrace) affiche la trace de tout ou des N 
dernières trames (du début si N < 0)."
 
 #: command.y:1013 debug.c:401 msg.c:135
 #, c-format
@@ -1342,8 +1270,7 @@ msgstr "affiche ou définit l'invite du débogueur."
 
 #: debug.c:260
 msgid "(un)set or show saving of command history (value=on|off)."
-msgstr ""
-"affiche ou (dés)active l'enregistrement de l'historique (valeur=on|off)."
+msgstr "affiche ou (dés)active l'enregistrement de l'historique 
(valeur=on|off)."
 
 #: debug.c:262
 msgid "(un)set or show saving of options (value=on|off)."
@@ -1379,8 +1306,7 @@ msgstr "impossible de trouver le fichier source nommé 
« %s » (%s)"
 #: debug.c:529
 #, c-format
 msgid "WARNING: source file `%s' modified since program compilation.\n"
-msgstr ""
-"ATTENTION : fichier source « %s » modifié après compilation du 
programme.\n"
+msgstr "ATTENTION : fichier source « %s » modifié après compilation du 
programme.\n"
 
 #: debug.c:551
 #, c-format
@@ -1577,8 +1503,7 @@ msgstr "tentative d'utiliser un scalaire comme tableau"
 #: debug.c:1856
 #, c-format
 msgid "Watchpoint %d deleted because parameter is out of scope.\n"
-msgstr ""
-"Point de surveillance %d détruit, car son paramètre est hors contexte.\n"
+msgstr "Point de surveillance %d détruit, car son paramètre est hors 
contexte.\n"
 
 #: debug.c:1867
 #, c-format
@@ -1612,8 +1537,7 @@ msgstr "Numéro de trame incorrect"
 #: debug.c:2200
 #, c-format
 msgid "Note: breakpoint %d (enabled, ignore next %ld hits), also set at %s:%d"
-msgstr ""
-"Note : point d'arrêt %d (activé, ignore %ld occurrences) déjà défini à 
%s:%d"
+msgstr "Note : point d'arrêt %d (activé, ignore %ld occurrences) déjà 
défini à %s:%d"
 
 #: debug.c:2207
 #, c-format
@@ -1623,9 +1547,7 @@ msgstr "Note : point d'arrêt %d (activé) déjà défini 
à %s:%d"
 #: debug.c:2214
 #, c-format
 msgid "Note: breakpoint %d (disabled, ignore next %ld hits), also set at %s:%d"
-msgstr ""
-"Note : point d'arrêt %d (désactivé, ignore %ld occurrences) déjà défini 
à %s:"
-"%d"
+msgstr "Note : point d'arrêt %d (désactivé, ignore %ld occurrences) déjà 
défini à %s:%d"
 
 #: debug.c:2221
 #, c-format
@@ -1665,9 +1587,7 @@ msgstr "Impossible de définir un point d'arrêt dans la 
fonction « %s »\n"
 #: debug.c:2403
 #, c-format
 msgid "breakpoint %d set at file `%s', line %d is unconditional\n"
-msgstr ""
-"le point d'arrêt %d défini sur le fichier « %s », ligne %d est "
-"inconditionnel\n"
+msgstr "le point d'arrêt %d défini sur le fichier « %s », ligne %d est 
inconditionnel\n"
 
 #: debug.c:2508 debug.c:2530
 #, c-format
@@ -1709,8 +1629,7 @@ msgstr "S'arrêtera à la prochaine occurrence du point 
d'arrêt %d.\n"
 #: debug.c:2783
 #, c-format
 msgid "Can only debug programs provided with the `-f' option.\n"
-msgstr ""
-"Seuls les programmes fournis via l'option « -f » peuvent être 
débogués.\n"
+msgstr "Seuls les programmes fournis via l'option « -f » peuvent être 
débogués.\n"
 
 #: debug.c:2908
 #, c-format
@@ -1874,14 +1793,12 @@ msgid "unfinished \\ escape"
 msgstr "échappement \\ non terminé"
 
 #: dfa.c:1474
-#, fuzzy
 msgid "invalid content of \\{\\}"
-msgstr "Contenu de \\{\\} incorrect"
+msgstr "contenu de \\{\\} incorrect"
 
 #: dfa.c:1477
-#, fuzzy
 msgid "regular expression too big"
-msgstr "Expression rationnelle trop grande"
+msgstr "expression rationnelle trop grande"
 
 #: dfa.c:1912
 msgid "unbalanced ("
@@ -2013,25 +1930,18 @@ msgstr "load_ext : impossible d'ouvrir la bibliothèque 
« %s » (%s)\n"
 
 #: ext.c:80
 #, c-format
-msgid ""
-"load_ext: library `%s': does not define `plugin_is_GPL_compatible' (%s)\n"
-msgstr ""
-"load_ext : bibliothèque « %s » : ne définit pas "
-"« plugin_is_GPL_compatible » (%s)\n"
+msgid "load_ext: library `%s': does not define `plugin_is_GPL_compatible' 
(%s)\n"
+msgstr "load_ext : bibliothèque « %s » : ne définit pas « 
plugin_is_GPL_compatible » (%s)\n"
 
 #: ext.c:86
 #, c-format
 msgid "load_ext: library `%s': cannot call function `%s' (%s)\n"
-msgstr ""
-"load_ext : bibliothèque « %s » : impossible d'appeler la fonction "
-"« %s » (%s)\n"
+msgstr "load_ext : bibliothèque « %s » : impossible d'appeler la 
fonction « %s » (%s)\n"
 
 #: ext.c:90
 #, c-format
 msgid "load_ext: library `%s' initialization routine `%s' failed\n"
-msgstr ""
-"load_ext : bibliothèque « %s » : échec de la routine d'initialisation 
« %s "
-"»\n"
+msgstr "load_ext : bibliothèque « %s » : échec de la routine 
d'initialisation « %s »\n"
 
 #: ext.c:150
 msgid "`extension' is a gawk extension"
@@ -2048,18 +1958,13 @@ msgstr "extension : impossible d'ouvrir la 
bibliothèque « %s » (%s)"
 
 #: ext.c:162
 #, c-format
-msgid ""
-"extension: library `%s': does not define `plugin_is_GPL_compatible' (%s)"
-msgstr ""
-"extension : bibliothèque « %s » : ne définit pas "
-"« plugin_is_GPL_compatible » (%s)"
+msgid "extension: library `%s': does not define `plugin_is_GPL_compatible' 
(%s)"
+msgstr "extension : bibliothèque « %s » : ne définit pas « 
plugin_is_GPL_compatible » (%s)"
 
 #: ext.c:166
 #, c-format
 msgid "extension: library `%s': cannot call function `%s' (%s)"
-msgstr ""
-"extension : bibliothèque « %s » : impossible d'appeler la fonction "
-"« %s » (%s)"
+msgstr "extension : bibliothèque « %s » : impossible d'appeler la 
fonction « %s » (%s)"
 
 #: ext.c:197
 msgid "make_builtin: missing function name"
@@ -2083,9 +1988,7 @@ msgstr "make_builtin : nom de la fonction « %s » 
déjà défini"
 #: ext.c:222
 #, c-format
 msgid "make_builtin: can't use gawk built-in `%s' as function name"
-msgstr ""
-"make_builtin : impossible d'utiliser la fonction gawk « %s » comme nom 
de "
-"fonction"
+msgstr "make_builtin : impossible d'utiliser la fonction gawk « %s » 
comme nom de fonction"
 
 #: ext.c:225 ext.c:280
 #, c-format
@@ -2119,9 +2022,7 @@ msgstr "extension : nom de la fonction « %s » déjà 
défini"
 #: ext.c:277
 #, c-format
 msgid "extension: can't use gawk built-in `%s' as function name"
-msgstr ""
-"extension : impossible d'utiliser la fonction interne gawk « %s » comme 
nom "
-"de fonction"
+msgstr "extension : impossible d'utiliser la fonction interne gawk « %s » 
comme nom de fonction"
 
 #: ext.c:351
 #, c-format
@@ -2136,16 +2037,12 @@ msgstr "fonction « %s » : argument #%d manquant"
 #: ext.c:371
 #, c-format
 msgid "function `%s': argument #%d: attempt to use scalar as an array"
-msgstr ""
-"fonction « %s » : argument #%d : tentative d'utilisation d'un scalaire 
comme "
-"tableau"
+msgstr "fonction « %s » : argument #%d : tentative d'utilisation d'un 
scalaire comme tableau"
 
 #: ext.c:375
 #, c-format
 msgid "function `%s': argument #%d: attempt to use array as a scalar"
-msgstr ""
-"fonction « %s » : argument #%d : tentative d'utiliser un tableau comme "
-"scalaire"
+msgstr "fonction « %s » : argument #%d : tentative d'utiliser un tableau 
comme scalaire"
 
 #: ext.c:389
 msgid "dynamic loading of library not supported"
@@ -2298,15 +2195,12 @@ msgstr "inplace_begin : 2 arguments attendu, appelé 
avec %d"
 
 #: extension/inplace.c:136
 msgid "inplace_begin: cannot retrieve 1st argument as a string filename"
-msgstr ""
-"inplace_begin : impossible de récupérer le 1er argument comme nom de 
fichier"
+msgstr "inplace_begin : impossible de récupérer le 1er argument comme nom 
de fichier"
 
 #: extension/inplace.c:144
 #, c-format
 msgid "inplace_begin: disabling in-place editing for invalid FILENAME `%s'"
-msgstr ""
-"inplace_begin : modification sur place annulée pour le fichier incorrect "
-"« %s »"
+msgstr "inplace_begin : modification sur place annulée pour le fichier 
incorrect « %s »"
 
 #: extension/inplace.c:151
 #, c-format
@@ -2345,8 +2239,7 @@ msgstr "inplace_begin : échec de close(%d) (%s)"
 
 #: extension/inplace.c:213
 msgid "inplace_end: cannot retrieve 1st argument as a string filename"
-msgstr ""
-"inplace_end : impossible de récupérer le 1er argument comme nom de fichier"
+msgstr "inplace_end : impossible de récupérer le 1er argument comme nom de 
fichier"
 
 #: extension/inplace.c:220
 msgid "inplace_end: in-place editing not active"
@@ -2416,7 +2309,7 @@ msgstr "readfile : appelé sans argument"
 
 #: extension/revoutput.c:125
 msgid "revoutput: could not initialize REVOUT variable"
-msgstr ""
+msgstr "revoutput : impossible d'initialiser la variable REVOUT"
 
 #: extension/rwarray.c:124 extension/rwarray0.c:109
 msgid "writea: called with too many arguments"
@@ -2512,13 +2405,11 @@ msgstr "split : impossible d'utiliser le même tableau 
comme 2e et 4e argument"
 
 #: field.c:985
 msgid "split: cannot use a subarray of second arg for fourth arg"
-msgstr ""
-"split : impossible d'utiliser un sous-tableau du 2e argument en 4e argument"
+msgstr "split : impossible d'utiliser un sous-tableau du 2e argument en 4e 
argument"
 
 #: field.c:988
 msgid "split: cannot use a subarray of fourth arg for second arg"
-msgstr ""
-"split : impossible d'utiliser un sous-tableau du 4e argument en 2e argument"
+msgstr "split : impossible d'utiliser un sous-tableau du 4e argument en 2e 
argument"
 
 #: field.c:1019
 msgid "split: null string for third arg is a gawk extension"
@@ -2538,20 +2429,15 @@ msgstr "patsplit : le 3e argument n'est pas un tableau"
 
 #: field.c:1074
 msgid "patsplit: cannot use the same array for second and fourth args"
-msgstr ""
-"patsplit : impossible d'utiliser le même tableau comme 2e et 4e argument"
+msgstr "patsplit : impossible d'utiliser le même tableau comme 2e et 4e 
argument"
 
 #: field.c:1079
 msgid "patsplit: cannot use a subarray of second arg for fourth arg"
-msgstr ""
-"patsplit : impossible d'utiliser un sous-tableau du 2e argument en 4e "
-"argument"
+msgstr "patsplit : impossible d'utiliser un sous-tableau du 2e argument en 4e 
argument"
 
 #: field.c:1082
 msgid "patsplit: cannot use a subarray of fourth arg for second arg"
-msgstr ""
-"patsplit : impossible d'utiliser un sous-tableau du 4e argument en 2e "
-"argument"
+msgstr "patsplit : impossible d'utiliser un sous-tableau du 4e argument en 2e 
argument"
 
 #: field.c:1120
 msgid "`FIELDWIDTHS' is a gawk extension"
@@ -2568,8 +2454,7 @@ msgstr "utiliser une chaîne vide pour « FS » est une 
extension gawk"
 
 #: field.c:1261
 msgid "old awk does not support regexps as value of `FS'"
-msgstr ""
-"l'ancien awk n'accepte pas les expr. rationnelles comme valeur de « FS »"
+msgstr "l'ancien awk n'accepte pas les expr. rationnelles comme valeur de « 
FS »"
 
 #: field.c:1380
 msgid "`FPAT' is a gawk extension"
@@ -2692,9 +2577,7 @@ msgstr "l'expression dans la redirection « %s » donne 
une chaîne nulle"
 #: io.c:794
 #, c-format
 msgid "filename `%s' for `%s' redirection may be result of logical expression"
-msgstr ""
-"le fichier « %s » de la redirection « %s » pourrait être le 
résultat d'une "
-"expression booléenne"
+msgstr "le fichier « %s » de la redirection « %s » pourrait être le 
résultat d'une expression booléenne"
 
 #: io.c:842
 #, c-format
@@ -2714,8 +2597,7 @@ msgstr "impossible d'ouvrir le tube « %s » en entrée 
(%s)"
 #: io.c:937
 #, c-format
 msgid "can't open two way pipe `%s' for input/output (%s)"
-msgstr ""
-"impossible d'ouvrir un tube bidirectionnel « %s » en entrées-sorties 
(%s)"
+msgstr "impossible d'ouvrir un tube bidirectionnel « %s » en 
entrées-sorties (%s)"
 
 #: io.c:1019
 #, c-format
@@ -2728,11 +2610,8 @@ msgid "can't redirect to `%s' (%s)"
 msgstr "impossible de rediriger vers « %s » (%s)"
 
 #: io.c:1073
-msgid ""
-"reached system limit for open files: starting to multiplex file descriptors"
-msgstr ""
-"limite système du nombre de fichiers ouverts atteinte : début du "
-"multiplexage des descripteurs de fichiers"
+msgid "reached system limit for open files: starting to multiplex file 
descriptors"
+msgstr "limite système du nombre de fichiers ouverts atteinte : début du 
multiplexage des descripteurs de fichiers"
 
 #: io.c:1089
 #, c-format
@@ -2750,8 +2629,7 @@ msgstr "close : le second argument doit être « to » 
ou « from »"
 #: io.c:1136
 #, c-format
 msgid "close: `%.*s' is not an open file, pipe or co-process"
-msgstr ""
-"close : « %.*s » n'est ni un fichier ouvert, ni un tube ou un 
co-processus"
+msgstr "close : « %.*s » n'est ni un fichier ouvert, ni un tube ou un 
co-processus"
 
 #: io.c:1141
 msgid "close of redirection that was never opened"
@@ -2760,9 +2638,7 @@ msgstr "fermeture d'une redirection qui n'a jamais été 
ouverte"
 #: io.c:1238
 #, c-format
 msgid "close: redirection `%s' not opened with `|&', second argument ignored"
-msgstr ""
-"close : la redirection « %s » n'a pas été ouverte avec « |& », 
second "
-"argument ignoré"
+msgstr "close : la redirection « %s » n'a pas été ouverte avec « |& 
», second argument ignoré"
 
 #: io.c:1255
 #, c-format
@@ -2827,8 +2703,7 @@ msgstr "le port local %s n'est pas valide dans « /inet 
»"
 #: io.c:1471
 #, c-format
 msgid "remote host and port information (%s, %s) invalid"
-msgstr ""
-"les informations sur l'hôte et le port distants (%s, %s) ne sont pas valides"
+msgstr "les informations sur l'hôte et le port distants (%s, %s) ne sont pas 
valides"
 
 #: io.c:1673
 msgid "TCP/IP communications are not supported"
@@ -2852,9 +2727,7 @@ msgstr "échec de la fermeture de stdout du processus 
fils (%s)"
 #: io.c:1909
 #, c-format
 msgid "moving slave pty to stdout in child failed (dup: %s)"
-msgstr ""
-"échec du déplacement du pty esclave vers le stdout du processus fils (dup 
: "
-"%s)"
+msgstr "échec du déplacement du pty esclave vers le stdout du processus fils 
(dup : %s)"
 
 #: io.c:1911 io.c:2097
 #, c-format
@@ -2864,9 +2737,7 @@ msgstr "échec de fermeture du stdin du processus fils 
(%s)"
 #: io.c:1914
 #, c-format
 msgid "moving slave pty to stdin in child failed (dup: %s)"
-msgstr ""
-"échec du déplacement du pty esclave vers le stdin du processus fils (dup : 
"
-"%s)"
+msgstr "échec du déplacement du pty esclave vers le stdin du processus fils 
(dup : %s)"
 
 #: io.c:1916 io.c:1938
 #, c-format
@@ -2917,9 +2788,7 @@ msgstr "register_input_parser : pointeur NULL reçu"
 #: io.c:2762
 #, c-format
 msgid "input parser `%s' conflicts with previously installed input parser `%s'"
-msgstr ""
-"l'analyseur d'entrée « %s » est en conflit avec l'analyseur « %s » 
déjà "
-"installé"
+msgstr "l'analyseur d'entrée « %s » est en conflit avec l'analyseur « 
%s » déjà installé"
 
 #: io.c:2769
 #, c-format
@@ -2932,10 +2801,8 @@ msgstr "register_output_wrapper : pointeur NULL reçu"
 
 #: io.c:2817
 #, c-format
-msgid ""
-"output wrapper `%s' conflicts with previously installed output wrapper `%s'"
-msgstr ""
-"le filtre de sortie « %s » est en conflit avec le filtre « %s » déjà
 installé"
+msgid "output wrapper `%s' conflicts with previously installed output wrapper 
`%s'"
+msgstr "le filtre de sortie « %s » est en conflit avec le filtre « %s 
» déjà installé"
 
 #: io.c:2824
 #, c-format
@@ -2948,12 +2815,8 @@ msgstr "register_output_processor : pointeur NULL reçu"
 
 #: io.c:2874
 #, c-format
-msgid ""
-"two-way processor `%s' conflicts with previously installed two-way processor "
-"`%s'"
-msgstr ""
-"le gestionnaire bidirectionnel « %s » est en conflit avec le gestionnaire 
"
-"« %s » déjà installé"
+msgid "two-way processor `%s' conflicts with previously installed two-way 
processor `%s'"
+msgstr "le gestionnaire bidirectionnel « %s » est en conflit avec le 
gestionnaire « %s » déjà installé"
 
 #: io.c:2883
 #, c-format
@@ -2971,8 +2834,7 @@ msgstr "impossible d'allouer plus de mémoire d'entrée"
 
 #: io.c:3636
 msgid "multicharacter value of `RS' is a gawk extension"
-msgstr ""
-"l'utilisation d'un « RS » de plusieurs caractères est une extension gawk"
+msgstr "l'utilisation d'un « RS » de plusieurs caractères est une 
extension gawk"
 
 #: io.c:3783
 msgid "IPv6 communication is not supported"
@@ -2980,9 +2842,7 @@ msgstr "les communications IPv6 ne sont pas disponibles"
 
 #: main.c:321
 msgid "environment variable `POSIXLY_CORRECT' set: turning on `--posix'"
-msgstr ""
-"variable d'environnement « POSIXLY__CORRECT » définie : activation de 
« --"
-"posix »"
+msgstr "variable d'environnement « POSIXLY__CORRECT » définie : 
activation de « --posix »"
 
 #: main.c:327
 msgid "`--posix' overrides `--traditional'"
@@ -2990,14 +2850,12 @@ msgstr "« --posix » prend le pas sur « 
--traditional »"
 
 #: main.c:338
 msgid "`--posix'/`--traditional' overrides `--non-decimal-data'"
-msgstr ""
-"« --posix » et « --traditional » prennent le pas sur « 
--non-decimal-data »"
+msgstr "« --posix » et « --traditional » prennent le pas sur « 
--non-decimal-data »"
 
 #: main.c:342
 #, c-format
 msgid "running %s setuid root may be a security problem"
-msgstr ""
-"l'exécution de %s en mode setuid root peut être un problème de sécurité"
+msgstr "l'exécution de %s en mode setuid root peut être un problème de 
sécurité"
 
 #: main.c:346
 msgid "`--posix' overrides `--characters-as-bytes'"
@@ -3025,14 +2883,12 @@ msgstr "aucun programme !"
 #: main.c:563
 #, c-format
 msgid "Usage: %s [POSIX or GNU style options] -f progfile [--] file ...\n"
-msgstr ""
-"Utilisation : %s [options GNU ou POSIX] -f fichier_prog [--] fichier ...\n"
+msgstr "Utilisation : %s [options GNU ou POSIX] -f fichier_prog [--] fichier 
...\n"
 
 #: main.c:565
 #, c-format
 msgid "Usage: %s [POSIX or GNU style options] [--] %cprogram%c file ...\n"
-msgstr ""
-"Utilisation : %s [options GNU ou POSIX] [--] %cprogramme%c fichier ...\n"
+msgstr "Utilisation : %s [options GNU ou POSIX] [--] %cprogramme%c fichier 
...\n"
 
 #: main.c:570
 msgid "POSIX options:\t\tGNU long options: (standard)\n"
@@ -3099,9 +2955,8 @@ msgid "\t-l library\t\t--load=library\n"
 msgstr "\t-l bibliothèque\t\t--load=bibliothèque\n"
 
 #: main.c:586
-#, fuzzy
 msgid "\t-L[fatal|invalid]\t--lint[=fatal|invalid]\n"
-msgstr "\t-L [fatal]\t\t--lint[=fatal]\n"
+msgstr "\t-L[fatal|invalid]\t--lint[=fatal|invalid]\n"
 
 #: main.c:587
 msgid "\t-M\t\t\t--bignum\n"
@@ -3309,7 +3164,7 @@ msgstr "argument vide de l'option « -e / --source » 
ignoré"
 
 #: main.c:1556
 msgid "-M ignored: MPFR/GMP support not compiled in"
-msgstr ""
+msgstr "-M sans effet : version compilée sans MPFR/GMP"
 
 #: main.c:1577
 #, c-format
@@ -3360,8 +3215,7 @@ msgstr "%s : l'argument #%d a une valeur incorrecte %Rg, 
utilisation de 0"
 
 #: mpfr.c:877
 msgid "%s: argument #%d negative value %Rg will give strange results"
-msgstr ""
-"%s : argument #%d : la valeur négative %Rg donnera des résultats 
inattendus"
+msgstr "%s : argument #%d : la valeur négative %Rg donnera des résultats 
inattendus"
 
 #: mpfr.c:883
 msgid "%s: argument #%d fractional value %Rg will be truncated"
@@ -3370,8 +3224,7 @@ msgstr "%s : argument #%d : la valeur non entière %Rg 
sera tronquée"
 #: mpfr.c:898
 #, c-format
 msgid "%s: argument #%d negative value %Zd will give strange results"
-msgstr ""
-"%s : argument #%d : la valeur négative %Zd donnera des résultats 
inattendus"
+msgstr "%s : argument #%d : la valeur négative %Zd donnera des résultats 
inattendus"
 
 #: msg.c:68
 #, c-format
@@ -3397,12 +3250,8 @@ msgstr "aucun chiffre hexadécimal dans la séquence 
d'échappement « \\x »
 
 #: node.c:567
 #, c-format
-msgid ""
-"hex escape \\x%.*s of %d characters probably not interpreted the way you "
-"expect"
-msgstr ""
-"la séquence d'échappement hexa. \\x%.*s de %d caractères ne sera "
-"probablement pas interprétée comme vous l'imaginez"
+msgid "hex escape \\x%.*s of %d characters probably not interpreted the way 
you expect"
+msgstr "la séquence d'échappement hexa. \\x%.*s de %d caractères ne sera 
probablement pas interprétée comme vous l'imaginez"
 
 #: node.c:582
 #, c-format
@@ -3410,24 +3259,18 @@ msgid "escape sequence `\\%c' treated as plain `%c'"
 msgstr "séquence d'échappement « \\%c » traitée comme un simple « %c 
»"
 
 #: node.c:726
-msgid ""
-"Invalid multibyte data detected. There may be a mismatch between your data "
-"and your locale."
-msgstr ""
-"Données multioctets non valables détectées. Possible incohérence entre "
-"données et paramètres régionaux (locale)."
+msgid "Invalid multibyte data detected. There may be a mismatch between your 
data and your locale."
+msgstr "Données multioctets non valables détectées. Possible incohérence 
entre données et paramètres régionaux (locale)."
 
 #: posix/gawkmisc.c:177
 #, c-format
 msgid "%s %s `%s': could not get fd flags: (fcntl F_GETFD: %s)"
-msgstr ""
-"%s %s « %s » : impossible d'obtenir les drapeaux du fd : (fcntl 
F_GETFD: %s)"
+msgstr "%s %s « %s » : impossible d'obtenir les drapeaux du fd : (fcntl 
F_GETFD: %s)"
 
 #: posix/gawkmisc.c:189
 #, c-format
 msgid "%s %s `%s': could not set close-on-exec: (fcntl F_SETFD: %s)"
-msgstr ""
-"%s %s « %s »: impossible de positionner close-on-exec: (fcntl F_SETFD: 
%s)"
+msgstr "%s %s « %s »: impossible de positionner close-on-exec: (fcntl 
F_SETFD: %s)"
 
 #: profile.c:71
 #, c-format
@@ -3439,12 +3282,12 @@ msgid "sending profile to standard error"
 msgstr "envoi du profil vers la sortie d'erreur standard"
 
 #: profile.c:193
-#, fuzzy, c-format
+#, c-format
 msgid ""
 "\t# %s rule(s)\n"
 "\n"
 msgstr ""
-"\t# Règle(s)\n"
+"\t# %s règle(s)\n"
 "\n"
 
 #: profile.c:198
@@ -3479,7 +3322,7 @@ msgstr ""
 msgid "\t# gawk profile, created %s\n"
 msgstr "\t# profile gawk, créé %s\n"
 
-#: profile.c:1521
+#: profile.c:1535
 #, c-format
 msgid ""
 "\n"
@@ -3488,7 +3331,7 @@ msgstr ""
 "\n"
 "\t# Fonctions, par ordre alphabétique\n"
 
-#: profile.c:1559
+#: profile.c:1573
 #, c-format
 msgid "redir2str: unknown redirection type %d"
 msgstr "redir2str : type de redirection %d inconnu"
@@ -3496,9 +3339,7 @@ msgstr "redir2str : type de redirection %d inconnu"
 #: re.c:607
 #, c-format
 msgid "regexp component `%.*s' should probably be `[%.*s]'"
-msgstr ""
-"le composant d'expression rationnelle « %.*s » devrait probablement être 
"
-"« [%.*s] »"
+msgstr "le composant d'expression rationnelle « %.*s » devrait 
probablement être « [%.*s] »"
 
 #: regcomp.c:139
 msgid "Success"
@@ -3529,9 +3370,8 @@ msgid "Invalid back reference"
 msgstr "Référence arrière incorrecte"
 
 #: regcomp.c:160
-#, fuzzy
 msgid "Unmatched [, [^, [:, [., or [="
-msgstr "[ ou [^ sans correspondance"
+msgstr "[, [^, [:, [. ou [= sans correspondance"
 
 #: regcomp.c:163
 msgid "Unmatched ( or \\("
@@ -3574,38 +3414,10 @@ msgid "No previous regular expression"
 msgstr "Aucune expression rationnelle précédente"
 
 #: symbol.c:677
-#, fuzzy, c-format
+#, c-format
 msgid "function `%s': can't use function `%s' as a parameter name"
-msgstr ""
-"fonction « %s » : impossible d'utiliser un nom de fonction comme 
paramètre"
+msgstr "fonction « %s » : impossible d'utiliser la fonction « %s » 
comme paramètre"
 
 #: symbol.c:809
 msgid "can not pop main context"
 msgstr "impossible de rétablir (pop) le contexte principal (main)"
-
-#~ msgid "`getline var' invalid inside `%s' rule"
-#~ msgstr "« getline var » n'est pas valable dans une règle « %s »"
-
-#~ msgid "no (known) protocol supplied in special filename `%s'"
-#~ msgstr ""
-#~ "aucun protocole (connu) n'a été fourni dans le nom de fichier spécial "
-#~ "« %s »"
-
-#~ msgid "special file name `%s' is incomplete"
-#~ msgstr "nom de fichier spécial « %s » incomplet"
-
-#~ msgid "must supply a remote hostname to `/inet'"
-#~ msgstr "un nom d'hôte distant doit être fourni à « /inet »"
-
-#~ msgid "must supply a remote port to `/inet'"
-#~ msgstr "un port distant doit être fourni à « /inet »"
-
-#~ msgid ""
-#~ "\t# %s block(s)\n"
-#~ "\n"
-#~ msgstr ""
-#~ "\t# Bloc(s) %s\n"
-#~ "\n"
-
-#~ msgid "range of the form `[%c-%c]' is locale dependent"
-#~ msgstr "les plages « [%c-%c] » sont dépendantes des paramètres 
régionaux"
diff --git a/po/gawk.pot b/po/gawk.pot
index 7f77887..d95d3bf 100644
--- a/po/gawk.pot
+++ b/po/gawk.pot
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: gawk 4.1.1c\n"
 "Report-Msgid-Bugs-To: address@hidden"
-"POT-Creation-Date: 2015-02-26 20:05+0200\n"
+"POT-Creation-Date: 2015-04-07 17:32+0300\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <address@hidden>\n"
 "Language-Team: LANGUAGE <address@hidden>\n"
@@ -99,417 +99,417 @@ msgstr ""
 msgid "sort comparison function `%s' is not defined"
 msgstr ""
 
-#: awkgram.y:226
+#: awkgram.y:225
 #, c-format
 msgid "%s blocks must have an action part"
 msgstr ""
 
-#: awkgram.y:229
+#: awkgram.y:228
 msgid "each rule must have a pattern or an action part"
 msgstr ""
 
-#: awkgram.y:320 awkgram.y:331
+#: awkgram.y:319 awkgram.y:330
 msgid "old awk does not support multiple `BEGIN' or `END' rules"
 msgstr ""
 
-#: awkgram.y:368
+#: awkgram.y:367
 #, c-format
 msgid "`%s' is a built-in function, it cannot be redefined"
 msgstr ""
 
-#: awkgram.y:417
+#: awkgram.y:416
 msgid "regexp constant `//' looks like a C++ comment, but is not"
 msgstr ""
 
-#: awkgram.y:421
+#: awkgram.y:420
 #, c-format
 msgid "regexp constant `/%s/' looks like a C comment, but is not"
 msgstr ""
 
-#: awkgram.y:513
+#: awkgram.y:512
 #, c-format
 msgid "duplicate case values in switch body: %s"
 msgstr ""
 
-#: awkgram.y:534
+#: awkgram.y:533
 msgid "duplicate `default' detected in switch body"
 msgstr ""
 
-#: awkgram.y:794 awkgram.y:3751
+#: awkgram.y:793 awkgram.y:3750
 msgid "`break' is not allowed outside a loop or switch"
 msgstr ""
 
-#: awkgram.y:803 awkgram.y:3743
+#: awkgram.y:802 awkgram.y:3742
 msgid "`continue' is not allowed outside a loop"
 msgstr ""
 
-#: awkgram.y:813
+#: awkgram.y:812
 #, c-format
 msgid "`next' used in %s action"
 msgstr ""
 
-#: awkgram.y:822
+#: awkgram.y:821
 #, c-format
 msgid "`nextfile' used in %s action"
 msgstr ""
 
-#: awkgram.y:846
+#: awkgram.y:845
 msgid "`return' used outside function context"
 msgstr ""
 
-#: awkgram.y:920
+#: awkgram.y:919
 msgid "plain `print' in BEGIN or END rule should probably be `print \"\"'"
 msgstr ""
 
-#: awkgram.y:986 awkgram.y:1035
+#: awkgram.y:985 awkgram.y:1034
 msgid "`delete' is not allowed with SYMTAB"
 msgstr ""
 
-#: awkgram.y:988 awkgram.y:1037
+#: awkgram.y:987 awkgram.y:1036
 msgid "`delete' is not allowed with FUNCTAB"
 msgstr ""
 
-#: awkgram.y:1022 awkgram.y:1026
+#: awkgram.y:1021 awkgram.y:1025
 msgid "`delete(array)' is a non-portable tawk extension"
 msgstr ""
 
-#: awkgram.y:1147
+#: awkgram.y:1146
 msgid "multistage two-way pipelines don't work"
 msgstr ""
 
-#: awkgram.y:1262
+#: awkgram.y:1261
 msgid "regular expression on right of assignment"
 msgstr ""
 
-#: awkgram.y:1273
+#: awkgram.y:1272
 msgid "regular expression on left of `~' or `!~' operator"
 msgstr ""
 
-#: awkgram.y:1289 awkgram.y:1431
+#: awkgram.y:1288 awkgram.y:1430
 msgid "old awk does not support the keyword `in' except after `for'"
 msgstr ""
 
-#: awkgram.y:1299
+#: awkgram.y:1298
 msgid "regular expression on right of comparison"
 msgstr ""
 
-#: awkgram.y:1411
+#: awkgram.y:1410
 #, c-format
 msgid "non-redirected `getline' invalid inside `%s' rule"
 msgstr ""
 
-#: awkgram.y:1414
+#: awkgram.y:1413
 msgid "non-redirected `getline' undefined inside END action"
 msgstr ""
 
-#: awkgram.y:1433
+#: awkgram.y:1432
 msgid "old awk does not support multidimensional arrays"
 msgstr ""
 
-#: awkgram.y:1530
+#: awkgram.y:1529
 msgid "call of `length' without parentheses is not portable"
 msgstr ""
 
-#: awkgram.y:1596
+#: awkgram.y:1595
 msgid "indirect function calls are a gawk extension"
 msgstr ""
 
-#: awkgram.y:1609
+#: awkgram.y:1608
 #, c-format
 msgid "can not use special variable `%s' for indirect function call"
 msgstr ""
 
-#: awkgram.y:1635
+#: awkgram.y:1634
 #, c-format
 msgid "attempt to use non-function `%s' in function call"
 msgstr ""
 
-#: awkgram.y:1699
+#: awkgram.y:1698
 msgid "invalid subscript expression"
 msgstr ""
 
-#: awkgram.y:2045 awkgram.y:2065 gawkapi.c:206 gawkapi.c:224 msg.c:126
+#: awkgram.y:2044 awkgram.y:2064 gawkapi.c:206 gawkapi.c:224 msg.c:126
 msgid "warning: "
 msgstr ""
 
-#: awkgram.y:2063 gawkapi.c:192 gawkapi.c:221 msg.c:158
+#: awkgram.y:2062 gawkapi.c:192 gawkapi.c:221 msg.c:158
 msgid "fatal: "
 msgstr ""
 
-#: awkgram.y:2113
+#: awkgram.y:2112
 msgid "unexpected newline or end of string"
 msgstr ""
 
-#: awkgram.y:2392 awkgram.y:2468 awkgram.y:2691 debug.c:523 debug.c:539
+#: awkgram.y:2391 awkgram.y:2467 awkgram.y:2690 debug.c:523 debug.c:539
 #: debug.c:2812 debug.c:5055
 #, c-format
 msgid "can't open source file `%s' for reading (%s)"
 msgstr ""
 
-#: awkgram.y:2393 awkgram.y:2518
+#: awkgram.y:2392 awkgram.y:2517
 #, c-format
 msgid "can't open shared library `%s' for reading (%s)"
 msgstr ""
 
-#: awkgram.y:2395 awkgram.y:2469 awkgram.y:2519 builtin.c:135 debug.c:5206
+#: awkgram.y:2394 awkgram.y:2468 awkgram.y:2518 builtin.c:135 debug.c:5206
 msgid "reason unknown"
 msgstr ""
 
-#: awkgram.y:2404 awkgram.y:2428
+#: awkgram.y:2403 awkgram.y:2427
 #, c-format
 msgid "can't include `%s' and use it as a program file"
 msgstr ""
 
-#: awkgram.y:2417
+#: awkgram.y:2416
 #, c-format
 msgid "already included source file `%s'"
 msgstr ""
 
-#: awkgram.y:2418
+#: awkgram.y:2417
 #, c-format
 msgid "already loaded shared library `%s'"
 msgstr ""
 
-#: awkgram.y:2453
+#: awkgram.y:2452
 msgid "@include is a gawk extension"
 msgstr ""
 
-#: awkgram.y:2459
+#: awkgram.y:2458
 msgid "empty filename after @include"
 msgstr ""
 
-#: awkgram.y:2503
+#: awkgram.y:2502
 msgid "@load is a gawk extension"
 msgstr ""
 
-#: awkgram.y:2509
+#: awkgram.y:2508
 msgid "empty filename after @load"
 msgstr ""
 
-#: awkgram.y:2643
+#: awkgram.y:2642
 msgid "empty program text on command line"
 msgstr ""
 
-#: awkgram.y:2758
+#: awkgram.y:2757
 #, c-format
 msgid "can't read sourcefile `%s' (%s)"
 msgstr ""
 
-#: awkgram.y:2769
+#: awkgram.y:2768
 #, c-format
 msgid "source file `%s' is empty"
 msgstr ""
 
-#: awkgram.y:2828
+#: awkgram.y:2827
 #, c-format
 msgid "PEBKAC error: invalid character '\\%03o' in source code"
 msgstr ""
 
-#: awkgram.y:2959
+#: awkgram.y:2958
 msgid "source file does not end in newline"
 msgstr ""
 
-#: awkgram.y:3062
+#: awkgram.y:3061
 msgid "unterminated regexp ends with `\\' at end of file"
 msgstr ""
 
-#: awkgram.y:3089
+#: awkgram.y:3088
 #, c-format
 msgid "%s: %d: tawk regex modifier `/.../%c' doesn't work in gawk"
 msgstr ""
 
-#: awkgram.y:3093
+#: awkgram.y:3092
 #, c-format
 msgid "tawk regex modifier `/.../%c' doesn't work in gawk"
 msgstr ""
 
-#: awkgram.y:3100
+#: awkgram.y:3099
 msgid "unterminated regexp"
 msgstr ""
 
-#: awkgram.y:3104
+#: awkgram.y:3103
 msgid "unterminated regexp at end of file"
 msgstr ""
 
-#: awkgram.y:3162
+#: awkgram.y:3161
 msgid "use of `\\ #...' line continuation is not portable"
 msgstr ""
 
-#: awkgram.y:3178
+#: awkgram.y:3177
 msgid "backslash not last character on line"
 msgstr ""
 
-#: awkgram.y:3239
+#: awkgram.y:3238
 msgid "POSIX does not allow operator `**='"
 msgstr ""
 
-#: awkgram.y:3241
+#: awkgram.y:3240
 msgid "old awk does not support operator `**='"
 msgstr ""
 
-#: awkgram.y:3250
+#: awkgram.y:3249
 msgid "POSIX does not allow operator `**'"
 msgstr ""
 
-#: awkgram.y:3252
+#: awkgram.y:3251
 msgid "old awk does not support operator `**'"
 msgstr ""
 
-#: awkgram.y:3287
+#: awkgram.y:3286
 msgid "operator `^=' is not supported in old awk"
 msgstr ""
 
-#: awkgram.y:3295
+#: awkgram.y:3294
 msgid "operator `^' is not supported in old awk"
 msgstr ""
 
-#: awkgram.y:3392 awkgram.y:3410 command.y:1180
+#: awkgram.y:3391 awkgram.y:3409 command.y:1180
 msgid "unterminated string"
 msgstr ""
 
-#: awkgram.y:3631
+#: awkgram.y:3630
 #, c-format
 msgid "invalid char '%c' in expression"
 msgstr ""
 
-#: awkgram.y:3678
+#: awkgram.y:3677
 #, c-format
 msgid "`%s' is a gawk extension"
 msgstr ""
 
-#: awkgram.y:3683
+#: awkgram.y:3682
 #, c-format
 msgid "POSIX does not allow `%s'"
 msgstr ""
 
-#: awkgram.y:3691
+#: awkgram.y:3690
 #, c-format
 msgid "`%s' is not supported in old awk"
 msgstr ""
 
-#: awkgram.y:3781
+#: awkgram.y:3780
 msgid "`goto' considered harmful!\n"
 msgstr ""
 
-#: awkgram.y:3815
+#: awkgram.y:3814
 #, c-format
 msgid "%d is invalid as number of arguments for %s"
 msgstr ""
 
-#: awkgram.y:3850
+#: awkgram.y:3849
 #, c-format
 msgid "%s: string literal as last arg of substitute has no effect"
 msgstr ""
 
-#: awkgram.y:3855
+#: awkgram.y:3854
 #, c-format
 msgid "%s third parameter is not a changeable object"
 msgstr ""
 
-#: awkgram.y:3938 awkgram.y:3941
+#: awkgram.y:3937 awkgram.y:3940
 msgid "match: third argument is a gawk extension"
 msgstr ""
 
-#: awkgram.y:3995 awkgram.y:3998
+#: awkgram.y:3994 awkgram.y:3997
 msgid "close: second argument is a gawk extension"
 msgstr ""
 
-#: awkgram.y:4010
+#: awkgram.y:4009
 msgid "use of dcgettext(_\"...\") is incorrect: remove leading underscore"
 msgstr ""
 
-#: awkgram.y:4025
+#: awkgram.y:4024
 msgid "use of dcngettext(_\"...\") is incorrect: remove leading underscore"
 msgstr ""
 
-#: awkgram.y:4044
+#: awkgram.y:4043
 msgid "index: regexp constant as second argument is not allowed"
 msgstr ""
 
-#: awkgram.y:4097
+#: awkgram.y:4096
 #, c-format
 msgid "function `%s': parameter `%s' shadows global variable"
 msgstr ""
 
-#: awkgram.y:4154 debug.c:4041 debug.c:4084 debug.c:5204
+#: awkgram.y:4153 debug.c:4041 debug.c:4084 debug.c:5204
 #, c-format
 msgid "could not open `%s' for writing (%s)"
 msgstr ""
 
-#: awkgram.y:4155
+#: awkgram.y:4154
 msgid "sending variable list to standard error"
 msgstr ""
 
-#: awkgram.y:4163
+#: awkgram.y:4162
 #, c-format
 msgid "%s: close failed (%s)"
 msgstr ""
 
-#: awkgram.y:4188
+#: awkgram.y:4187
 msgid "shadow_funcs() called twice!"
 msgstr ""
 
-#: awkgram.y:4196
+#: awkgram.y:4195
 msgid "there were shadowed variables."
 msgstr ""
 
-#: awkgram.y:4267
+#: awkgram.y:4266
 #, c-format
 msgid "function name `%s' previously defined"
 msgstr ""
 
-#: awkgram.y:4313
+#: awkgram.y:4312
 #, c-format
 msgid "function `%s': can't use function name as parameter name"
 msgstr ""
 
-#: awkgram.y:4316
+#: awkgram.y:4315
 #, c-format
 msgid "function `%s': can't use special variable `%s' as a function parameter"
 msgstr ""
 
-#: awkgram.y:4324
+#: awkgram.y:4323
 #, c-format
 msgid "function `%s': parameter #%d, `%s', duplicates parameter #%d"
 msgstr ""
 
-#: awkgram.y:4411 awkgram.y:4417
+#: awkgram.y:4410 awkgram.y:4416
 #, c-format
 msgid "function `%s' called but never defined"
 msgstr ""
 
-#: awkgram.y:4421
+#: awkgram.y:4420
 #, c-format
 msgid "function `%s' defined but never called directly"
 msgstr ""
 
-#: awkgram.y:4453
+#: awkgram.y:4452
 #, c-format
 msgid "regexp constant for parameter #%d yields boolean value"
 msgstr ""
 
-#: awkgram.y:4468
+#: awkgram.y:4467
 #, c-format
 msgid ""
 "function `%s' called with space between name and `(',\n"
 "or used as a variable or an array"
 msgstr ""
 
-#: awkgram.y:4674
+#: awkgram.y:4673
 msgid "division by zero attempted"
 msgstr ""
 
-#: awkgram.y:4683
+#: awkgram.y:4682
 #, c-format
 msgid "division by zero attempted in `%%'"
 msgstr ""
 
-#: awkgram.y:5003
+#: awkgram.y:5002
 msgid ""
 "cannot assign a value to the result of a field post-increment expression"
 msgstr ""
 
-#: awkgram.y:5006
+#: awkgram.y:5005
 #, c-format
 msgid "invalid target of assignment (opcode %s)"
 msgstr ""
@@ -825,109 +825,119 @@ msgstr ""
 msgid "gensub: third argument %g treated as 1"
 msgstr ""
 
-#: builtin.c:3020
+#: builtin.c:3018
+#, c-format
+msgid "%s: can be called indirectly only with two arguments"
+msgstr ""
+
+#: builtin.c:3108
+#, c-format
+msgid "indirect call to %s requires at least two arguments"
+msgstr ""
+
+#: builtin.c:3160
 msgid "lshift: received non-numeric first argument"
 msgstr ""
 
-#: builtin.c:3022
+#: builtin.c:3162
 msgid "lshift: received non-numeric second argument"
 msgstr ""
 
-#: builtin.c:3028
+#: builtin.c:3168
 #, c-format
 msgid "lshift(%f, %f): negative values will give strange results"
 msgstr ""
 
-#: builtin.c:3030
+#: builtin.c:3170
 #, c-format
 msgid "lshift(%f, %f): fractional values will be truncated"
 msgstr ""
 
-#: builtin.c:3032
+#: builtin.c:3172
 #, c-format
 msgid "lshift(%f, %f): too large shift value will give strange results"
 msgstr ""
 
-#: builtin.c:3057
+#: builtin.c:3197
 msgid "rshift: received non-numeric first argument"
 msgstr ""
 
-#: builtin.c:3059
+#: builtin.c:3199
 msgid "rshift: received non-numeric second argument"
 msgstr ""
 
-#: builtin.c:3065
+#: builtin.c:3205
 #, c-format
 msgid "rshift(%f, %f): negative values will give strange results"
 msgstr ""
 
-#: builtin.c:3067
+#: builtin.c:3207
 #, c-format
 msgid "rshift(%f, %f): fractional values will be truncated"
 msgstr ""
 
-#: builtin.c:3069
+#: builtin.c:3209
 #, c-format
 msgid "rshift(%f, %f): too large shift value will give strange results"
 msgstr ""
 
-#: builtin.c:3094 mpfr.c:988
+#: builtin.c:3234 mpfr.c:988
 msgid "and: called with less than two arguments"
 msgstr ""
 
-#: builtin.c:3099
+#: builtin.c:3239
 #, c-format
 msgid "and: argument %d is non-numeric"
 msgstr ""
 
-#: builtin.c:3103
+#: builtin.c:3243
 #, c-format
 msgid "and: argument %d negative value %g will give strange results"
 msgstr ""
 
-#: builtin.c:3126 mpfr.c:1020
+#: builtin.c:3266 mpfr.c:1020
 msgid "or: called with less than two arguments"
 msgstr ""
 
-#: builtin.c:3131
+#: builtin.c:3271
 #, c-format
 msgid "or: argument %d is non-numeric"
 msgstr ""
 
-#: builtin.c:3135
+#: builtin.c:3275
 #, c-format
 msgid "or: argument %d negative value %g will give strange results"
 msgstr ""
 
-#: builtin.c:3157 mpfr.c:1051
+#: builtin.c:3297 mpfr.c:1051
 msgid "xor: called with less than two arguments"
 msgstr ""
 
-#: builtin.c:3163
+#: builtin.c:3303
 #, c-format
 msgid "xor: argument %d is non-numeric"
 msgstr ""
 
-#: builtin.c:3167
+#: builtin.c:3307
 #, c-format
 msgid "xor: argument %d negative value %g will give strange results"
 msgstr ""
 
-#: builtin.c:3192 mpfr.c:807
+#: builtin.c:3332 mpfr.c:807
 msgid "compl: received non-numeric argument"
 msgstr ""
 
-#: builtin.c:3198
+#: builtin.c:3338
 #, c-format
 msgid "compl(%f): negative value will give strange results"
 msgstr ""
 
-#: builtin.c:3200
+#: builtin.c:3340
 #, c-format
 msgid "compl(%f): fractional value will be truncated"
 msgstr ""
 
-#: builtin.c:3369
+#: builtin.c:3509
 #, c-format
 msgid "dcgettext: `%s' is not a valid locale category"
 msgstr ""
@@ -3279,14 +3289,14 @@ msgstr ""
 msgid "\t# gawk profile, created %s\n"
 msgstr ""
 
-#: profile.c:1521
+#: profile.c:1535
 #, c-format
 msgid ""
 "\n"
 "\t# Functions, listed alphabetically\n"
 msgstr ""
 
-#: profile.c:1559
+#: profile.c:1573
 #, c-format
 msgid "redir2str: unknown redirection type %d"
 msgstr ""
diff --git a/po/vi.po b/po/vi.po
index 2bd6f42..7d4733e 100644
--- a/po/vi.po
+++ b/po/vi.po
@@ -1,16 +1,16 @@
 # Vietnamese translation for Gawk.
 # Bản dịch Tiếng Việt dành cho Gawk.
-# Copyright © 2014 Free Software Foundation, Inc.
+# Copyright © 2015 Free Software Foundation, Inc.
 # This file is distributed under the same license as the gawk package.
 # Clytie Siddall <address@hidden>, 2005-2010.
-# Trần Ngọc Quân <address@hidden>, 2012-2014.
+# Trần Ngọc Quân <address@hidden>, 2012-2014, 2015.
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: gawk-4.1.0b\n"
+"Project-Id-Version: gawk 4.1.1c\n"
 "Report-Msgid-Bugs-To: address@hidden"
-"POT-Creation-Date: 2015-02-26 20:05+0200\n"
-"PO-Revision-Date: 2014-01-16 14:52+0700\n"
+"POT-Creation-Date: 2015-04-07 17:32+0300\n"
+"PO-Revision-Date: 2015-04-08 08:06+0700\n"
 "Last-Translator: Trần Ngọc Quân <address@hidden>\n"
 "Language-Team: Vietnamese <address@hidden>\n"
 "Language: vi\n"
@@ -18,8 +18,6 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Poedit 1.5.5\n"
-"X-Poedit-SourceCharset: UTF-8\n"
 
 #: array.c:256
 #, c-format
@@ -50,7 +48,7 @@ msgstr "cố gắng dùng mảng “%s” trong một ngữ 
cảnh vô hướng"
 #: array.c:583
 #, c-format
 msgid "delete: index `%s' not in array `%s'"
-msgstr "delete: (xoá) chỉ số “%s” không nằm trong mảng “%s”"
+msgstr "delete: (xóa) chỉ số “%s” không nằm trong mảng “%s”"
 
 #: array.c:597
 #, c-format
@@ -79,27 +77,19 @@ msgstr "asorti: đối số thứ nhất không phải là 
một mảng"
 
 #: array.c:831
 msgid "asort: cannot use a subarray of first arg for second arg"
-msgstr ""
-"asort (một chương trình xắp xếp thứ tự): không thể sử 
dụng mảng con của tham "
-"số thứ nhất cho tham số thứ hai"
+msgstr "asort (một chương trình xắp xếp thứ tự): không thể 
sử dụng mảng con của tham số thứ nhất cho tham số thứ hai"
 
 #: array.c:832
 msgid "asorti: cannot use a subarray of first arg for second arg"
-msgstr ""
-"asorti (một chương trình xắp xếp thứ tự): không thể sử 
dụng mảng con của "
-"tham số thứ nhất cho tham số thứ hai"
+msgstr "asorti (một chương trình xắp xếp thứ tự): không thể 
sử dụng mảng con của tham số thứ nhất cho tham số thứ hai"
 
 #: array.c:837
 msgid "asort: cannot use a subarray of second arg for first arg"
-msgstr ""
-"asort (một chương trình xắp xếp thứ tự): không thể sử 
dụng mảng con của tham "
-"số thứ hai cho tham số thứ nhất"
+msgstr "asort (một chương trình xắp xếp thứ tự): không thể 
sử dụng mảng con của tham số thứ hai cho tham số thứ nhất"
 
 #: array.c:838
 msgid "asorti: cannot use a subarray of second arg for first arg"
-msgstr ""
-"asorti (một chương trình xắp xếp thứ tự): không thể sử 
dụng mảng con của "
-"tham số thứ hai cho tham số thứ nhất"
+msgstr "asorti (một chương trình xắp xếp thứ tự): không thể 
sử dụng mảng con của tham số thứ hai cho tham số thứ nhất"
 
 #: array.c:1313
 #, c-format
@@ -111,417 +101,396 @@ msgstr "“%s” không phải là tên hàm hợp lệ"
 msgid "sort comparison function `%s' is not defined"
 msgstr "chưa định nghĩa hàm so sánh xắp xếp “%s”"
 
-#: awkgram.y:226
+#: awkgram.y:225
 #, c-format
 msgid "%s blocks must have an action part"
 msgstr "Mọi khối %s phải có một phần kiểu hành động"
 
-#: awkgram.y:229
+#: awkgram.y:228
 msgid "each rule must have a pattern or an action part"
 msgstr "Mọi quy tắc phải có một mẫu hay phần kiểu hành động"
 
-#: awkgram.y:320 awkgram.y:331
+#: awkgram.y:319 awkgram.y:330
 msgid "old awk does not support multiple `BEGIN' or `END' rules"
-msgstr ""
-"awk cũ không hỗ trợ nhiều quy tắc kiểu “BEGIN” (bắt đầu) 
hay “END” (kết thúc)"
+msgstr "awk cũ không hỗ trợ nhiều quy tắc kiểu “BEGIN” (bắt 
đầu) hay “END” (kết thúc)"
 
-#: awkgram.y:368
+#: awkgram.y:367
 #, c-format
 msgid "`%s' is a built-in function, it cannot be redefined"
 msgstr "“%s” là một hàm có sẵn nên nó không thể được 
định nghĩa lại."
 
-#: awkgram.y:417
+#: awkgram.y:416
 msgid "regexp constant `//' looks like a C++ comment, but is not"
-msgstr ""
-"hằng biểu thức chính quy “//” trông giống như một chú 
thích C++, nhưng mà "
-"không phải"
+msgstr "hằng biểu thức chính quy “//” trông giống như một 
chú thích C++, nhưng mà không phải"
 
-#: awkgram.y:421
+#: awkgram.y:420
 #, c-format
 msgid "regexp constant `/%s/' looks like a C comment, but is not"
-msgstr ""
-"hằng biểu thức chính quy “/%s/” trông giống như một chú 
thích C, nhưng mà "
-"không phải"
+msgstr "hằng biểu thức chính quy “/%s/” trông giống như một 
chú thích C, nhưng mà không phải"
 
-#: awkgram.y:513
+#: awkgram.y:512
 #, c-format
 msgid "duplicate case values in switch body: %s"
 msgstr "gặp giá trị case trùng trong thân chuyển đổi (switch 
body): %s"
 
-#: awkgram.y:534
+#: awkgram.y:533
 msgid "duplicate `default' detected in switch body"
-msgstr ""
-"đã phát hiện trùng “default” trong thân cấu trúc điều 
khiển chọn lựa (switch)"
+msgstr "đã phát hiện trùng “default” trong thân cấu trúc điều 
khiển chọn lựa (switch)"
 
-#: awkgram.y:794 awkgram.y:3751
+#: awkgram.y:793 awkgram.y:3750
 msgid "`break' is not allowed outside a loop or switch"
-msgstr ""
-"không cho phép “break” (ngắt) nằm ở ngoại vòng lặp hay cấu 
trúc chọn lựa"
+msgstr "không cho phép “break” (ngắt) nằm ở ngoại vòng lặp 
hay cấu trúc chọn lựa"
 
-#: awkgram.y:803 awkgram.y:3743
+#: awkgram.y:802 awkgram.y:3742
 msgid "`continue' is not allowed outside a loop"
 msgstr "không cho phép “continue” (tiếp tục) ở ngoài một vòng 
lặp"
 
-#: awkgram.y:813
+#: awkgram.y:812
 #, c-format
 msgid "`next' used in %s action"
 msgstr "“next” (kế tiếp) được dùng trong hành động %s"
 
-#: awkgram.y:822
+#: awkgram.y:821
 #, c-format
 msgid "`nextfile' used in %s action"
 msgstr "“nextfile” (tập tin kế tiếp) được dùng trong hành 
động %s"
 
-#: awkgram.y:846
+#: awkgram.y:845
 msgid "`return' used outside function context"
 msgstr "“return” (trở về) được dùng ở ngoại ngữ cảnh hàm"
 
-#: awkgram.y:920
+#: awkgram.y:919
 msgid "plain `print' in BEGIN or END rule should probably be `print \"\"'"
-msgstr ""
-"“print” (in) thường trong quy tắc “BEGIN” (bắt đầu) hay 
“END” (kết thúc) gần "
-"như chắc chắn nên là “print”””"
+msgstr "“print” (in) thường trong quy tắc “BEGIN” (bắt đầu) 
hay “END” (kết thúc) gần như chắc chắn nên là “print”””"
 
-#: awkgram.y:986 awkgram.y:1035
+#: awkgram.y:985 awkgram.y:1034
 msgid "`delete' is not allowed with SYMTAB"
 msgstr "“delete” không được phép với SYMTAB"
 
-#: awkgram.y:988 awkgram.y:1037
+#: awkgram.y:987 awkgram.y:1036
 msgid "`delete' is not allowed with FUNCTAB"
 msgstr "“delete” không được phép với FUNCTAB"
 
-#: awkgram.y:1022 awkgram.y:1026
+#: awkgram.y:1021 awkgram.y:1025
 msgid "`delete(array)' is a non-portable tawk extension"
-msgstr "“delete array” (xoá mảng) là phần mở rộng gawk không 
khả chuyển"
+msgstr "“delete array” (xóa mảng) là phần mở rộng gawk không 
khả chuyển"
 
-#: awkgram.y:1147
+#: awkgram.y:1146
 msgid "multistage two-way pipelines don't work"
 msgstr "đường ống dẫn hai chiếu đa giai đoạn không phải 
hoạt động được"
 
-#: awkgram.y:1262
+#: awkgram.y:1261
 msgid "regular expression on right of assignment"
 msgstr "biểu thức chính quy nằm bên phải phép gán"
 
-#: awkgram.y:1273
+#: awkgram.y:1272
 msgid "regular expression on left of `~' or `!~' operator"
 msgstr "biểu thức chính quy nằm bên trái toán tử “~” hay 
“!~”"
 
-#: awkgram.y:1289 awkgram.y:1431
+#: awkgram.y:1288 awkgram.y:1430
 msgid "old awk does not support the keyword `in' except after `for'"
-msgstr "awk cũ không hỗ trợ từ khoá “in”, trừ khi nằm sau 
“for”"
+msgstr "awk cũ không hỗ trợ từ khóa “in”, trừ khi nằm sau 
“for”"
 
-#: awkgram.y:1299
+#: awkgram.y:1298
 msgid "regular expression on right of comparison"
 msgstr "biểu thức chính quy nằm bên phải sự so sánh"
 
-#: awkgram.y:1411
-#, fuzzy, c-format
+#: awkgram.y:1410
+#, c-format
 msgid "non-redirected `getline' invalid inside `%s' rule"
-msgstr "“getline” không hợp lệ trong quy tắc “%s”"
+msgstr "“getline” không-chuyển-hướng không hợp lệ trong quy 
tắc “%s”"
 
-#: awkgram.y:1414
+#: awkgram.y:1413
 msgid "non-redirected `getline' undefined inside END action"
-msgstr ""
-"trong hành động “END” (kết thúc) có “getline” (lấy dòng) 
không được chuyển "
-"hướng lại và chưa được định nghĩa."
+msgstr "trong hành động “END” (kết thúc) có “getline” (lấy 
dòng) không được chuyển hướng lại và chưa được định 
nghĩa."
 
-#: awkgram.y:1433
+#: awkgram.y:1432
 msgid "old awk does not support multidimensional arrays"
 msgstr "awk cũ không hỗ trợ mảng đa chiều"
 
-#: awkgram.y:1530
+#: awkgram.y:1529
 msgid "call of `length' without parentheses is not portable"
-msgstr ""
-"lời gọi “length” (độ dài) mà không có dấu ngoặc đơn là 
không tương thích "
-"trên các hệ thống khác"
+msgstr "lời gọi “length” (độ dài) mà không có dấu ngoặc 
đơn là không tương thích trên các hệ thống khác"
 
-#: awkgram.y:1596
+#: awkgram.y:1595
 msgid "indirect function calls are a gawk extension"
 msgstr "cuộc gọi hàm gián tiếp là một phần mở rộng gawk"
 
-#: awkgram.y:1609
+#: awkgram.y:1608
 #, c-format
 msgid "can not use special variable `%s' for indirect function call"
 msgstr "không thể dùng biến đặc biệt “%s” cho cú gọi hàm 
gián tiếp"
 
-#: awkgram.y:1635
-#, fuzzy, c-format
+#: awkgram.y:1634
+#, c-format
 msgid "attempt to use non-function `%s' in function call"
-msgstr "cố gắng dùng hàm “%s” như mảng"
+msgstr "cố gắng dùng không-phải-hàm “%s” trong cú gọi hàm"
 
-#: awkgram.y:1699
+#: awkgram.y:1698
 msgid "invalid subscript expression"
 msgstr "biểu thức in thấp không hợp lệ"
 
-#: awkgram.y:2045 awkgram.y:2065 gawkapi.c:206 gawkapi.c:224 msg.c:126
+#: awkgram.y:2044 awkgram.y:2064 gawkapi.c:206 gawkapi.c:224 msg.c:126
 msgid "warning: "
 msgstr "cảnh báo: "
 
-#: awkgram.y:2063 gawkapi.c:192 gawkapi.c:221 msg.c:158
+#: awkgram.y:2062 gawkapi.c:192 gawkapi.c:221 msg.c:158
 msgid "fatal: "
 msgstr "lỗi nghiêm trọng: "
 
-#: awkgram.y:2113
+#: awkgram.y:2112
 msgid "unexpected newline or end of string"
 msgstr "gặp dòng mới hay kết thúc chuỗi bất ngờ"
 
-#: awkgram.y:2392 awkgram.y:2468 awkgram.y:2691 debug.c:523 debug.c:539
+#: awkgram.y:2391 awkgram.y:2467 awkgram.y:2690 debug.c:523 debug.c:539
 #: debug.c:2812 debug.c:5055
 #, c-format
 msgid "can't open source file `%s' for reading (%s)"
 msgstr "không thể mở tập tin nguồn “%s” để đọc (%s)"
 
-#: awkgram.y:2393 awkgram.y:2518
+#: awkgram.y:2392 awkgram.y:2517
 #, c-format
 msgid "can't open shared library `%s' for reading (%s)"
 msgstr "không thể mở tập thư viện chia sẻ “%s” để đọc 
(%s)"
 
-#: awkgram.y:2395 awkgram.y:2469 awkgram.y:2519 builtin.c:135 debug.c:5206
+#: awkgram.y:2394 awkgram.y:2468 awkgram.y:2518 builtin.c:135 debug.c:5206
 msgid "reason unknown"
 msgstr "không rõ lý do"
 
-#: awkgram.y:2404 awkgram.y:2428
+#: awkgram.y:2403 awkgram.y:2427
 #, c-format
 msgid "can't include `%s' and use it as a program file"
 msgstr "không thể bao gồm “%s” và dùng nó như là tập tin 
chương trình"
 
-#: awkgram.y:2417
+#: awkgram.y:2416
 #, c-format
 msgid "already included source file `%s'"
 msgstr "đã sẵn bao gồm tập tin nguồn “%s”"
 
-#: awkgram.y:2418
+#: awkgram.y:2417
 #, c-format
 msgid "already loaded shared library `%s'"
 msgstr "thư viện dùng chung “%s” đã được sẵn được tải 
rồi"
 
-#: awkgram.y:2453
+#: awkgram.y:2452
 msgid "@include is a gawk extension"
 msgstr "@include là phần mở rộng của gawk"
 
-#: awkgram.y:2459
+#: awkgram.y:2458
 msgid "empty filename after @include"
 msgstr "tập tin trống sau @include"
 
-#: awkgram.y:2503
+#: awkgram.y:2502
 msgid "@load is a gawk extension"
 msgstr "@load là một phần mở rộng gawk"
 
-#: awkgram.y:2509
+#: awkgram.y:2508
 msgid "empty filename after @load"
 msgstr "tên tập tin trống sau @load"
 
-#: awkgram.y:2643
+#: awkgram.y:2642
 msgid "empty program text on command line"
 msgstr "gặp đoạn chữ chương trình rỗng nằm trên dòng lệnh"
 
-#: awkgram.y:2758
+#: awkgram.y:2757
 #, c-format
 msgid "can't read sourcefile `%s' (%s)"
 msgstr "không thể đọc tập tin nguồn “%s” (%s)"
 
-#: awkgram.y:2769
+#: awkgram.y:2768
 #, c-format
 msgid "source file `%s' is empty"
 msgstr "tập tin nguồn “%s” là rỗng"
 
-#: awkgram.y:2828
+#: awkgram.y:2827
 #, c-format
 msgid "PEBKAC error: invalid character '\\%03o' in source code"
-msgstr ""
+msgstr "lỗi PEBKAC: gặp ký tự không hợp lệ “\\%03o” trong mã 
nguồn"
 
-#: awkgram.y:2959
+#: awkgram.y:2958
 msgid "source file does not end in newline"
 msgstr "tập tin nguồn không kết thúc với một dòng mới"
 
-#: awkgram.y:3062
+#: awkgram.y:3061
 msgid "unterminated regexp ends with `\\' at end of file"
-msgstr ""
-"biểu thức chính quy chưa được chấm dứt kết thúc với 
“\\” tại kết thúc của "
-"tập tin"
+msgstr "biểu thức chính quy chưa được chấm dứt kết thúc với 
“\\” tại kết thúc của tập tin"
 
-#: awkgram.y:3089
+#: awkgram.y:3088
 #, c-format
 msgid "%s: %d: tawk regex modifier `/.../%c' doesn't work in gawk"
-msgstr ""
-"%s: %d: bộ sửa đổi biểu thức chính quy tawk “/.../%c” không 
hoạt động được "
-"trong gawk"
+msgstr "%s: %d: bộ sửa đổi biểu thức chính quy tawk “/…/%c” 
không hoạt động được trong gawk"
 
-#: awkgram.y:3093
+#: awkgram.y:3092
 #, c-format
 msgid "tawk regex modifier `/.../%c' doesn't work in gawk"
-msgstr ""
-"bộ sửa đổi biểu thức chính quy tawk “/.../%c” không hoạt 
động được trong gawk"
+msgstr "bộ sửa đổi biểu thức chính quy tawk “/…/%c” không 
hoạt động được trong gawk"
 
-#: awkgram.y:3100
+#: awkgram.y:3099
 msgid "unterminated regexp"
 msgstr "biểu thức chính quy chưa được chấm dứt"
 
-#: awkgram.y:3104
+#: awkgram.y:3103
 msgid "unterminated regexp at end of file"
 msgstr "biểu thức chính quy chưa được chấm dứt nằm tại kết 
thúc của tập tin"
 
-#: awkgram.y:3162
+#: awkgram.y:3161
 msgid "use of `\\ #...' line continuation is not portable"
-msgstr "không thể mang khả năng dùng “\\#...” để tiếp tục 
dòng"
+msgstr "không thể mang khả năng dùng “\\#…” để tiếp tục 
dòng"
 
-#: awkgram.y:3178
+#: awkgram.y:3177
 msgid "backslash not last character on line"
 msgstr "dấu gạch ngược không phải là ký tự cuối cùng nằm 
trên dòng"
 
-#: awkgram.y:3239
+#: awkgram.y:3238
 msgid "POSIX does not allow operator `**='"
 msgstr "POSIX không cho phép toán tử “**=”"
 
-#: awkgram.y:3241
+#: awkgram.y:3240
 msgid "old awk does not support operator `**='"
 msgstr "awk cũ không hỗ trợ toán tử “**=”"
 
-#: awkgram.y:3250
+#: awkgram.y:3249
 msgid "POSIX does not allow operator `**'"
 msgstr "POSIX không cho phép toán tử “**”"
 
-#: awkgram.y:3252
+#: awkgram.y:3251
 msgid "old awk does not support operator `**'"
 msgstr "awk cũ không hỗ trợ toán tử “**”"
 
-#: awkgram.y:3287
+#: awkgram.y:3286
 msgid "operator `^=' is not supported in old awk"
 msgstr "awk cũ không hỗ trợ toán tử “^=”"
 
-#: awkgram.y:3295
+#: awkgram.y:3294
 msgid "operator `^' is not supported in old awk"
 msgstr "awk cũ không hỗ trợ toán tử “^”"
 
-#: awkgram.y:3392 awkgram.y:3410 command.y:1180
+#: awkgram.y:3391 awkgram.y:3409 command.y:1180
 msgid "unterminated string"
 msgstr "chuỗi không được chấm dứt"
 
-#: awkgram.y:3631
+#: awkgram.y:3630
 #, c-format
 msgid "invalid char '%c' in expression"
 msgstr "có ký tự không hợp lệ “%c” nằm trong biểu thức"
 
-#: awkgram.y:3678
+#: awkgram.y:3677
 #, c-format
 msgid "`%s' is a gawk extension"
 msgstr "“%s” là một phần mở rộng gawk"
 
-#: awkgram.y:3683
+#: awkgram.y:3682
 #, c-format
 msgid "POSIX does not allow `%s'"
 msgstr "POSIX không cho phép “%s”"
 
-#: awkgram.y:3691
+#: awkgram.y:3690
 #, c-format
 msgid "`%s' is not supported in old awk"
 msgstr "awk kiểu cũ không hỗ trợ “%s”"
 
-#: awkgram.y:3781
+#: awkgram.y:3780
 msgid "`goto' considered harmful!\n"
 msgstr "“goto” được xem là có hại!\n"
 
-#: awkgram.y:3815
+#: awkgram.y:3814
 #, c-format
 msgid "%d is invalid as number of arguments for %s"
 msgstr "“%d” không hợp lệ khi là số đối số cho “%s”"
 
-#: awkgram.y:3850
+#: awkgram.y:3849
 #, c-format
 msgid "%s: string literal as last arg of substitute has no effect"
-msgstr ""
-"%s: khi đối số cuối cùng của sự thay thế, hằng mã nguồn 
chuỗi không có tác "
-"dụng"
+msgstr "%s: khi đối số cuối cùng của sự thay thế, hằng mã 
nguồn chuỗi không có tác dụng"
 
-#: awkgram.y:3855
+#: awkgram.y:3854
 #, c-format
 msgid "%s third parameter is not a changeable object"
 msgstr "tham số thứ ba %s không phải là một đối tượng có 
thể thay đổi"
 
-#: awkgram.y:3938 awkgram.y:3941
+#: awkgram.y:3937 awkgram.y:3940
 msgid "match: third argument is a gawk extension"
 msgstr "match: (khớp) đối số thứ ba là phần mở rộng gawk"
 
-#: awkgram.y:3995 awkgram.y:3998
+#: awkgram.y:3994 awkgram.y:3997
 msgid "close: second argument is a gawk extension"
 msgstr "close: (đóng) đối số thứ hai là phần mở rộng gawk"
 
-#: awkgram.y:4010
+#: awkgram.y:4009
 msgid "use of dcgettext(_\"...\") is incorrect: remove leading underscore"
-msgstr "dùng “dcgettext(_\"...\")” không đúng: hãy gỡ bỏ gạch 
dưới nằm trước"
+msgstr "dùng “dcgettext(_\"…\")” không đúng: hãy gỡ bỏ gạch 
dưới nằm trước"
 
-#: awkgram.y:4025
+#: awkgram.y:4024
 msgid "use of dcngettext(_\"...\") is incorrect: remove leading underscore"
-msgstr "dùng “dcgettext(_\"...\")” không đúng: hãy gỡ bỏ gạch 
dưới nằm trước"
+msgstr "dùng “dcgettext(_\"…\")” không đúng: hãy gỡ bỏ gạch 
dưới nằm trước"
 
-#: awkgram.y:4044
+#: awkgram.y:4043
 msgid "index: regexp constant as second argument is not allowed"
-msgstr ""
-"index: (chỉ mục) không cho phép hằng biểu thức chính quy làm 
đối số thứ hai"
+msgstr "index: (chỉ mục) không cho phép hằng biểu thức chính quy 
làm đối số thứ hai"
 
-#: awkgram.y:4097
+#: awkgram.y:4096
 #, c-format
 msgid "function `%s': parameter `%s' shadows global variable"
 msgstr "hàm “%s”: tham số “%s” che biến toàn cục"
 
-#: awkgram.y:4154 debug.c:4041 debug.c:4084 debug.c:5204
+#: awkgram.y:4153 debug.c:4041 debug.c:4084 debug.c:5204
 #, c-format
 msgid "could not open `%s' for writing (%s)"
 msgstr "không mở được “%s” để ghi (%s)"
 
-#: awkgram.y:4155
+#: awkgram.y:4154
 msgid "sending variable list to standard error"
 msgstr "đang gởi danh sách biến tới thiết bị lỗi chuẩn"
 
-#: awkgram.y:4163
+#: awkgram.y:4162
 #, c-format
 msgid "%s: close failed (%s)"
 msgstr "%s: gặp lỗi khi đóng (%s)"
 
-#: awkgram.y:4188
+#: awkgram.y:4187
 msgid "shadow_funcs() called twice!"
 msgstr "shadow_funcs() (hàm bóng) được gọi hai lần!"
 
-#: awkgram.y:4196
+#: awkgram.y:4195
 msgid "there were shadowed variables."
 msgstr "có biến bị bóng."
 
-#: awkgram.y:4267
+#: awkgram.y:4266
 #, c-format
 msgid "function name `%s' previously defined"
 msgstr "tên hàm “%s” trước đây đã được định nghĩa rồi"
 
-#: awkgram.y:4313
+#: awkgram.y:4312
 #, c-format
 msgid "function `%s': can't use function name as parameter name"
 msgstr "hàm “%s”: không thể dùng tên hàm như là tên tham số"
 
-#: awkgram.y:4316
+#: awkgram.y:4315
 #, c-format
 msgid "function `%s': can't use special variable `%s' as a function parameter"
 msgstr "hàm “%s”: không thể dùng biến đặc biệt “%s” như 
là tham số hàm"
 
-#: awkgram.y:4324
+#: awkgram.y:4323
 #, c-format
 msgid "function `%s': parameter #%d, `%s', duplicates parameter #%d"
 msgstr "hàm “%s”: tham số “#%d”, “%s”, nhân đôi tham số 
“#%d”"
 
-#: awkgram.y:4411 awkgram.y:4417
+#: awkgram.y:4410 awkgram.y:4416
 #, c-format
 msgid "function `%s' called but never defined"
 msgstr "hàm “%s” được gọi nhưng mà chưa định nghĩa"
 
-#: awkgram.y:4421
+#: awkgram.y:4420
 #, c-format
 msgid "function `%s' defined but never called directly"
 msgstr "hàm “%s” được định nghĩa nhưng mà chưa được gọi 
trực tiếp bao giờ"
 
-#: awkgram.y:4453
+#: awkgram.y:4452
 #, c-format
 msgid "regexp constant for parameter #%d yields boolean value"
 msgstr "hằng biểu thức chính quy cho tham số “#%d” làm giá 
trị luận lý (bun)"
 
-#: awkgram.y:4468
+#: awkgram.y:4467
 #, c-format
 msgid ""
 "function `%s' called with space between name and `(',\n"
@@ -530,21 +499,20 @@ msgstr ""
 "hàm “%s” được gọi với dấu cách nằm giữa tên và 
“(”\n"
 "hoặc được dùng như là biến hay mảng"
 
-#: awkgram.y:4674
+#: awkgram.y:4673
 msgid "division by zero attempted"
 msgstr "gặp phép chia cho số không"
 
-#: awkgram.y:4683
+#: awkgram.y:4682
 #, c-format
 msgid "division by zero attempted in `%%'"
 msgstr "gặp phép chia cho số không trong “%%”"
 
-#: awkgram.y:5003
-msgid ""
-"cannot assign a value to the result of a field post-increment expression"
+#: awkgram.y:5002
+msgid "cannot assign a value to the result of a field post-increment 
expression"
 msgstr "không thể gán giá trị cho kết quả của biểu thức 
trường tăng-trước"
 
-#: awkgram.y:5006
+#: awkgram.y:5005
 #, c-format
 msgid "invalid target of assignment (opcode %s)"
 msgstr "gán đich không hợp lệ (mã thi hành “%s”)"
@@ -570,22 +538,17 @@ msgstr "exp: đối số “%g” nằm ngoài phạm vi"
 #: builtin.c:229
 #, c-format
 msgid "fflush: cannot flush: pipe `%s' opened for reading, not writing"
-msgstr ""
-"fflush: không thể flush (đẩy dữ liệu lên đĩa): ống dẫn 
“%s” được mở để đọc, "
-"không phải để ghi"
+msgstr "fflush: không thể flush (đẩy dữ liệu lên đĩa): ống 
dẫn “%s” được mở để đọc, không phải để ghi"
 
 #: builtin.c:232
 #, c-format
 msgid "fflush: cannot flush: file `%s' opened for reading, not writing"
-msgstr ""
-"fflush: không thể flush (đẩy dữ liệu vào đĩa): tập tin 
“%s” được mở để đọc, "
-"không phải để ghi"
+msgstr "fflush: không thể flush (đẩy dữ liệu vào đĩa): tập tin 
“%s” được mở để đọc, không phải để ghi"
 
 #: builtin.c:244
 #, c-format
 msgid "fflush: `%s' is not an open file, pipe or co-process"
-msgstr ""
-"fflush: “%s” không phải là tập tin, ống dẫn hay đồng tiến 
trình được mở"
+msgstr "fflush: “%s” không phải là tập tin, ống dẫn hay đồng 
tiến trình được mở"
 
 #: builtin.c:351
 msgid "index: received non-string first argument"
@@ -650,8 +613,7 @@ msgstr "lỗi nghiêm trọng: số lượng đối số 
với “$” phải >0
 #: builtin.c:898
 #, c-format
 msgid "fatal: arg count %ld greater than total number of supplied arguments"
-msgstr ""
-"lỗi nghiêm trọng: số lượng đối số %ld lớn hơn tổng số 
đối số được cung cấp"
+msgstr "lỗi nghiêm trọng: số lượng đối số %ld lớn hơn tổng 
số đối số được cung cấp"
 
 #: builtin.c:902
 msgid "fatal: `$' not permitted after period in format"
@@ -659,9 +621,7 @@ msgstr "lỗi nghiêm trọng: không cho phép “$” 
nằm sau dấu chấm t
 
 #: builtin.c:921
 msgid "fatal: no `$' supplied for positional field width or precision"
-msgstr ""
-"lỗi nghiêm trọng: chưa cung cấp “$” cho độ rộng trường 
thuộc vị trí hay cho "
-"độ chính xác"
+msgstr "lỗi nghiêm trọng: chưa cung cấp “$” cho độ rộng 
trường thuộc vị trí hay cho độ chính xác"
 
 #: builtin.c:991
 msgid "`l' is meaningless in awk formats; ignored"
@@ -688,14 +648,14 @@ msgid "fatal: `h' is not permitted in POSIX awk formats"
 msgstr "lỗi nghiêm trọng: không cho phép chữ “h” nằm trong 
định dạng awk POSIX"
 
 #: builtin.c:1055
-#, fuzzy, c-format
+#, c-format
 msgid "[s]printf: value %g is too big for %%c format"
-msgstr "[s]printf: giá trị %g ở ngoại phạm vi cho dạng thức 
“%%%c”"
+msgstr "[s]printf: giá trị %g quá lớn cho định dạng “%%c”"
 
 #: builtin.c:1068
-#, fuzzy, c-format
+#, c-format
 msgid "[s]printf: value %g is not a valid wide character"
-msgstr "[s]printf: giá trị %g ở ngoại phạm vi cho dạng thức 
“%%%c”"
+msgstr "[s]printf: giá trị %g phải là một ký tự rộng hợp lệ"
 
 #: builtin.c:1454
 #, c-format
@@ -705,9 +665,7 @@ msgstr "[s]printf: giá trị %g ở ngoại phạm vi cho 
dạng thức “%%%c
 #: builtin.c:1552
 #, c-format
 msgid "ignoring unknown format specifier character `%c': no argument converted"
-msgstr ""
-"đang bỏ qua ký tự ghi rõ định dạng không rõ “%c”: không 
có đối số được "
-"chuyển đổi"
+msgstr "đang bỏ qua ký tự ghi rõ định dạng không rõ “%c”: 
không có đối số được chuyển đổi"
 
 #: builtin.c:1557
 msgid "fatal: not enough arguments to satisfy format string"
@@ -745,12 +703,12 @@ msgstr "sqrt: (căn bậc hai) đã gọi với đối 
số âm “%g”"
 #: builtin.c:1737
 #, c-format
 msgid "substr: length %g is not >= 1"
-msgstr "substr: (chuỗi con) độ dài %g không phải ≥1"
+msgstr "substr: (chuỗi con) độ dài %g không ≥1"
 
 #: builtin.c:1739
 #, c-format
 msgid "substr: length %g is not >= 0"
-msgstr "substr: (chuỗi con) độ dài %g không phải ≥0"
+msgstr "substr: (chuỗi con) độ dài %g không ≥0"
 
 #: builtin.c:1753
 #, c-format
@@ -760,9 +718,7 @@ msgstr "substr: (chuỗi con) sẽ cắt xén độ dài 
không phải số nguy
 #: builtin.c:1758
 #, c-format
 msgid "substr: length %g too big for string indexing, truncating to %g"
-msgstr ""
-"substr: (chuỗi con) độ dài %g là quá lớn cho chỉ số chuỗi, 
nên xén ngắn "
-"thành %g"
+msgstr "substr: (chuỗi con) độ dài %g là quá lớn cho chỉ số 
chuỗi, nên xén ngắn thành %g"
 
 #: builtin.c:1770
 #, c-format
@@ -772,8 +728,7 @@ msgstr "substr: (chuỗi con) chỉ số đầu “%g” 
không hợp lệ nên
 #: builtin.c:1775
 #, c-format
 msgid "substr: non-integer start index %g will be truncated"
-msgstr ""
-"substr: (chuỗi con) chỉ số đầu không phải số nguyên “%g” 
sẽ bị cắt ngắn"
+msgstr "substr: (chuỗi con) chỉ số đầu không phải số nguyên 
“%g” sẽ bị cắt ngắn"
 
 #: builtin.c:1798
 msgid "substr: source string is zero length"
@@ -786,16 +741,12 @@ msgstr "substr: (chuỗi con) chỉ số đầu %g nằm 
sau kết thúc của c
 
 #: builtin.c:1820
 #, c-format
-msgid ""
-"substr: length %g at start index %g exceeds length of first argument (%lu)"
-msgstr ""
-"substr: (chuỗi con) độ dài %g chỉ số đầu %g vượt quá độ 
dài của đối số đầu "
-"(%lu)"
+msgid "substr: length %g at start index %g exceeds length of first argument 
(%lu)"
+msgstr "substr: (chuỗi con) độ dài %g chỉ số đầu %g vượt quá 
độ dài của đối số đầu (%lu)"
 
 #: builtin.c:1890
 msgid "strftime: format value in PROCINFO[\"strftime\"] has numeric type"
-msgstr ""
-"strftime: giá trị định dạng trong PROCINFO[”strftime”] phải 
thuộc kiểu số"
+msgstr "strftime: giá trị định dạng trong PROCINFO[\"strftime\"] 
phải thuộc kiểu số"
 
 #: builtin.c:1913
 msgid "strftime: received non-numeric second argument"
@@ -836,11 +787,11 @@ msgstr "gặp tham chiếu đến trường chưa 
được khởi tạo “$%d
 
 #: builtin.c:2259
 msgid "tolower: received non-string argument"
-msgstr "tolower: (đến thấp hơn) đã nhận đối số khác chuỗi"
+msgstr "tolower: (thành chư thường) đã nhận đối số khác chuỗi"
 
 #: builtin.c:2290
 msgid "toupper: received non-string argument"
-msgstr "toupper: (đến cao hơn) đã nhận đối số khác chuỗi"
+msgstr "toupper: (thành chữ HOA) đã nhận đối số khác chuỗi"
 
 #: builtin.c:2323 mpfr.c:679
 msgid "atan2: received non-numeric first argument"
@@ -852,137 +803,143 @@ msgstr "atan2: đã nhận đối số thứ hai khác 
thuộc số"
 
 #: builtin.c:2344
 msgid "sin: received non-numeric argument"
-msgstr "sin: đã nhận đối số không phải thuộc số"
+msgstr "sin: đã nhận đối số không thuộc kiểu số học"
 
 #: builtin.c:2360
 msgid "cos: received non-numeric argument"
-msgstr "cos: đã nhận đối số không phải thuộc số"
+msgstr "cos: đã nhận đối số không thuộc kiểu số học"
 
 #: builtin.c:2413 mpfr.c:1176
 msgid "srand: received non-numeric argument"
-msgstr "srand: đã nhận đối số không phải thuộc số"
+msgstr "srand: đã nhận đối số không thuộc kiểu số học"
 
 #: builtin.c:2444
 msgid "match: third argument is not an array"
 msgstr "match: (khớp) đối số thứ ba không phải là mảng"
 
 #: builtin.c:2705
-#, fuzzy, c-format
+#, c-format
 msgid "gensub: third argument `%.*s' treated as 1"
-msgstr "gensub: đối số thứ ba của 0 được xử lý như 1"
+msgstr "gensub: đối số thứ ba “%.*s” được xử lý như 1"
 
 #: builtin.c:2720
-#, fuzzy, c-format
+#, c-format
 msgid "gensub: third argument %g treated as 1"
-msgstr "gensub: đối số thứ ba của 0 được xử lý như 1"
+msgstr "gensub: đối số thứ ba %g được xử lý như 1"
+
+#: builtin.c:3018
+#, c-format
+msgid "%s: can be called indirectly only with two arguments"
+msgstr "%s: được gọi một cách gián tiếp với ít hơn hai đối 
số"
 
-#: builtin.c:3020
+#: builtin.c:3108
+#, c-format
+msgid "indirect call to %s requires at least two arguments"
+msgstr "cú gọi gián tiếp đến %s cần ít nhất hai đối số"
+
+#: builtin.c:3160
 msgid "lshift: received non-numeric first argument"
 msgstr "lshift: đã nhận đối số đầu không phải thuộc số"
 
-#: builtin.c:3022
+#: builtin.c:3162
 msgid "lshift: received non-numeric second argument"
 msgstr "lshift: (dịch bên trái) đã nhận đối số thứ hai khác 
thuộc số"
 
-#: builtin.c:3028
+#: builtin.c:3168
 #, c-format
 msgid "lshift(%f, %f): negative values will give strange results"
 msgstr "lshift(%f, %f): giá trị âm sẽ gây ra kết quả không như 
mong muốn"
 
-#: builtin.c:3030
+#: builtin.c:3170
 #, c-format
 msgid "lshift(%f, %f): fractional values will be truncated"
 msgstr "lshift(%f, %f): giá trị thuộc phân số sẽ bị cắt ngắn"
 
-#: builtin.c:3032
+#: builtin.c:3172
 #, c-format
 msgid "lshift(%f, %f): too large shift value will give strange results"
-msgstr ""
-"lshift(%f, %f): giá trị dịch quá lớn sẽ gây ra kết quả không 
như mong muốn"
+msgstr "lshift(%f, %f): giá trị dịch quá lớn sẽ gây ra kết quả 
không như mong muốn"
 
-#: builtin.c:3057
+#: builtin.c:3197
 msgid "rshift: received non-numeric first argument"
 msgstr "rshift: đã nhận đối số thứ nhất khác thuộc số"
 
-#: builtin.c:3059
+#: builtin.c:3199
 msgid "rshift: received non-numeric second argument"
 msgstr "rshift: (dịch phải) đã nhận đối số thứ hai khác 
thuộc số"
 
-#: builtin.c:3065
+#: builtin.c:3205
 #, c-format
 msgid "rshift(%f, %f): negative values will give strange results"
 msgstr "rshift(%f, %f): giá trị âm sẽ gây ra kết quả không như 
mong muốn"
 
-#: builtin.c:3067
+#: builtin.c:3207
 #, c-format
 msgid "rshift(%f, %f): fractional values will be truncated"
 msgstr "rshift(%f, %f): giá trị thuộc kiểu phân số sẽ bị xén 
ngắn"
 
-#: builtin.c:3069
+#: builtin.c:3209
 #, c-format
 msgid "rshift(%f, %f): too large shift value will give strange results"
-msgstr ""
-"rshift(%f, %f): giá trị dịch quá lớn sẽ gây ra kết quả không 
như mong muốn"
+msgstr "rshift(%f, %f): giá trị dịch quá lớn sẽ gây ra kết quả 
không như mong muốn"
 
-#: builtin.c:3094 mpfr.c:988
+#: builtin.c:3234 mpfr.c:988
 msgid "and: called with less than two arguments"
 msgstr "and: được gọi với ít hơn hai đối số"
 
-#: builtin.c:3099
+#: builtin.c:3239
 #, c-format
 msgid "and: argument %d is non-numeric"
-msgstr "and: đối số  %d không phải thuộc số"
+msgstr "and: đối số %d không phải thuộc số"
 
-#: builtin.c:3103
+#: builtin.c:3243
 #, c-format
 msgid "and: argument %d negative value %g will give strange results"
-msgstr ""
-"and: (và) đối số %d giá trị âm %g sẽ đưa lại kết quả 
không như mong muốn"
+msgstr "and: (và) đối số %d giá trị âm %g sẽ đưa lại kết 
quả không như mong muốn"
 
-#: builtin.c:3126 mpfr.c:1020
+#: builtin.c:3266 mpfr.c:1020
 msgid "or: called with less than two arguments"
 msgstr "or: (hoặc) được gọi với ít hơn hai đối số"
 
-#: builtin.c:3131
+#: builtin.c:3271
 #, c-format
 msgid "or: argument %d is non-numeric"
 msgstr "or: (hoặc) đối số %d không thuộc kiểu số"
 
-#: builtin.c:3135
+#: builtin.c:3275
 #, c-format
 msgid "or: argument %d negative value %g will give strange results"
-msgstr ""
-"or: (hoặc) đối số %d giá trị âm %g sẽ đưa lại kết quả 
không như mong muốn"
+msgstr "or: (hoặc) đối số %d giá trị âm %g sẽ đưa lại kết 
quả không như mong muốn"
 
-#: builtin.c:3157 mpfr.c:1051
+#: builtin.c:3297 mpfr.c:1051
 msgid "xor: called with less than two arguments"
 msgstr "xor: được gọi với ít hơn hai đối số"
 
-#: builtin.c:3163
+#: builtin.c:3303
 #, c-format
 msgid "xor: argument %d is non-numeric"
 msgstr "xor: đối số %d không thuộc kiểu số"
 
-#: builtin.c:3167
+#: builtin.c:3307
 #, c-format
 msgid "xor: argument %d negative value %g will give strange results"
 msgstr "xor: đối số %d giá trị âm %g sẽ đưa lại kết quả 
không như mong muốn"
 
-#: builtin.c:3192 mpfr.c:807
+#: builtin.c:3332 mpfr.c:807
 msgid "compl: received non-numeric argument"
 msgstr "compl: (biên dịch) đã nhận được đối số 
không-phải-số"
 
-#: builtin.c:3198
+#: builtin.c:3338
 #, c-format
 msgid "compl(%f): negative value will give strange results"
 msgstr "compl(%f): giá trị âm sẽ gây ra kết quả không như mong 
đợi"
 
-#: builtin.c:3200
+#: builtin.c:3340
 #, c-format
 msgid "compl(%f): fractional value will be truncated"
 msgstr "compl(%f): giá trị thuộc phân số sẽ bị cắt ngắn"
 
-#: builtin.c:3369
+#: builtin.c:3509
 #, c-format
 msgid "dcgettext: `%s' is not a valid locale category"
 msgstr "dcgettext: “%s” không phải là một phân loại miền địa 
phương hợp lệ"
@@ -1088,35 +1045,24 @@ msgid "non-zero integer value"
 msgstr "giá trị số nguyên khác không"
 
 #: command.y:817
-msgid ""
-"backtrace [N] - print trace of all or N innermost (outermost if N < 0) "
-"frames."
-msgstr ""
-"backtrace [N] - in vết của tất cả hay N khung trong cùng nhất 
(ngoài cùng "
-"nhất nếu N < 0)."
+msgid "backtrace [N] - print trace of all or N innermost (outermost if N < 0) 
frames."
+msgstr "backtrace [N] - in vết của tất cả hay N khung trong cùng 
nhất (ngoài cùng nhất nếu N < 0)."
 
 #: command.y:819
-msgid ""
-"break [[filename:]N|function] - set breakpoint at the specified location."
+msgid "break [[filename:]N|function] - set breakpoint at the specified 
location."
 msgstr "break [[tên_tập_tin:]N|hàm] - đặt điểm ngắt tại vị 
trí đã cho."
 
 #: command.y:821
 msgid "clear [[filename:]N|function] - delete breakpoints previously set."
-msgstr ""
-"clear [[tên_tập_tin:]N|function] - xóa các điểm ngắt được 
đặt trước đây."
+msgstr "clear [[tên_tập_tin:]N|function] - xóa các điểm ngắt 
được đặt trước đây."
 
 #: command.y:823
-msgid ""
-"commands [num] - starts a list of commands to be executed at a "
-"breakpoint(watchpoint) hit."
-msgstr ""
-"commands [số] - chạy một danh sách các câu lệnh được thực 
thi tại điểm ngắt "
-"(hay điểm theo dõi) tìm được."
+msgid "commands [num] - starts a list of commands to be executed at a 
breakpoint(watchpoint) hit."
+msgstr "commands [số] - chạy một danh sách các câu lệnh được 
thực thi tại điểm ngắt (hay điểm theo dõi) tìm được."
 
 #: command.y:825
 msgid "condition num [expr] - set or clear breakpoint or watchpoint condition."
-msgstr ""
-"condition num [expr] - đặt hay xóa điểm ngắt hay điều kiện 
điểm theo dõi."
+msgstr "condition num [expr] - đặt hay xóa điểm ngắt hay điều 
kiện điểm theo dõi."
 
 #: command.y:827
 msgid "continue [COUNT] - continue program being debugged."
@@ -1140,8 +1086,7 @@ msgstr "down [N] - chuyển xuống N khung stack."
 
 #: command.y:837
 msgid "dump [filename] - dump instructions to file or stdout."
-msgstr ""
-"dump [tên_tập_tin] - dump các chỉ lệnh ra tập tin hay đầu ra 
tiêu chuẩn."
+msgstr "dump [tên_tập_tin] - dump các chỉ lệnh ra tập tin hay đầu 
ra tiêu chuẩn."
 
 #: command.y:839
 msgid "enable [once|del] [breakpoints] [range] - enable specified breakpoints."
@@ -1153,7 +1098,7 @@ msgstr "end - kết thúc một danh sách các câu 
lệnh hay biểu thức aw
 
 #: command.y:843
 msgid "eval stmt|[p1, p2, ...] - evaluate awk statement(s)."
-msgstr "eval stmt|[p1, p2, ...] - định giá các câu lệnh awk."
+msgstr "eval stmt|[p1, p2, …] - định giá các câu lệnh awk."
 
 #: command.y:845
 msgid "finish - execute until selected stack frame returns."
@@ -1172,11 +1117,8 @@ msgid "ignore N COUNT - set ignore-count of breakpoint 
number N to COUNT."
 msgstr "ignore N SỐ-LƯỢNG - đặt số lượng điểm ngắt bị bỏ 
qua."
 
 #: command.y:853
-msgid ""
-"info topic - source|sources|variables|functions|break|frame|args|locals|"
-"display|watch."
-msgstr ""
-"info chủ_đề - nguồn|nguồn|biến|hà
m|break|frame|args|locals|display|watch."
+msgid "info topic - 
source|sources|variables|functions|break|frame|args|locals|display|watch."
+msgstr "info chủ_đề - nguồn|nguồn|biến|hà
m|break|frame|args|locals|display|watch."
 
 #: command.y:855
 msgid "list [-|+|[filename:]lineno|function|range] - list specified line(s)."
@@ -1184,16 +1126,11 @@ msgstr "list [-|+|[tập_tin:]số_dòng|hàm|vùng] - 
liệt kê các dòng đ
 
 #: command.y:857
 msgid "next [COUNT] - step program, proceeding through subroutine calls."
-msgstr ""
-"next [SỐ_LƯỢNG]   - nhảy một chỉ lệnh, nhưng được xử lý 
thông qua gọi thủ "
-"tục con."
+msgstr "next [SỐ_LƯỢNG] - nhảy một chỉ lệnh, nhưng được xử 
lý thông qua gọi thủ tục con."
 
 #: command.y:859
-msgid ""
-"nexti [COUNT] - step one instruction, but proceed through subroutine calls."
-msgstr ""
-"nexti [SỐ_LƯỢNG]  - nhảy từng chỉ lệnh, nhưng được xử lý 
thông qua gọi thủ "
-"tục con."
+msgid "nexti [COUNT] - step one instruction, but proceed through subroutine 
calls."
+msgstr "nexti [SỐ_LƯỢNG] - nhảy từng chỉ lệnh, nhưng được 
xử lý thông qua gọi thủ tục con."
 
 #: command.y:861
 msgid "option [name[=value]] - set or display debugger option(s)."
@@ -1205,7 +1142,7 @@ msgstr "print var [var] - in giá trị của biến hay 
mảng."
 
 #: command.y:865
 msgid "printf format, [arg], ... - formatted output."
-msgstr "printf format, [arg], ... - kết xuất có định dạng."
+msgstr "printf format, [arg], … - kết xuất có định dạng."
 
 #: command.y:867
 msgid "quit - exit debugger."
@@ -1213,9 +1150,7 @@ msgstr "quit - thoát khỏi chương trình gỡ lỗi."
 
 #: command.y:869
 msgid "return [value] - make selected stack frame return to its caller."
-msgstr ""
-"return [giá-trị] - làm cho khung stack đã chọn trả về giá trị 
này cho bộ gọi "
-"nó."
+msgstr "return [giá-trị] - làm cho khung stack đã chọn trả về giá 
trị này cho bộ gọi nó."
 
 #: command.y:871
 msgid "run - start or restart executing program."
@@ -1230,11 +1165,8 @@ msgid "set var = value - assign value to a scalar 
variable."
 msgstr "set biến = giá_trị - gán giá trị cho một biến vô 
hướng."
 
 #: command.y:879
-msgid ""
-"silent - suspends usual message when stopped at a breakpoint/watchpoint."
-msgstr ""
-"silent - chặn các lời nhắn thông thường khi dừng tại điểm 
ngăt hay điểm theo "
-"dõi."
+msgid "silent - suspends usual message when stopped at a 
breakpoint/watchpoint."
+msgstr "silent - chặn các lời nhắn thông thường khi dừng tại 
điểm ngăt hay điểm theo dõi."
 
 #: command.y:881
 msgid "source file - execute commands from file."
@@ -1242,9 +1174,7 @@ msgstr "source file - thực hiện các câu lệnh từ 
tập tin."
 
 #: command.y:883
 msgid "step [COUNT] - step program until it reaches a different source line."
-msgstr ""
-"step [SỐ_LƯỢNG] - chạy từng bước chương trình cho đến khi 
nó gặp một dòng "
-"nguồn khác."
+msgstr "step [SỐ_LƯỢNG] - chạy từng bước chương trình cho 
đến khi nó gặp một dòng nguồn khác."
 
 #: command.y:885
 msgid "stepi [COUNT] - step one instruction exactly."
@@ -1263,12 +1193,8 @@ msgid "undisplay [N] - remove variable(s) from automatic 
display list."
 msgstr "undisplay [N] - gỡ bỏ các biến từ danh sách hiển thị 
tự động."
 
 #: command.y:893
-msgid ""
-"until [[filename:]N|function] - execute until program reaches a different "
-"line or line N within current frame."
-msgstr ""
-"until [[tên_tập_tin:]N|hàm] - thực hiện cho đến khi chương 
trình đạt đến "
-"dòng khác hay dòng N trong khung hiện tại."
+msgid "until [[filename:]N|function] - execute until program reaches a 
different line or line N within current frame."
+msgstr "until [[tên_tập_tin:]N|hàm] - thực hiện cho đến khi 
chương trình đạt đến dòng khác hay dòng N trong khung hiện tại."
 
 #: command.y:895
 msgid "unwatch [N] - remove variable(s) from watch list."
@@ -1283,13 +1209,8 @@ msgid "watch var - set a watchpoint for a variable."
 msgstr "watch var - đặt điểm theo dõi cho một biến."
 
 #: command.y:901
-#, fuzzy
-msgid ""
-"where [N] - (same as backtrace) print trace of all or N innermost (outermost "
-"if N < 0) frames."
-msgstr ""
-"backtrace [N] - in vết của tất cả hay N khung trong cùng nhất 
(ngoài cùng "
-"nhất nếu N < 0)."
+msgid "where [N] - (same as backtrace) print trace of all or N innermost 
(outermost if N < 0) frames."
+msgstr "where [N] - (giống như backtrace) in vết của tất cả hay N 
khung trong cùng nhất (ngoài cùng nhất nếu N < 0)."
 
 #: command.y:1013 debug.c:401 msg.c:135
 #, c-format
@@ -1604,7 +1525,7 @@ msgstr "#%ld\ttrong "
 #: debug.c:1974
 #, c-format
 msgid "More stack frames follow ...\n"
-msgstr "Nhiều khung ngăn xếp theo sau...\n"
+msgstr "Nhiều khung ngăn xếp theo sau …\n"
 
 #: debug.c:2017
 msgid "invalid frame number"
@@ -1613,9 +1534,7 @@ msgstr "số khung không hợp lệ"
 #: debug.c:2200
 #, c-format
 msgid "Note: breakpoint %d (enabled, ignore next %ld hits), also set at %s:%d"
-msgstr ""
-"Chú ý: điểm ngắt %d (được bật, bỏ qua %ld gợi ý tiếp), 
đồng thời được đặt "
-"tại %s:%d"
+msgstr "Chú ý: điểm ngắt %d (được bật, bỏ qua %ld gợi ý 
tiếp), đồng thời được đặt tại %s:%d"
 
 #: debug.c:2207
 #, c-format
@@ -1625,9 +1544,7 @@ msgstr "Chú ý: điểm ngắt %d (được bật), 
đồng thời được đ
 #: debug.c:2214
 #, c-format
 msgid "Note: breakpoint %d (disabled, ignore next %ld hits), also set at %s:%d"
-msgstr ""
-"Chú ý: điểm ngắt %d (bị tắt, bỏ qua %ld gợi ý tiếp), 
đồng thời được đặt tại "
-"%s:%d"
+msgstr "Chú ý: điểm ngắt %d (bị tắt, bỏ qua %ld gợi ý tiếp), 
đồng thời được đặt tại %s:%d"
 
 #: debug.c:2221
 #, c-format
@@ -1709,8 +1626,7 @@ msgstr "Sẽ dừng lần gặp điểm ngắt %d tiếp 
theo.\n"
 #: debug.c:2783
 #, c-format
 msgid "Can only debug programs provided with the `-f' option.\n"
-msgstr ""
-"Chỉ có thể gỡ lỗi các chương trình được cung cấp cùng 
với tùy chọn “-f”.\n"
+msgstr "Chỉ có thể gỡ lỗi các chương trình được cung cấp 
cùng với tùy chọn “-f”.\n"
 
 #: debug.c:2908
 #, c-format
@@ -1748,7 +1664,7 @@ msgstr "Chương trình %s được thoát ra với mã 
thoát là: %d\n"
 
 #: debug.c:2975
 msgid "The program is running. Exit anyway (y/n)? "
-msgstr "Chương trình này đang chạy. Vẫn thoát (c/không)?"
+msgstr "Chương trình này đang chạy. Vẫn thoát (c/k)?"
 
 #: debug.c:3010
 #, c-format
@@ -1773,7 +1689,7 @@ msgstr "“finish” không có nghĩa trong khung ngoài 
cùng nhất main()\n"
 #: debug.c:3212
 #, c-format
 msgid "Run till return from "
-msgstr "Chạy cho đến khi có trả về từ đó"
+msgstr "Chạy cho đến khi có trả về từ "
 
 #: debug.c:3255
 #, c-format
@@ -1808,7 +1724,7 @@ msgstr "biến chưa định kiểu\n"
 #: debug.c:3466
 #, c-format
 msgid "Stopping in %s ...\n"
-msgstr "Dừng trong %s ...\n"
+msgstr "Dừng trong %s …\n"
 
 #: debug.c:3543
 #, c-format
@@ -1822,7 +1738,7 @@ msgstr "“until” không có nghĩa với cú nhảy 
non-local “%s”\n"
 
 #: debug.c:4185
 msgid "\t------[Enter] to continue or q [Enter] to quit------"
-msgstr "\t-Nhấn [Enter] để tiếp tục hay  “q” [Enter] để 
thoát------"
+msgstr "\t------Nhấn [Enter] để tiếp tục hay t [Enter] để 
thoát------"
 
 #: debug.c:4186
 msgid "q"
@@ -1874,14 +1790,12 @@ msgid "unfinished \\ escape"
 msgstr "chưa kết thúc dãy thoát \\"
 
 #: dfa.c:1474
-#, fuzzy
 msgid "invalid content of \\{\\}"
-msgstr "Nội dung của “\\{\\}” không hợp lệ"
+msgstr "nội dung của “\\{\\}” không hợp lệ"
 
 #: dfa.c:1477
-#, fuzzy
 msgid "regular expression too big"
-msgstr "Biểu thức chính quy quá lớn"
+msgstr "biểu thức chính quy quá lớn"
 
 #: dfa.c:1912
 msgid "unbalanced ("
@@ -1908,7 +1822,7 @@ msgstr "gặp opcode (mã thao tác) không rõ %d"
 #: eval.c:418
 #, c-format
 msgid "opcode %s not an operator or keyword"
-msgstr "mã lệnh %s không phải là một toán tử hoặc từ khoá"
+msgstr "mã lệnh %s không phải là một toán tử hoặc từ khóa"
 
 #: eval.c:474
 msgid "buffer overflow in genflags2str"
@@ -2013,10 +1927,8 @@ msgstr "load_ext: không thể mở thư viện “%s” 
(%s)\n"
 
 #: ext.c:80
 #, c-format
-msgid ""
-"load_ext: library `%s': does not define `plugin_is_GPL_compatible' (%s)\n"
-msgstr ""
-"load_ext: thư viện “%s”: chưa định nghĩa 
“plugin_is_GPL_compatible” (%s)\n"
+msgid "load_ext: library `%s': does not define `plugin_is_GPL_compatible' 
(%s)\n"
+msgstr "load_ext: thư viện “%s”: chưa định nghĩa 
“plugin_is_GPL_compatible” (%s)\n"
 
 #: ext.c:86
 #, c-format
@@ -2034,7 +1946,7 @@ msgstr "“extension” là một phần mở rộng gawk"
 
 #: ext.c:153
 msgid "extension: received NULL lib_name"
-msgstr "extension: nhận được NULL lib_name"
+msgstr "extension: nhận được tên_thư_viện NULL"
 
 #: ext.c:156
 #, c-format
@@ -2043,10 +1955,8 @@ msgstr "phần mở rộng: không thể mở thư 
viện “%s” (%s)"
 
 #: ext.c:162
 #, c-format
-msgid ""
-"extension: library `%s': does not define `plugin_is_GPL_compatible' (%s)"
-msgstr ""
-"phần mở rộng: thư viện “%s”: chưa định nghĩa 
“plugin_is_GPL_compatible” (%s)"
+msgid "extension: library `%s': does not define `plugin_is_GPL_compatible' 
(%s)"
+msgstr "phần mở rộng: thư viện “%s”: chưa định nghĩa 
“plugin_is_GPL_compatible” (%s)"
 
 #: ext.c:166
 #, c-format
@@ -2075,9 +1985,7 @@ msgstr "make_builtin: hàm “%s” đã được định 
nghĩa trước đây
 #: ext.c:222
 #, c-format
 msgid "make_builtin: can't use gawk built-in `%s' as function name"
-msgstr ""
-"make_builtin: không thể sử dụng “%s” như là một hàm được 
xây dựng sẵn trong "
-"gawk"
+msgstr "make_builtin: không thể sử dụng “%s” như là một hàm 
được xây dựng sẵn trong gawk"
 
 #: ext.c:225 ext.c:280
 #, c-format
@@ -2111,14 +2019,12 @@ msgstr "tên hàm “%s” đã được định nghĩa 
trước đó"
 #: ext.c:277
 #, c-format
 msgid "extension: can't use gawk built-in `%s' as function name"
-msgstr ""
-"extension: (phần mở rộng) không thể dùng điều có sẵn của 
gawk “%s” như là "
-"tên hàm"
+msgstr "extension: (phần mở rộng) không thể dùng điều có sẵn 
của gawk “%s” như là tên hàm"
 
 #: ext.c:351
 #, c-format
 msgid "function `%s' defined to take no more than %d argument(s)"
-msgstr "hàm “%s” được định nghĩa để chấp nhấn %d đối 
số tối đa"
+msgstr "hàm “%s” được định nghĩa để chấp nhận tối đa %d 
đối số"
 
 #: ext.c:354
 #, c-format
@@ -2400,7 +2306,7 @@ msgstr "readfile: được gọi mà không có đối 
số"
 
 #: extension/revoutput.c:125
 msgid "revoutput: could not initialize REVOUT variable"
-msgstr ""
+msgstr "revoutput: không thể khởi tạo biến REVOUT"
 
 #: extension/rwarray.c:124 extension/rwarray0.c:109
 msgid "writea: called with too many arguments"
@@ -2492,26 +2398,19 @@ msgstr "split: (chia tách) đối số thứ hai 
không phải là mảng"
 
 #: field.c:980
 msgid "split: cannot use the same array for second and fourth args"
-msgstr ""
-"split (chia tách): không thể sử dụng cùng một mảng có cả 
đối số thứ hai và "
-"thứ tư"
+msgstr "split (chia tách): không thể sử dụng cùng một mảng có 
cả đối số thứ hai và thứ tư"
 
 #: field.c:985
 msgid "split: cannot use a subarray of second arg for fourth arg"
-msgstr ""
-"split (phân tách): không thể sử dụng mảng con của tham số 
thứ hai cho tham "
-"số thứ tư"
+msgstr "split (phân tách): không thể sử dụng mảng con của tham 
số thứ hai cho tham số thứ tư"
 
 #: field.c:988
 msgid "split: cannot use a subarray of fourth arg for second arg"
-msgstr ""
-"split (phân tách): không thể sử dụng mảng con của tham số 
thứ tư cho tham số "
-"thứ hai"
+msgstr "split (phân tách): không thể sử dụng mảng con của tham 
số thứ tư cho tham số thứ hai"
 
 #: field.c:1019
 msgid "split: null string for third arg is a gawk extension"
-msgstr ""
-"split: (chia tách) chuỗi vô giá trị cho đối số thứ ba là 
phần mở rộng gawk"
+msgstr "split: (chia tách) chuỗi vô giá trị cho đối số thứ ba là
 phần mở rộng gawk"
 
 #: field.c:1059
 msgid "patsplit: fourth argument is not an array"
@@ -2527,21 +2426,15 @@ msgstr "patsplit: đối số thứ ba không phải 
không rỗng"
 
 #: field.c:1074
 msgid "patsplit: cannot use the same array for second and fourth args"
-msgstr ""
-"patsplit (chương trình chia tách): không thể sử dụng cùng một 
mảng cho cả "
-"hai đối số thứ hai và thứ tư"
+msgstr "patsplit (chương trình chia tách): không thể sử dụng cùng 
một mảng cho cả hai đối số thứ hai và thứ tư"
 
 #: field.c:1079
 msgid "patsplit: cannot use a subarray of second arg for fourth arg"
-msgstr ""
-"patsplit (chương trình phân tách): không thể sử dụng mảng con 
của tham số "
-"thứ hai cho tham số thứ tư"
+msgstr "patsplit (chương trình phân tách): không thể sử dụng 
mảng con của tham số thứ hai cho tham số thứ tư"
 
 #: field.c:1082
 msgid "patsplit: cannot use a subarray of fourth arg for second arg"
-msgstr ""
-"patsplit (chương trình phân tách): không thể sử dụng mảng con 
của tham số "
-"thứ tư cho tham số thứ hai"
+msgstr "patsplit (chương trình phân tách): không thể sử dụng 
mảng con của tham số thứ tư cho tham số thứ hai"
 
 #: field.c:1120
 msgid "`FIELDWIDTHS' is a gawk extension"
@@ -2681,9 +2574,7 @@ msgstr "biểu thức cho điều chuyển hướng 
“%s” có giá trị chu
 #: io.c:794
 #, c-format
 msgid "filename `%s' for `%s' redirection may be result of logical expression"
-msgstr ""
-"tên tập tin “%s” cho điều chuyển hướng “%s” có lẽ là 
kết quả của biểu thức "
-"luận lý"
+msgstr "tên tập tin “%s” cho điều chuyển hướng “%s” có 
lẽ là kết quả của biểu thức luận lý"
 
 #: io.c:842
 #, c-format
@@ -2716,11 +2607,8 @@ msgid "can't redirect to `%s' (%s)"
 msgstr "không thể chuyển hướng đến “%s” (%s)"
 
 #: io.c:1073
-msgid ""
-"reached system limit for open files: starting to multiplex file descriptors"
-msgstr ""
-"đã tới giới hạn hệ thống về tập tin được mở nên bắt 
đầu phối hợp nhiều dòng "
-"điều mô tả tập tin"
+msgid "reached system limit for open files: starting to multiplex file 
descriptors"
+msgstr "đã tới giới hạn hệ thống về tập tin được mở nên 
bắt đầu phối hợp nhiều dòng điều mô tả tập tin"
 
 #: io.c:1089
 #, c-format
@@ -2738,9 +2626,7 @@ msgstr "close: (đóng) đối số thứ hai phải là 
“to” (đến) hay 
 #: io.c:1136
 #, c-format
 msgid "close: `%.*s' is not an open file, pipe or co-process"
-msgstr ""
-"close: (đóng) “%.*s” không phải là tập tin, ống dẫn hay 
đồng tiến trình đã "
-"được mở"
+msgstr "close: (đóng) “%.*s” không phải là tập tin, ống dẫn 
hay đồng tiến trình đã được mở"
 
 #: io.c:1141
 msgid "close of redirection that was never opened"
@@ -2749,8 +2635,7 @@ msgstr "đóng một chuyển hướng mà nó chưa 
từng được mở"
 #: io.c:1238
 #, c-format
 msgid "close: redirection `%s' not opened with `|&', second argument ignored"
-msgstr ""
-"close: chuyển hướng “%s” không được mở bởi “|&” nên 
đối số thứ hai bị bỏ qua"
+msgstr "close: chuyển hướng “%s” không được mở bởi “|&” 
nên đối số thứ hai bị bỏ qua"
 
 #: io.c:1255
 #, c-format
@@ -2795,17 +2680,17 @@ msgstr "gặp lỗi khi ghi thiết bị lỗi chuẩn 
(%s)"
 #: io.c:1330
 #, c-format
 msgid "pipe flush of `%s' failed (%s)."
-msgstr "lỗi xoá sạch ống dẫn “%s” (%s)"
+msgstr "lỗi xóa sạch ống dẫn “%s” (%s)"
 
 #: io.c:1333
 #, c-format
 msgid "co-process flush of pipe to `%s' failed (%s)."
-msgstr "lỗi xoá sạch ống dẫn đồng tiến trình đến “%s” 
(%s)"
+msgstr "lỗi xóa sạch ống dẫn đồng tiến trình đến “%s” 
(%s)"
 
 #: io.c:1336
 #, c-format
 msgid "file flush of `%s' failed (%s)."
-msgstr "lỗi xoá sạch tập tin “%s” (%s)"
+msgstr "lỗi xóa sạch tập tin “%s” (%s)"
 
 #: io.c:1453
 #, c-format
@@ -2839,9 +2724,7 @@ msgstr "lỗi đóng đầu ra tiêu chuẩn trong tiến 
trình con (%s)"
 #: io.c:1909
 #, c-format
 msgid "moving slave pty to stdout in child failed (dup: %s)"
-msgstr ""
-"gặp lỗi khi di chuyển pty (thiết bị cuối giả) phụ thuộc 
đến thiết bị đầu ra "
-"tiêu chuẩn trong con (trùng: %s)"
+msgstr "gặp lỗi khi di chuyển pty (thiết bị cuối giả) phụ 
thuộc đến thiết bị đầu ra tiêu chuẩn trong con (trùng: %s)"
 
 #: io.c:1911 io.c:2097
 #, c-format
@@ -2851,9 +2734,7 @@ msgstr "lỗi đóng thiết bị nhập chuẩn trong 
tiến trình con (%s)"
 #: io.c:1914
 #, c-format
 msgid "moving slave pty to stdin in child failed (dup: %s)"
-msgstr ""
-"lỗi di chuyển pty (thiết bị cuối giả) phụ tới thiết bị 
nhập chuẩn trong điều "
-"con (nhân đôi: %s)"
+msgstr "lỗi di chuyển pty (thiết bị cuối giả) phụ tới thiết 
bị nhập chuẩn trong điều con (nhân đôi: %s)"
 
 #: io.c:1916 io.c:1938
 #, c-format
@@ -2863,16 +2744,12 @@ msgstr "đóng pty (thiết bị cuối giả) phụ 
thuộc gặp lỗi (%s)"
 #: io.c:2027 io.c:2095 io.c:2264 io.c:2296
 #, c-format
 msgid "moving pipe to stdout in child failed (dup: %s)"
-msgstr ""
-"lỗi di chuyển ống dẫn đến thiết bị xuất chuẩn trong tiến 
trình con (trùng: "
-"%s)"
+msgstr "lỗi di chuyển ống dẫn đến thiết bị xuất chuẩn trong 
tiến trình con (trùng: %s)"
 
 #: io.c:2034 io.c:2100
 #, c-format
 msgid "moving pipe to stdin in child failed (dup: %s)"
-msgstr ""
-"lỗi di chuyển ống dẫn đến thiết bị nhập chuẩn trong tiến 
trình con (trùng: "
-"%s)"
+msgstr "lỗi di chuyển ống dẫn đến thiết bị nhập chuẩn trong 
tiến trình con (trùng: %s)"
 
 #: io.c:2060 io.c:2286
 msgid "restoring stdout in parent process failed\n"
@@ -2908,9 +2785,7 @@ msgstr "register_input_parser: nhận được con trỏ 
NULL"
 #: io.c:2762
 #, c-format
 msgid "input parser `%s' conflicts with previously installed input parser `%s'"
-msgstr ""
-"bộ phân tích đầu vào “%s” xung đột với bộ phân tích 
đầu vào được cài đặt "
-"trước đó “%s”"
+msgstr "bộ phân tích đầu vào “%s” xung đột với bộ phân 
tích đầu vào được cài đặt trước đó “%s”"
 
 #: io.c:2769
 #, c-format
@@ -2923,10 +2798,8 @@ msgstr "register_output_wrapper: nhận được con 
trỏ NULL"
 
 #: io.c:2817
 #, c-format
-msgid ""
-"output wrapper `%s' conflicts with previously installed output wrapper `%s'"
-msgstr ""
-"bộ bao kết xuất “%s” xung đột với bộ bao kết xuất 
được cài đặt trước đó “%s”"
+msgid "output wrapper `%s' conflicts with previously installed output wrapper 
`%s'"
+msgstr "bộ bao kết xuất “%s” xung đột với bộ bao kết xuất 
được cài đặt trước đó “%s”"
 
 #: io.c:2824
 #, c-format
@@ -2939,12 +2812,8 @@ msgstr "register_output_processor: nhận được con 
trỏ NULL"
 
 #: io.c:2874
 #, c-format
-msgid ""
-"two-way processor `%s' conflicts with previously installed two-way processor "
-"`%s'"
-msgstr ""
-"bộ xử lý hai hướng “%s” xung đột với bộ xử lý hai 
hướng đã được cài đặt "
-"trước đó “%s”"
+msgid "two-way processor `%s' conflicts with previously installed two-way 
processor `%s'"
+msgstr "bộ xử lý hai hướng “%s” xung đột với bộ xử lý 
hai hướng đã được cài đặt trước đó “%s”"
 
 #: io.c:2883
 #, c-format
@@ -2970,9 +2839,7 @@ msgstr "Truyền thông trên IPv6 không được hỗ 
trợ"
 
 #: main.c:321
 msgid "environment variable `POSIXLY_CORRECT' set: turning on `--posix'"
-msgstr ""
-"biến môi trường “POSIXLY_CORRECT” (đúng kiểu POSIX) đã 
được đặt; đang bật "
-"tùy chọn “--posix”"
+msgstr "biến môi trường “POSIXLY_CORRECT” (đúng kiểu POSIX) đã 
được đặt; đang bật tùy chọn “--posix”"
 
 #: main.c:327
 msgid "`--posix' overrides `--traditional'"
@@ -2980,9 +2847,7 @@ msgstr "tùy chọn “--posix” có quyền cao hơn 
“--traditional” (truy
 
 #: main.c:338
 msgid "`--posix'/`--traditional' overrides `--non-decimal-data'"
-msgstr ""
-"“--posix”/“--traditional” (cổ điển) có quyền cao hơn 
“--non-decimal-"
-"data” (dữ liệu khác thập phân)"
+msgstr "“--posix”/“--traditional” (cổ điển) có quyền cao hơn 
“--non-decimal-data” (dữ liệu khác thập phân)"
 
 #: main.c:342
 #, c-format
@@ -3015,16 +2880,12 @@ msgstr "không có đoạn chữ chương trình nào 
cả!"
 #: main.c:563
 #, c-format
 msgid "Usage: %s [POSIX or GNU style options] -f progfile [--] file ...\n"
-msgstr ""
-"Cách dùng: %s [tùy chọn kiểu POSIX hay GNU] -f 
tập_tin_chương_trình [--] "
-"tập_tin ...\n"
+msgstr "Cách dùng: %s [tùy chọn kiểu POSIX hay GNU] -f 
tập_tin_chương_trình [--] tập_tin …\n"
 
 #: main.c:565
 #, c-format
 msgid "Usage: %s [POSIX or GNU style options] [--] %cprogram%c file ...\n"
-msgstr ""
-"Cách dùng: %s [tùy chọn kiểu POSIX hay GNU] [--] %cchương_trình%c "
-"tập_tin ...\n"
+msgstr "Cách dùng: %s [tùy chọn kiểu POSIX hay GNU] [--] 
%cchương_trình%c tập_tin …\n"
 
 #: main.c:570
 msgid "POSIX options:\t\tGNU long options: (standard)\n"
@@ -3046,7 +2907,7 @@ msgstr ""
 
 #: main.c:574
 msgid "Short options:\t\tGNU long options: (extensions)\n"
-msgstr "Tuỳ chọn ngắn:\t\t\tTuỳ chọn GNU dạng dài: (mở 
rộng)\n"
+msgstr "Tùy chọn ngắn:\t\t\tTùy chọn GNU dạng dài: (mở rộng)\n"
 
 #: main.c:575
 msgid "\t-b\t\t\t--characters-as-bytes\n"
@@ -3093,9 +2954,8 @@ msgid "\t-l library\t\t--load=library\n"
 msgstr "\t-l library\t\t--load=thư-viện\n"
 
 #: main.c:586
-#, fuzzy
 msgid "\t-L[fatal|invalid]\t--lint[=fatal|invalid]\n"
-msgstr "\t-L [fatal]\t\t--lint[=fatal]\n"
+msgstr "\t-L [fatal|invalid]\t--lint[=fatal|invalid]\n"
 
 #: main.c:587
 msgid "\t-M\t\t\t--bignum\n"
@@ -3115,7 +2975,7 @@ msgstr "\t-o[tập_tin]\t\t--pretty-print[=tập_tin]\n"
 
 #: main.c:591
 msgid "\t-O\t\t\t--optimize\n"
-msgstr "\t-O\t\t\t--optimize  (tạm dịch: tối_ưu_hoá)\n"
+msgstr "\t-O\t\t\t--optimize (tối_ưu_hóa)\n"
 
 #: main.c:592
 msgid "\t-p[file]\t\t--profile[=file]\n"
@@ -3164,10 +3024,9 @@ msgid ""
 "\n"
 msgstr ""
 "\n"
-"Để thông báo lỗi, xem nút “Bugs” (lỗi) trong tập tin\n"
-"thông tin “gawk.info”, cái mà nằm trong phần\n"
-"“Reporting Problems and Bugs” (thông báo trục trặc và lỗi)\n"
-"trong bản in.\n"
+"Để thông báo lỗi, xem nút “Bugs” (lỗi) trong tập tin thông 
tin\n"
+"“gawk.info”, cái mà nằm trong phần “Reporting Problems and 
Bugs”\n"
+"(thông báo trục trặc và lỗi) trong bản in.\n"
 "Thông báo lỗi dịch cho: <http://translationproject.org/team/vi.html>.\n"
 "\n"
 
@@ -3188,7 +3047,7 @@ msgid ""
 "\tgawk -F: '{ print $1 }' /etc/passwd\n"
 msgstr ""
 "Ví dụ:\n"
-"\tgawk \"{ sum += $1 }; END { print sum }\" file\n"
+"\tgawk \"{ sum += $1 }; END { print sum }\" tập_tin\n"
 "\tgawk -F: \"{ print $1 }\" /etc/passwd\n"
 
 #: main.c:644
@@ -3298,11 +3157,11 @@ msgstr "không thể mở trước “/dev/null” cho 
fd %d"
 
 #: main.c:1485
 msgid "empty argument to `-e/--source' ignored"
-msgstr "đối số rỗng cho tuỳ chọn “-e/--source” bị bỏ qua"
+msgstr "đối số rỗng cho tùy chọn “-e/--source” bị bỏ qua"
 
 #: main.c:1556
 msgid "-M ignored: MPFR/GMP support not compiled in"
-msgstr ""
+msgstr "-M bị bỏ qua: chưa biên dịch phần hỗ trợ MPFR/GMP"
 
 #: main.c:1577
 #, c-format
@@ -3376,7 +3235,7 @@ msgstr "gặp dấu gạch ngược tại kết thúc 
của chuỗi"
 #: node.c:488
 #, c-format
 msgid "old awk does not support the `\\%c' escape sequence"
-msgstr "awk cũ không hỗ trợ thoát chuỗi  “\\%c”"
+msgstr "awk cũ không hỗ trợ thoát chuỗi “\\%c”"
 
 #: node.c:539
 msgid "POSIX does not allow `\\x' escapes"
@@ -3388,12 +3247,8 @@ msgstr "không có số thập lúc nằm trong thoát 
chuỗi “\\x”"
 
 #: node.c:567
 #, c-format
-msgid ""
-"hex escape \\x%.*s of %d characters probably not interpreted the way you "
-"expect"
-msgstr ""
-"thoát chuỗi thập lục \\x%.*s chứa %d ký tự mà rất có thể 
không phải được đọc "
-"bằng cách dự định"
+msgid "hex escape \\x%.*s of %d characters probably not interpreted the way 
you expect"
+msgstr "thoát chuỗi thập lục \\x%.*s chứa %d ký tự mà rất có 
thể không phải được đọc bằng cách dự định"
 
 #: node.c:582
 #, c-format
@@ -3401,12 +3256,8 @@ msgid "escape sequence `\\%c' treated as plain `%c'"
 msgstr "thoát chuỗi “\\%c” được xử lý như là “%c” chuẩn"
 
 #: node.c:726
-msgid ""
-"Invalid multibyte data detected. There may be a mismatch between your data "
-"and your locale."
-msgstr ""
-"Dữ liệu dạng đa byte (multibyte)  không hợp lệ được tìm 
thấy. Tại đó có lẽ "
-"không khớp giữa dữ liệu của bạn và nơi xảy ra."
+msgid "Invalid multibyte data detected. There may be a mismatch between your 
data and your locale."
+msgstr "Dữ liệu dạng đa byte (multibyte) không hợp lệ được 
tìm thấy. Tại đó có lẽ không khớp giữa dữ liệu của bạn 
và nơi xảy ra."
 
 #: posix/gawkmisc.c:177
 #, c-format
@@ -3416,9 +3267,7 @@ msgstr "%s %s “%s”: không thể lấy cờ mô tả 
(fd): (fcntl F_GETFD: %
 #: posix/gawkmisc.c:189
 #, c-format
 msgid "%s %s `%s': could not set close-on-exec: (fcntl F_SETFD: %s)"
-msgstr ""
-"%s %s “%s”: không thể đặt “close-on-exec” (đóng một khi 
thực hiện): (fcntl "
-"F_SETFD: %s)"
+msgstr "%s %s “%s”: không thể đặt “close-on-exec” (đóng một 
khi thực hiện): (fcntl F_SETFD: %s)"
 
 #: profile.c:71
 #, c-format
@@ -3427,15 +3276,15 @@ msgstr "không thể mở “%s” để ghi: %s"
 
 #: profile.c:73
 msgid "sending profile to standard error"
-msgstr "đang gởi hồ sơ cho thiết bị lỗi chuẩn"
+msgstr "đang gửi hồ sơ cho thiết bị lỗi chuẩn"
 
 #: profile.c:193
-#, fuzzy, c-format
+#, c-format
 msgid ""
 "\t# %s rule(s)\n"
 "\n"
 msgstr ""
-"\t# Quy tắc\n"
+"\t# Quy tắc %s\n"
 "\n"
 
 #: profile.c:198
@@ -3470,7 +3319,7 @@ msgstr ""
 msgid "\t# gawk profile, created %s\n"
 msgstr "\t# hồ sơ gawk, được tạo %s\n"
 
-#: profile.c:1521
+#: profile.c:1535
 #, c-format
 msgid ""
 "\n"
@@ -3479,7 +3328,7 @@ msgstr ""
 "\n"
 "\t# Danh sách các hàm theo thứ tự abc\n"
 
-#: profile.c:1559
+#: profile.c:1573
 #, c-format
 msgid "redir2str: unknown redirection type %d"
 msgstr "redir2str: không hiểu kiểu chuyển hướng %d"
@@ -3487,9 +3336,7 @@ msgstr "redir2str: không hiểu kiểu chuyển hướng 
%d"
 #: re.c:607
 #, c-format
 msgid "regexp component `%.*s' should probably be `[%.*s]'"
-msgstr ""
-"thành phần của biểu thức chính qui (regexp) “%.*s” gần như 
chắc chắn nên là "
-"“[%.*s]”"
+msgstr "thành phần của biểu thức chính qui (regexp) “%.*s” gần 
như chắc chắn nên là “[%.*s]”"
 
 #: regcomp.c:139
 msgid "Success"
@@ -3520,9 +3367,8 @@ msgid "Invalid back reference"
 msgstr "Tham chiếu ngược không hợp lệ"
 
 #: regcomp.c:160
-#, fuzzy
 msgid "Unmatched [, [^, [:, [., or [="
-msgstr "Chưa khớp “[” hay “[^”"
+msgstr "Chưa khớp [, [^, [:, [., hay [="
 
 #: regcomp.c:163
 msgid "Unmatched ( or \\("
@@ -3565,9 +3411,9 @@ msgid "No previous regular expression"
 msgstr "Không có biểu thức chính quy nằm trước"
 
 #: symbol.c:677
-#, fuzzy, c-format
+#, c-format
 msgid "function `%s': can't use function `%s' as a parameter name"
-msgstr "hàm “%s”: không thể dùng tên hàm như là tên tham số"
+msgstr "hàm “%s”: không thể dùng hàm “%s” như là tên tham 
số"
 
 #: symbol.c:809
 msgid "can not pop main context"
@@ -3577,8 +3423,7 @@ msgstr "không thể pop (lấy ra) ngữ cảnh chính"
 #~ msgstr "“getline var” không hợp lệ bên trong quy tắc “%s”"
 
 #~ msgid "no (known) protocol supplied in special filename `%s'"
-#~ msgstr ""
-#~ "trong tên tập tin đặc biệt “%s” không cung cấp giao thức 
(đã biết) nào"
+#~ msgstr "trong tên tập tin đặc biệt “%s” không cung cấp giao 
thức (đã biết) nào"
 
 #~ msgid "special file name `%s' is incomplete"
 #~ msgstr "tên tập tin đặc biệt “%s” chưa xong"
@@ -3621,7 +3466,7 @@ msgstr "không thể pop (lấy ra) ngữ cảnh chính"
 #~ msgstr "“nextfile” (tập tin kế tiếp) là một phần mở rộng 
gawk"
 
 #~ msgid "`delete array' is a gawk extension"
-#~ msgstr "“delete array” (xoá mảng) là một phần mở rộng gawk"
+#~ msgstr "“delete array” (xóa mảng) là một phần mở rộng gawk"
 
 #~ msgid "use of non-array as array"
 #~ msgstr "việc dùng cái khác mảng như là mảng"
@@ -3665,11 +3510,8 @@ msgstr "không thể pop (lấy ra) ngữ cảnh chính"
 #~ msgid "statement has no effect"
 #~ msgstr "câu không có tác dụng"
 
-#~ msgid ""
-#~ "for loop: array `%s' changed size from %ld to %ld during loop execution"
-#~ msgstr ""
-#~ "cho loop: (cho vòng lặp) mảng “%s” đã thay đổi kích 
thước từ %ld đến %ld "
-#~ "trong khi thực hiện vòng lặp"
+#~ msgid "for loop: array `%s' changed size from %ld to %ld during loop 
execution"
+#~ msgstr "cho loop: (cho vòng lặp) mảng “%s” đã thay đổi kích 
thước từ %ld đến %ld trong khi thực hiện vòng lặp"
 
 #~ msgid "function called indirectly through `%s' does not exist"
 #~ msgstr "hàm được gọi gián tiếp thông qua “%s” không tồn 
tại"

-----------------------------------------------------------------------

Summary of changes:
 po/fr.po    |  722 +++++++++++++++++++++------------------------------------
 po/gawk.pot |  248 +++++++++++----------
 po/vi.po    |  738 +++++++++++++++++++++++------------------------------------
 3 files changed, 686 insertions(+), 1022 deletions(-)


hooks/post-receive
-- 
gawk



reply via email to

[Prev in Thread] Current Thread [Next in Thread]