freetype-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[ft-devel] Fw: Compile Error use arm-linux-gcc3.4.1


From: Werner LEMBERG
Subject: [ft-devel] Fw: Compile Error use arm-linux-gcc3.4.1
Date: Sat, 15 Jan 2011 09:17:06 +0100 (CET)

ARM developers, please comment and help if possible!


    Werner

--- Begin Message --- Subject: Compile Error use arm-linux-gcc3.4.1 Date: Fri, 14 Jan 2011 17:51:42 +0800
Hi Werner,
 
We used arm-linux-gcc3.4.1 to compile the freetype 244 
the following error occurred:
 
/tmp/ccYNGbm3.s: Assembler messages:
/tmp/ccYNGbm3.s:7607: Error: register or shift _expression_ expected -- `orr r2,ip,lsl#16'
/tmp/ccYNGbm3.s:7623: Error: register or shift _expression_ expected -- `orr r2,lr,lsl#16'
/tmp/ccYNGbm3.s:8603: Error: register or shift _expression_ expected -- `orr r3,r2,lsl#16'
/tmp/ccYNGbm3.s:8614: Error: register or shift _expression_ expected -- `orr r3,r2,lsl#16'
/tmp/ccYNGbm3.s:8630: Error: register or shift _expression_ expected -- `orr r3,r2,lsl#16'
/tmp/ccYNGbm3.s:8641: Error: register or shift _expression_ expected -- `orr r3,r2,lsl#16'
 
We found in the "include/freetype/config/ftconfig.h",  there were arm assembly for FT_MulFix
 
You can see the line 358:
"orr    %0, %2, lsl #16\n\t"  /* %0 |= %2 << 16 */
 
Maybe this section of arm assembly code only for the armv5 and above processors, and gcc3.4.1 compiler corresponds to s3c2440,it is armv4.
 
can you use gcc341 do a test?
 
 
 
 
 
 
 
 
Johnson Y. Yan
 
This email may contain information which is privileged, confidential, legally privileged, and/or exempt from disclosure under applicable law. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or use of the information contained herein (including any reliance thereon) is strictly prohibited. It is also the sole responsibility of the recipient to ensure that the email is virus free and no responsibility is accepted by Foxit Corporation, as applicable, for any loss or damage arising in any way from using this email. If you received this email in error, please immediately contact the sender and destroy the material in its entirety.
 
 

--- End Message ---

reply via email to

[Prev in Thread] Current Thread [Next in Thread]