[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Freeipmi-users] I would appreciate any advice on how to troubleshoo
From: |
Hank Bruning |
Subject: |
Re: [Freeipmi-users] I would appreciate any advice on how to troubleshoot this issue.(ipmi_sdr_cache_create: internal IPMI error) |
Date: |
Fri, 31 Oct 2014 14:23:31 -0400 |
And if if it as OCP Facebook server there is no SDR repository.
Hank Bruning
JBlade
On Thu, Oct 30, 2014 at 6:27 PM, Albert Chu <address@hidden> wrote:
> I implemented a workaround for your motherboard. The workaround is
> 'nosdrinfo' and in most FreeIPMI tools you'd pass '-W nosdrinfo' to use
> it. Could you please try the code in this branch.
>
> svn co http://svn.savannah.gnu.org/svn/freeipmi/branches/nosdrinfo
> freeipmi
> cd freeipmi
> ./autogen.sh
> ./configure
> make
> ipmi-sensors/ipmi-sensors -W nosdrinfo
>
> Not sure what version of FreeIPMI your using. The ipmimonitoring script
> is in ipmi-sensors/ but it may not be set up with the right paths until
> it's installed. It's very close to:
>
> ipmi-sensors/ipmi-sensors -W nosdrinfo --output-sensor-state
> --ignore-not-available-sensors
>
> Al
>
> On Fri, 2014-10-31 at 03:13 +0900, Xrosgen/김순규 wrote:
> > Hi, Al
> >
> >
> > Thank you for reply.
> >
> > I told your reply to the Artesyn(manufacturer).
> >
> >
> > Best regards,
> > Sunkyu, Kim
> >
> > Team Manager | Customer Support Team 1
> > T +82-2-3775-8668 | F +82-2-704-3395 | M +82-10-6700-4546
> > NateON address@hidden | E.Mail address@hidden
> > Xrosgen lnc. | 810/811 B dong , 583, Yangcheon-ro, Gangseo-gu, Seoul,
> 157-779, Korea
> >
> > -----Original Message-----
> > From: Albert Chu [mailto:address@hidden
> > Sent: Friday, October 31, 2014 2:18 AM
> > To: Xrosgen/김순규
> > Cc: address@hidden
> > Subject: RE: I would appreciate any advice on how to troubleshoot this
> issue.(ipmi_sdr_cache_create: internal IPMI error)
> >
> >
> > On Thu, 2014-10-30 at 16:41 +0900, Xrosgen/김순규 wrote:
> > > Hi, Al
> > >
> > >
> > >
> > >
> > >
> > > Is this problem of freeipmi source? ( Ipmitool sensor normal,
> > > ipmimonitoring sensor abnormal )
> >
> > The "get SDR repository information" is required by the vendor and is an
> error on their part. They can see IPMI spec chapter 33.7, table 33-2 for
> proof.
> >
> > In the mean time, I will see if I can get FreeIPMI to work without it.
> >
> > Al
> >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > Artesyn company said
> > >
> > >
> > >
> > > After detail check the freeipmi source code, when you execute
> > > ipmimonitoring command, it use get SDR Repository information command.
> > >
> > > Unfortunately, ATCA-7365/7370 don’t support “get SDR Repository”
> > > command.
> > >
> > > That is why ipmimoitoring return error information when you execute
> > > ipmimonitoring tool.
> > >
> > > The below information is how to get SDR repository through raw
> > > command.
> > >
> > >
> > >
> > > address@hidden home]# ipmitool raw 0x0a 0x20
> > >
> > > Unable to send RAW command (channel=0x0 netfn=0xa lun=0x0 cmd=0x20
> > > rsp=0xc1): Invalid command
> > >
> > > address@hidden home]# ipmitool fru
> > >
> > > FRU Device Description : Builtin FRU Device (ID 0)
> > >
> > > Board Mfg Date : Fri Dec 3 18:16:00 2010
> > >
> > > Board Mfg : EMERSON
> > >
> > > Board Product : PCA,ATCA-7365CE/80W/24GB/R.1.21/6E
> > >
> > > Board Serial : E015B62
> > >
> > > Board Part Number : 0106865F17D
> > >
> > > Product Manufacturer : EMERSON
> > >
> > > Product Name : PCA,ATCA-7365CE/80W/24GB/R.1.21/6E
> > >
> > > Product Part Number : 0106865F17D
> > >
> > > Product Version : R1.21
> > >
> > > Product Serial : E015B62
> > >
> > >
> > >
> > > FRU Device Description : RTM-ATCA-736X-DD (ID 1)
> > >
> > > Board Mfg Date : Wed Feb 16 16:25:00 2011
> > >
> > > Board Mfg : Emerson
> > >
> > > Board Product : RTM-ATCA-736X-DD
> > >
> > > Board Serial : 450A1010026
> > >
> > > Board Part Number : 0106812K02A
> > >
> > > Product Manufacturer : Emerson
> > >
> > > Product Name : RTM-ATCA-736X-DD
> > >
> > > Product Part Number : 0106812K02A
> > >
> > > Product Version : A
> > >
> > > Product Serial : 450A1010026
> > >
> > > Product Asset Tag : 01
> > >
> > >
> > >
> > > address@hidden home]#
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > address@hidden: ~]# ipmitool -V
> > >
> > > ipmitool version 1.8.15-rc1
> > >
> > > address@hidden: ~]# ipmitool sensor
> > >
> > > Hotswap Carrier | 0x0 | discrete | 0x1080| na | na
> > > | na | na | na | na
> > >
> > > Hotswap_AMC | 0x0 | discrete | 0x1080| na | na
> > > | na | na | na | na
> > >
> > > Hotswap_RTM | 0x0 | discrete | 0x1080| na | na
> > > | na | na | na | na
> > >
> > > -48V A Volts | 4.550 | Volts | nr | 39.000 |
> > > 40.300 | na | na | 72.475 | 73.450
> > >
> > > -48V B Volts | 50.700 | Volts | ok | 39.000 |
> > > 40.300 | na | na | 72.475 | 73.450
> > >
> > > -48V Amps | 1.410 | Amps | ok | na | na
> > > | na | na | na | na
> > >
> > > HoldUp Cap Volts | 93.132 | Volts | ok | na | na
> > > | na | na | na | na
> > >
> > > PWR Entry Temp | 36.340 | degrees C | ok | na | na
> > > | na | 65.740 | 75.540 | na
> > >
> > > PWR Entry Status | 0x0 | discrete | 0x0100| na | na
> > > | na | na | na | na
> > >
> > > Bottom Edge Temp | 27.000 | degrees C | ok | na | na
> > > | na | 44.000 | 57.000 | 66.000
> > >
> > > Top Edge Temp | 39.000 | degrees C | ok | na | na
> > > | na | 66.000 | 76.000 | 85.000
> > >
> > > IPMC Temp | 33.000 | degrees C | ok | na | na
> > > | na | 69.000 | 79.000 | 88.000
> > >
> > > CPU Temp | 32.000 | degrees C | ok | na | na
> > > | na | 70.000 | 85.000 | 95.000
> > >
> > > DDR 1 Temp | 30.000 | degrees C | ok | na | na
> > > | na | 71.000 | 81.000 | 90.000
> > >
> > > DDR 2 Temp | 31.000 | degrees C | ok | na | na
> > > | na | 71.000 | 81.000 | 90.000
> > >
> > > DDR 3 Temp | 30.000 | degrees C | ok | na | na
> > > | na | 71.000 | 81.000 | 90.000
> > >
> > > DDR 4 Temp | 30.000 | degrees C | ok | na | na
> > > | na | 71.000 | 81.000 | 90.000
> > >
> > > DDR 5 Temp | 31.000 | degrees C | ok | na | na
> > > | na | 71.000 | 81.000 | 90.000
> > >
> > > DDR 6 Temp | 31.000 | degrees C | ok | na | na
> > > | na | 71.000 | 81.000 | 90.000
> > >
> > > IPMB Physical | 0x88 | discrete | 0x0880| na | na
> > > | na | na | na | na
> > >
> > > BMC Watchdog | 0x0 | discrete | 0x0000| na | na
> > > | na | na | na | na
> > >
> > > IPMC POST | 0x0 | discrete | 0x0100| na | na
> > > | na | na | na | na
> > >
> > > Version Change | 0x0 | discrete | 0x0000| na | na
> > > | na | na | na | na
> > >
> > > Fw Progress | 0x0 | discrete | 0x0480| na |
> > > na | na | na | na | na
> > >
> > > OS Boot | na | discrete | na | na | na
> > > | na | na | na | na
> > >
> > > Boot Error | na | discrete | na | na | na
> > > | na | na | na | na
> > >
> > > Boot Initiated | 0x0 | discrete | 0x0180| na | na
> > > | na | na | na | na
> > >
> > > POST Code | 0x0 | discrete | 0x0000| na | na
> > > | na | na | na | na
> > >
> > > ATCA-7367 IPMC | 0x0 | discrete | 0x1400| na | na
> > > | na | na | na | na
> > >
> > > Power Good | 0x0 | discrete | 0x0100| na | na
> > > | na | na | na | na
> > >
> > > Boot Bank | 0x0 | discrete | 0x0000| na | na
> > > | na | na | na | na
> > >
> > > Reset Source | 0x0 | discrete | 0x0100| na | na
> > > | na | na | na | na
> > >
> > > CPU Status | na | discrete | na | na | na
> > > | na | na | na | na
> > >
> > > +3.3V | 3.319 | Volts | ok | 3.005 | 3.105
> > > | 3.162 | 3.462 | 3.505 | 3.605
> > >
> > > +5V | 5.024 | Volts | ok | 4.509 | 4.656
> > > | 4.754 | 5.269 | 5.367 | 5.514
> > >
> > > +12V | 11.842 | Volts | ok | 10.027 |
> > > 10.248 | 10.853 | 13.218 | 13.822 | 14.043
> > >
> > > Board Temp | 40.330 | degrees C | ok | na | na
> > > | na | 60.740 | 70.160 | 81.150
> > >
> > > Inlet Temp | 36.000 | degrees C | ok | na | na
> > > | na | 50.000 | 60.000 | 70.000
> > >
> > > Version change | na | discrete | na | na | na
> > > | na | na | na | na
> > >
> > > +3.3V RTM | 3.299 | Volts | ok | 2.909 | 3.007
> > > | na | na | 3.611 | 3.709
> > >
> > > +12V RTM | 11.896 | Volts | ok | 10.834 |
> > > 11.129 | na | na | 12.957 | 13.252
> > >
> > > +1.2V RTM | 1.220 | Volts | ok | 0.900 | 1.140
> > > | na | na | 1.260 | 1.500
> > >
> > > +1.0V RTM | 1.000 | Volts | ok | 0.393 | 0.931
> > > | na | na | 1.079 | 1.618
> > >
> > > temp in RTM | 27.000 | degrees C | ok | na | na
> > > | na | 40.000 | 55.000 | na
> > >
> > > temp SAS | 39.000 | degrees C | ok | na | na
> > > | na | 40.000 | 55.000 | na
> > >
> > > temp ETH | 36.000 | degrees C | ok | na | na
> > > | na | 40.000 | 55.000 | na
> > >
> > > address@hidden: ~]# ipmimonitoring -V
> > >
> > > ipmi-sensors - 1.4.5
> > >
> > > Copyright (C) 2003-2014 FreeIPMI Core Team
> > >
> > > This program is free software; you may redistribute it under the terms
> > > of
> > >
> > > the GNU General Public License. This program has absolutely no
> > > warranty.
> > >
> > > address@hidden: ~]# ipmimonitoring
> > >
> > > Caching SDR repository
> > > information: /root/.freeipmi/sdr-cache/sdr-cache-fw.localhost
> > >
> > > ipmi_sdr_cache_create: internal IPMI error
> > >
> > > address@hidden: ~]#
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > Best regards,
> > >
> > > Sunkyu, Kim
> > >
> > >
> > >
> > > Team Manager | Customer Support Team 1
> > >
> > > T +82-2-3775-8668 | F +82-2-704-3395 | M +82-10-6700-4546
> > >
> > > NateON address@hidden | E.Mail address@hidden
> > >
> > > Xrosgen lnc. | 810/811 B dong , 583, Yangcheon-ro, Gangseo-gu, Seoul,
> > > 157-779, Korea
> > >
> > >
> > >
> > > -----Original Message-----
> > > From: Albert Chu [mailto:address@hidden
> > > Sent: Friday, October 3, 2014 2:16 AM
> > > To: address@hidden
> > > Cc: address@hidden
> > > Subject: Re: I would appreciate any advice on how to troubleshoot this
> > > issue.(ipmi_sdr_cache_create: internal IPMI error)
> > >
> > >
> > >
> > > Hi
> > >
> > >
> > >
> > > =====================================================
> > >
> > >
> > >
> > > Get SDR Repository Info Response
> > >
> > >
> > >
> > > =====================================================
> > >
> > >
> > >
> > > [ 20h] = cmd[ 8b]
> > >
> > >
> > >
> > > [ C1h] = comp_code[ 8b]
> > >
> > >
> > >
> > > 0xC1 means that there is no IPMI support for the "Get SDR Repository
> > > Info" command on this motherboard. This is a requirement for all IPMI
> > > motherboards and is really bad.
> > >
> > >
> > >
> > > It is very likely a firmware issue w/ the vendor.
> > >
> > >
> > >
> > > Al
> > >
> > >
> > >
> > > > Hello
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > I live in South Korea Sunkyu.
> > >
> > > >
> > >
> > > > I can not english well.
> > >
> > > >
> > >
> > > > I am having problems using ipmimonitoring on a ATCA-7367
> > > ( Artesyn ).
> > >
> > > >
> > >
> > > > I consistently get "ipmi_sdr_cache_create: internal IPMI error"
> > >
> > > > messages.
> > >
> > > >
> > >
> > > > I have attached the debug information below.
> > >
> > > >
> > >
> > > > Artesyn company said : if this issue caused by IPMI firmware,
> > > Artesyn
> > >
> > > > will fix it.
> > >
> > > >
> > >
> > > > I would appreciate any advice on how to troubleshoot this issue.
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > Have a nice day!
> > >
> > > >
> > >
> > > > Best regards
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > address@hidden: ~]# uname -a
> > >
> > > >
> > >
> > > > Linux localhost2.6.32-431.29.2.el6.x86_64 #1 SMP Tue Sep 9 21:36:05
> > >
> > > > UTC 2014 x86_64 x86_64 x86_64 GNU/Linux
> > >
> > > >
> > >
> > > > address@hidden: ~]# cat /etc/redhat-release
> > >
> > > >
> > >
> > > > CentOS release 6.5 (Final)
> > >
> > > >
> > >
> > > > address@hidden: ~]# ipmimonitoring -V
> > >
> > > >
> > >
> > > > ipmi-sensors - 1.4.5
> > >
> > > >
> > >
> > > > Copyright (C) 2003-2014 FreeIPMI Core Team
> > >
> > > >
> > >
> > > > This program is free software; you may redistribute it under the
> > > terms
> > >
> > > > of
> > >
> > > >
> > >
> > > > the GNU General Public License. This program has absolutely no
> > >
> > > > warranty.
> > >
> > > >
> > >
> > > > address@hidden: ~]# ipmimonitoring --debug
> > >
> > > >
> > >
> > > > Caching SDR repository
> > >
> > > > information: /root/.freeipmi/sdr-cache/sdr-cache-fw.localhost
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > Get SDR Repository Info Request
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > [ 20h] = cmd[ 8b]
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > Get SDR Repository Info Response
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > [ 20h] = cmd[ 8b]
> > >
> > > >
> > >
> > > > [ C1h] = comp_code[ 8b]
> > >
> > > >
> > >
> > > > ipmi_sdr_cache_create: internal IPMI error
> > >
> > > >
> > >
> > > > address@hidden: ~]# ipmimonitoring -D KCS
> > >
> > > >
> > >
> > > > Caching SDR repository
> > >
> > > > information: /root/.freeipmi/sdr-cache/sdr-cache-fw.localhost
> > >
> > > >
> > >
> > > > ipmi_sdr_cache_create: internal IPMI error
> > >
> > > >
> > >
> > > > address@hidden: ~]# bmc-info --debug
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > Get Device ID Request
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > [ 1h] = cmd[ 8b]
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > Get Device ID Response
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > [ 1h] = cmd[ 8b]
> > >
> > > >
> > >
> > > > [ 0h] = comp_code[ 8b]
> > >
> > > >
> > >
> > > > [ 0h] = device_id[ 8b]
> > >
> > > >
> > >
> > > > [ 0h] = device_revision.revision[ 4b]
> > >
> > > >
> > >
> > > > [ 0h] = device_revision.reserved1[ 3b]
> > >
> > > >
> > >
> > > > [ 1h] = device_revision.sdr_support[ 1b]
> > >
> > > >
> > >
> > > > [ 2h] = firmware_revision1.major_revision[ 7b]
> > >
> > > >
> > >
> > > > [ 0h] = firmware_revision1.device_available[ 1b]
> > >
> > > >
> > >
> > > > [ 0h] = firmware_revision2.minor_revision[ 8b]
> > >
> > > >
> > >
> > > > [ 1h] = ipmi_version_major[ 4b]
> > >
> > > >
> > >
> > > > [ 5h] = ipmi_version_minor[ 4b]
> > >
> > > >
> > >
> > > > [ 1h] = additional_device_support.sensor_device[ 1b]
> > >
> > > >
> > >
> > > > [ 0h] =
> > >
> > > > additional_device_support.sdr_repository_device[ 1b]
> > >
> > > >
> > >
> > > > [ 1h] = additional_device_support.sel_device[ 1b]
> > >
> > > >
> > >
> > > > [ 1h] =
> > >
> > > > additional_device_support.fru_inventory_device[ 1b]
> > >
> > > >
> > >
> > > > [ 0h] =
> > >
> > > > additional_device_support.ipmb_event_receiver[ 1b]
> > >
> > > >
> > >
> > > > [ 1h] =
> > >
> > > > additional_device_support.ipmb_event_generator[ 1b]
> > >
> > > >
> > >
> > > > [ 0h] = additional_device_support.bridge[ 1b]
> > >
> > > >
> > >
> > > > [ 0h] = additional_device_support.chassis_device[ 1b]
> > >
> > > >
> > >
> > > > [ 65CDh] = manufacturer_id.id[20b]
> > >
> > > >
> > >
> > > > [ 0h] = manufacturer_id.reserved1[ 4b]
> > >
> > > >
> > >
> > > > [ 26h] = product_id[16b]
> > >
> > > >
> > >
> > > > [ 23000000h] = auxiliary_firmware_revision_information[32b]
> > >
> > > >
> > >
> > > > Device ID : 0
> > >
> > > >
> > >
> > > > Device Revision : 0
> > >
> > > >
> > >
> > > > Device SDRs : supported
> > >
> > > >
> > >
> > > > Firmware Revision : 2.00
> > >
> > > >
> > >
> > > > Device Available : yes (normal operation)
> > >
> > > >
> > >
> > > > IPMI Version : 1.5
> > >
> > > >
> > >
> > > > Sensor Device : supported
> > >
> > > >
> > >
> > > > SDR Repository Device : unsupported
> > >
> > > >
> > >
> > > > SEL Device : supported
> > >
> > > >
> > >
> > > > FRU Inventory Device : supported
> > >
> > > >
> > >
> > > > IPMB Event Receiver : unsupported
> > >
> > > >
> > >
> > > > IPMB Event Generator : supported
> > >
> > > >
> > >
> > > > Bridge : unsupported
> > >
> > > >
> > >
> > > > Chassis Device : unsupported
> > >
> > > >
> > >
> > > > Manufacturer ID : Emerson Network Power, Embedded Computing
> > >
> > > > (26061)
> > >
> > > >
> > >
> > > > Product ID : 38
> > >
> > > >
> > >
> > > > Auxiliary Firmware Revision Information : 23000000h
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > Get Device GUID Request
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > [ 8h] = cmd[ 8b]
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > Get Device GUID Response
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > [ 8h] = cmd[ 8b]
> > >
> > > >
> > >
> > > > [ 0h] = comp_code[ 8b]
> > >
> > > >
> > >
> > > > [ BYTE ARRAY ... ] = guid[16B]
> > >
> > > >
> > >
> > > > [ 4Bh FCh 2Eh AFh 01h 00h 01h 00h ]
> > >
> > > >
> > >
> > > > [ DFh 11h B4h 5Fh 00h 40h 0Bh CEh ]
> > >
> > > >
> > >
> > > > Device GUID : ce0b4000-5fb4-11df-0001-0001af2efc4b
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > Get System GUID Request
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > [ 37h] = cmd[ 8b]
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > Get System GUID Response
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > [ 37h] = cmd[ 8b]
> > >
> > > >
> > >
> > > > [ 0h] = comp_code[ 8b]
> > >
> > > >
> > >
> > > > [ BYTE ARRAY ... ] = guid[16B]
> > >
> > > >
> > >
> > > > [ 00h 00h 00h 00h 00h 00h 00h 00h ]
> > >
> > > >
> > >
> > > > [ 00h 00h 00h 00h 00h 00h 00h 00h ]
> > >
> > > >
> > >
> > > > System GUID : 00000000-0000-0000-0000-000000000000
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > Get System Info Parameters Request
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > [ 59h] = cmd[ 8b]
> > >
> > > >
> > >
> > > > [ 0h] = reserved[ 7b]
> > >
> > > >
> > >
> > > > [ 0h] = get_parameter[ 1b]
> > >
> > > >
> > >
> > > > [ 1h] = parameter_selector[ 8b]
> > >
> > > >
> > >
> > > > [ 0h] = set_selector[ 8b]
> > >
> > > >
> > >
> > > > [ 0h] = block_selector[ 8b]
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > Get System Info Parameters Response
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > [ 59h] = cmd[ 8b]
> > >
> > > >
> > >
> > > > [ C1h] = comp_code[ 8b]
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > Get Channel Info Command Request
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > [ 42h] = cmd[ 8b]
> > >
> > > >
> > >
> > > > [ 0h] = channel_number[ 4b]
> > >
> > > >
> > >
> > > > [ 0h] = reserved[ 4b]
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > Get Channel Info Command Response
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > [ 42h] = cmd[ 8b]
> > >
> > > >
> > >
> > > > [ 0h] = comp_code[ 8b]
> > >
> > > >
> > >
> > > > [ 0h] = actual_channel_number[ 4b]
> > >
> > > >
> > >
> > > > [ 0h] = actual_channel_number.reserved[ 4b]
> > >
> > > >
> > >
> > > > [ 1h] = channel_medium_type[ 7b]
> > >
> > > >
> > >
> > > > [ 0h] = channel_medium_type.reserved[ 1b]
> > >
> > > >
> > >
> > > > [ 1h] = channel_protocol_type[ 5b]
> > >
> > > >
> > >
> > > > [ 0h] = channel_protocol_type.reserved[ 3b]
> > >
> > > >
> > >
> > > > [ 0h] = active_session_count[ 6b]
> > >
> > > >
> > >
> > > > [ 0h] = session_support[ 2b]
> > >
> > > >
> > >
> > > > [ 1BF2h] = vendor_id[24b]
> > >
> > > >
> > >
> > > > [ 0h] = auxiliary_channel_info[16b]
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > Get Channel Info Command Request
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > [ 42h] = cmd[ 8b]
> > >
> > > >
> > >
> > > > [ 1h] = channel_number[ 4b]
> > >
> > > >
> > >
> > > > [ 0h] = reserved[ 4b]
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > Get Channel Info Command Response
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > [ 42h] = cmd[ 8b]
> > >
> > > >
> > >
> > > > [ 0h] = comp_code[ 8b]
> > >
> > > >
> > >
> > > > [ 1h] = actual_channel_number[ 4b]
> > >
> > > >
> > >
> > > > [ 0h] = actual_channel_number.reserved[ 4b]
> > >
> > > >
> > >
> > > > [ 5h] = channel_medium_type[ 7b]
> > >
> > > >
> > >
> > > > [ 0h] = channel_medium_type.reserved[ 1b]
> > >
> > > >
> > >
> > > > [ 9h] = channel_protocol_type[ 5b]
> > >
> > > >
> > >
> > > > [ 0h] = channel_protocol_type.reserved[ 3b]
> > >
> > > >
> > >
> > > > [ 0h] = active_session_count[ 6b]
> > >
> > > >
> > >
> > > > [ 0h] = session_support[ 2b]
> > >
> > > >
> > >
> > > > [ 400Ah] = vendor_id[24b]
> > >
> > > >
> > >
> > > > [ 0h] = auxiliary_channel_info[16b]
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > Get Channel Info Command Request
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > [ 42h] = cmd[ 8b]
> > >
> > > >
> > >
> > > > [ 2h] = channel_number[ 4b]
> > >
> > > >
> > >
> > > > [ 0h] = reserved[ 4b]
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > Get Channel Info Command Response
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > [ 42h] = cmd[ 8b]
> > >
> > > >
> > >
> > > > [ CBh] = comp_code[ 8b]
> > >
> > > >
> > >
> > > > [ 1h] = actual_channel_number[ 4b]
> > >
> > > >
> > >
> > > > [ 0h] = actual_channel_number.reserved[ 4b]
> > >
> > > >
> > >
> > > > [ 5h] = channel_medium_type[ 7b]
> > >
> > > >
> > >
> > > > [ 0h] = channel_medium_type.reserved[ 1b]
> > >
> > > >
> > >
> > > > [ 9h] = channel_protocol_type[ 5b]
> > >
> > > >
> > >
> > > > [ 0h] = channel_protocol_type.reserved[ 3b]
> > >
> > > >
> > >
> > > > [ 0h] = active_session_count[ 6b]
> > >
> > > >
> > >
> > > > [ 0h] = session_support[ 2b]
> > >
> > > >
> > >
> > > > [ 400Ah] = vendor_id[24b]
> > >
> > > >
> > >
> > > > [ 0h] = auxiliary_channel_info[16b]
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > Get Channel Info Command Request
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > [ 42h] = cmd[ 8b]
> > >
> > > >
> > >
> > > > [ 3h] = channel_number[ 4b]
> > >
> > > >
> > >
> > > > [ 0h] = reserved[ 4b]
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > Get Channel Info Command Response
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > [ 42h] = cmd[ 8b]
> > >
> > > >
> > >
> > > > [ CBh] = comp_code[ 8b]
> > >
> > > >
> > >
> > > > [ 1h] = actual_channel_number[ 4b]
> > >
> > > >
> > >
> > > > [ 0h] = actual_channel_number.reserved[ 4b]
> > >
> > > >
> > >
> > > > [ 5h] = channel_medium_type[ 7b]
> > >
> > > >
> > >
> > > > [ 0h] = channel_medium_type.reserved[ 1b]
> > >
> > > >
> > >
> > > > [ 9h] = channel_protocol_type[ 5b]
> > >
> > > >
> > >
> > > > [ 0h] = channel_protocol_type.reserved[ 3b]
> > >
> > > >
> > >
> > > > [ 0h] = active_session_count[ 6b]
> > >
> > > >
> > >
> > > > [ 0h] = session_support[ 2b]
> > >
> > > >
> > >
> > > > [ 400Ah] = vendor_id[24b]
> > >
> > > >
> > >
> > > > [ 0h] = auxiliary_channel_info[16b]
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > Get Channel Info Command Request
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > [ 42h] = cmd[ 8b]
> > >
> > > >
> > >
> > > > [ 4h] = channel_number[ 4b]
> > >
> > > >
> > >
> > > > [ 0h] = reserved[ 4b]
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > Get Channel Info Command Response
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > [ 42h] = cmd[ 8b]
> > >
> > > >
> > >
> > > > [ 0h] = comp_code[ 8b]
> > >
> > > >
> > >
> > > > [ 4h] = actual_channel_number[ 4b]
> > >
> > > >
> > >
> > > > [ 0h] = actual_channel_number.reserved[ 4b]
> > >
> > > >
> > >
> > > > [ Ch] = channel_medium_type[ 7b]
> > >
> > > >
> > >
> > > > [ 0h] = channel_medium_type.reserved[ 1b]
> > >
> > > >
> > >
> > > > [ 5h] = channel_protocol_type[ 5b]
> > >
> > > >
> > >
> > > > [ 0h] = channel_protocol_type.reserved[ 3b]
> > >
> > > >
> > >
> > > > [ 0h] = active_session_count[ 6b]
> > >
> > > >
> > >
> > > > [ 0h] = session_support[ 2b]
> > >
> > > >
> > >
> > > > [ 1BF2h] = vendor_id[24b]
> > >
> > > >
> > >
> > > > [ 0h] = auxiliary_channel_info[16b]
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > Get Channel Info Command Request
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > [ 42h] = cmd[ 8b]
> > >
> > > >
> > >
> > > > [ 5h] = channel_number[ 4b]
> > >
> > > >
> > >
> > > > [ 0h] = reserved[ 4b]
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > Get Channel Info Command Response
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > [ 42h] = cmd[ 8b]
> > >
> > > >
> > >
> > > > [ 0h] = comp_code[ 8b]
> > >
> > > >
> > >
> > > > [ 5h] = actual_channel_number[ 4b]
> > >
> > > >
> > >
> > > > [ 0h] = actual_channel_number.reserved[ 4b]
> > >
> > > >
> > >
> > > > [ 4h] = channel_medium_type[ 7b]
> > >
> > > >
> > >
> > > > [ 0h] = channel_medium_type.reserved[ 1b]
> > >
> > > >
> > >
> > > > [ 1h] = channel_protocol_type[ 5b]
> > >
> > > >
> > >
> > > > [ 0h] = channel_protocol_type.reserved[ 3b]
> > >
> > > >
> > >
> > > > [ 0h] = active_session_count[ 6b]
> > >
> > > >
> > >
> > > > [ 2h] = session_support[ 2b]
> > >
> > > >
> > >
> > > > [ 1BF2h] = vendor_id[24b]
> > >
> > > >
> > >
> > > > [ 0h] = auxiliary_channel_info[16b]
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > Get Channel Info Command Request
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > [ 42h] = cmd[ 8b]
> > >
> > > >
> > >
> > > > [ 6h] = channel_number[ 4b]
> > >
> > > >
> > >
> > > > [ 0h] = reserved[ 4b]
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > Get Channel Info Command Response
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > [ 42h] = cmd[ 8b]
> > >
> > > >
> > >
> > > > [ 0h] = comp_code[ 8b]
> > >
> > > >
> > >
> > > > [ 6h] = actual_channel_number[ 4b]
> > >
> > > >
> > >
> > > > [ 0h] = actual_channel_number.reserved[ 4b]
> > >
> > > >
> > >
> > > > [ 4h] = channel_medium_type[ 7b]
> > >
> > > >
> > >
> > > > [ 0h] = channel_medium_type.reserved[ 1b]
> > >
> > > >
> > >
> > > > [ 1h] = channel_protocol_type[ 5b]
> > >
> > > >
> > >
> > > > [ 0h] = channel_protocol_type.reserved[ 3b]
> > >
> > > >
> > >
> > > > [ 0h] = active_session_count[ 6b]
> > >
> > > >
> > >
> > > > [ 2h] = session_support[ 2b]
> > >
> > > >
> > >
> > > > [ 1BF2h] = vendor_id[24b]
> > >
> > > >
> > >
> > > > [ 0h] = auxiliary_channel_info[16b]
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > Get Channel Info Command Request
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > [ 42h] = cmd[ 8b]
> > >
> > > >
> > >
> > > > [ 7h] = channel_number[ 4b]
> > >
> > > >
> > >
> > > > [ 0h] = reserved[ 4b]
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > Get Channel Info Command Response
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > [ 42h] = cmd[ 8b]
> > >
> > > >
> > >
> > > > [ 0h] = comp_code[ 8b]
> > >
> > > >
> > >
> > > > [ 7h] = actual_channel_number[ 4b]
> > >
> > > >
> > >
> > > > [ 0h] = actual_channel_number.reserved[ 4b]
> > >
> > > >
> > >
> > > > [ 1h] = channel_medium_type[ 7b]
> > >
> > > >
> > >
> > > > [ 0h] = channel_medium_type.reserved[ 1b]
> > >
> > > >
> > >
> > > > [ 1h] = channel_protocol_type[ 5b]
> > >
> > > >
> > >
> > > > [ 0h] = channel_protocol_type.reserved[ 3b]
> > >
> > > >
> > >
> > > > [ 0h] = active_session_count[ 6b]
> > >
> > > >
> > >
> > > > [ 0h] = session_support[ 2b]
> > >
> > > >
> > >
> > > > [ 1BF2h] = vendor_id[24b]
> > >
> > > >
> > >
> > > > [ 0h] = auxiliary_channel_info[16b]
> > >
> > > >
> > >
> > > > Channel Information
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > Channel Number : 0
> > >
> > > >
> > >
> > > > Medium Type : IPMB (I2C)
> > >
> > > >
> > >
> > > > Protocol Type : IPMB-1.0
> > >
> > > >
> > >
> > > > Active Session Count : 0
> > >
> > > >
> > >
> > > > Session Support : session-less
> > >
> > > >
> > >
> > > > Vendor ID : Intelligent Platform Management Interface
> > > forum
> > >
> > > > (7154)
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > Channel Number : 1
> > >
> > > >
> > >
> > > > Medium Type : Asynch. Serial/Modem (RS-232)
> > >
> > > >
> > >
> > > > Protocol Type : TMODE
> > >
> > > >
> > >
> > > > Active Session Count : 0
> > >
> > > >
> > >
> > > > Session Support : session-less
> > >
> > > >
> > >
> > > > Vendor ID : Pigeon Point Systems (16394)
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > Channel Number : 4
> > >
> > > >
> > >
> > > > Medium Type : System Interface (KCS, SMIC, or BT)
> > >
> > > >
> > >
> > > > Protocol Type : KCS
> > >
> > > >
> > >
> > > > Active Session Count : 0
> > >
> > > >
> > >
> > > > Session Support : session-less
> > >
> > > >
> > >
> > > > Vendor ID : Intelligent Platform Management Interface
> > > forum
> > >
> > > > (7154)
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > Channel Number : 5
> > >
> > > >
> > >
> > > > Medium Type : 802.3 LAN
> > >
> > > >
> > >
> > > > Protocol Type : IPMB-1.0
> > >
> > > >
> > >
> > > > Active Session Count : 0
> > >
> > > >
> > >
> > > > Session Support : multi-session
> > >
> > > >
> > >
> > > > Vendor ID : Intelligent Platform Management Interface
> > > forum
> > >
> > > > (7154)
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > Channel Number : 6
> > >
> > > >
> > >
> > > > Medium Type : 802.3 LAN
> > >
> > > >
> > >
> > > > Protocol Type : IPMB-1.0
> > >
> > > >
> > >
> > > > Active Session Count : 0
> > >
> > > >
> > >
> > > > Session Support : multi-session
> > >
> > > >
> > >
> > > > Vendor ID : Intelligent Platform Management Interface
> > > forum
> > >
> > > > (7154)
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > Channel Number : 7
> > >
> > > >
> > >
> > > > Medium Type : IPMB (I2C)
> > >
> > > >
> > >
> > > > Protocol Type : IPMB-1.0
> > >
> > > >
> > >
> > > > Active Session Count : 0
> > >
> > > >
> > >
> > > > Session Support : session-less
> > >
> > > >
> > >
> > > > Vendor ID : Intelligent Platform Management Interface
> > > forum
> > >
> > > > (7154)
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > address@hidden: ~]# ipmi-sensors --debug
> > >
> > > >
> > >
> > > > Caching SDR repository
> > >
> > > > information: /root/.freeipmi/sdr-cache/sdr-cache-fw.localhost
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > Get SDR Repository Info Request
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > [ 20h] = cmd[ 8b]
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > Get SDR Repository Info Response
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > [ 20h] = cmd[ 8b]
> > >
> > > >
> > >
> > > > [ C1h] = comp_code[ 8b]
> > >
> > > >
> > >
> > > > ipmi_sdr_cache_create: internal IPMI error
> > >
> > > >
> > >
> > > > address@hidden: ~]#
> > >
> > > >
> > >
> > > > address@hidden: ~]# ipmi-sensors --debug --sdr-cache-recreate
> > >
> > > >
> > >
> > > > Caching SDR repository
> > >
> > > > information: /root/.freeipmi/sdr-cache/sdr-cache-fw.localhost
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > Get SDR Repository Info Request
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > [ 20h] = cmd[ 8b]
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > Get SDR Repository Info Response
> > >
> > > >
> > >
> > > > =====================================================
> > >
> > > >
> > >
> > > > [ 20h] = cmd[ 8b]
> > >
> > > >
> > >
> > > > [ C1h] = comp_code[ 8b]
> > >
> > > >
> > >
> > > > ipmi_sdr_cache_create: internal IPMI error
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > address@hidden: ~]# dmidecode
> > >
> > > >
> > >
> > > > # dmidecode 2.12
> > >
> > > >
> > >
> > > > SMBIOS 2.6 present.
> > >
> > > >
> > >
> > > > 27 structures occupying 1582 bytes.
> > >
> > > >
> > >
> > > > Table at 0x000E9140.
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > Handle 0x0000, DMI type 0, 24 bytes
> > >
> > > >
> > >
> > > > BIOS Information
> > >
> > > >
> > >
> > > > Vendor: Emerson
> > >
> > > >
> > >
> > > > Version: 1.1.3
> > >
> > > >
> > >
> > > > Release Date: 10/02/2013
> > >
> > > >
> > >
> > > > Address: 0xF0000
> > >
> > > >
> > >
> > > > Runtime Size: 64 kB
> > >
> > > >
> > >
> > > > ROM Size: 1024 kB
> > >
> > > >
> > >
> > > > Characteristics:
> > >
> > > >
> > >
> > > > PCI is supported
> > >
> > > >
> > >
> > > > PNP is supported
> > >
> > > >
> > >
> > > > BIOS is upgradeable
> > >
> > > >
> > >
> > > > BIOS shadowing is allowed
> > >
> > > >
> > >
> > > > Boot from CD is supported
> > >
> > > >
> > >
> > > > Selectable boot is supported
> > >
> > > >
> > >
> > > > BIOS ROM is socketed
> > >
> > > >
> > >
> > > > EDD is supported
> > >
> > > >
> > >
> > > > 5.25"/1.2 MB floppy services are supported (int 13h)
> > >
> > > >
> > >
> > > > 3.5"/720 kB floppy services are supported (int 13h)
> > >
> > > >
> > >
> > > > 3.5"/2.88 MB floppy services are supported (int 13h)
> > >
> > > >
> > >
> > > > Print screen service is supported (int 5h)
> > >
> > > >
> > >
> > > > 8042 keyboard services are supported (int 9h)
> > >
> > > >
> > >
> > > > Serial services are supported (int 14h)
> > >
> > > >
> > >
> > > > Printer services are supported (int 17h)
> > >
> > > >
> > >
> > > > ACPI is supported
> > >
> > > >
> > >
> > > > USB legacy is supported
> > >
> > > >
> > >
> > > > BIOS boot specification is supported
> > >
> > > >
> > >
> > > > Targeted content distribution is supported
> > >
> > > >
> > >
> > > > BIOS Revision: 4.6
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > Handle 0x0001, DMI type 1, 27 bytes
> > >
> > > >
> > >
> > > > System Information
> > >
> > > >
> > >
> > > > Manufacturer: EMERSON
> > >
> > > >
> > >
> > > > Product Name: PCA,ATCA-7367/0GB/6E
> > >
> > > >
> > >
> > > > Version: REV.B
> > >
> > > >
> > >
> > > > Serial Number: 8571373
> > >
> > > >
> > >
> > > > UUID: 5FB411DF-4000-CE0B-4BFC-2EAF01000100
> > >
> > > >
> > >
> > > > Wake-up Type: Power Switch
> > >
> > > >
> > >
> > > > SKU Number:
> > >
> > > >
> > >
> > > > Family:
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > Handle 0x0002, DMI type 2, 15 bytes
> > >
> > > >
> > >
> > > > Base Board Information
> > >
> > > >
> > >
> > > > Manufacturer: Emerson
> > >
> > > >
> > >
> > > > Product Name: PCA,ATCA-7367/0GB/6E
> > >
> > > >
> > >
> > > > Version: 0106826H04B
> > >
> > > >
> > >
> > > > Serial Number: 8571373
> > >
> > > >
> > >
> > > > Asset Tag:
> > >
> > > >
> > >
> > > > Features:
> > >
> > > >
> > >
> > > > Board is a hosting board
> > >
> > > >
> > >
> > > > Board is removable
> > >
> > > >
> > >
> > > > Board is replaceable
> > >
> > > >
> > >
> > > > Board is hot swappable
> > >
> > > >
> > >
> > > > Location In Chassis:
> > >
> > > >
> > >
> > > > Chassis Handle: 0x0003
> > >
> > > >
> > >
> > > > Type: Server Blade
> > >
> > > >
> > >
> > > > Contained Object Handles: 0
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > Handle 0x0003, DMI type 4, 42 bytes
> > >
> > > >
> > >
> > > > Processor Information
> > >
> > > >
> > >
> > > > Socket Designation: CPU 1
> > >
> > > >
> > >
> > > > Type: Central Processor
> > >
> > > >
> > >
> > > > Family: Xeon
> > >
> > > >
> > >
> > > > Manufacturer: Intel
> > >
> > > >
> > >
> > > > ID: C2 06 02 00 FF FB EB BF
> > >
> > > >
> > >
> > > > Signature: Type 0, Family 6, Model 44, Stepping 2
> > >
> > > >
> > >
> > > > Flags:
> > >
> > > >
> > >
> > > > FPU (Floating-point unit on-chip)
> > >
> > > >
> > >
> > > > VME (Virtual mode extension)
> > >
> > > >
> > >
> > > > DE (Debugging extension)
> > >
> > > >
> > >
> > > > PSE (Page size extension)
> > >
> > > >
> > >
> > > > TSC (Time stamp counter)
> > >
> > > >
> > >
> > > > MSR (Model specific registers)
> > >
> > > >
> > >
> > > > PAE (Physical address extension)
> > >
> > > >
> > >
> > > > MCE (Machine check exception)
> > >
> > > >
> > >
> > > > CX8 (CMPXCHG8 instruction supported)
> > >
> > > >
> > >
> > > > APIC (On-chip APIC hardware supported)
> > >
> > > >
> > >
> > > > SEP (Fast system call)
> > >
> > > >
> > >
> > > > MTRR (Memory type range registers)
> > >
> > > >
> > >
> > > > PGE (Page global enable)
> > >
> > > >
> > >
> > > > MCA (Machine check architecture)
> > >
> > > >
> > >
> > > > CMOV (Conditional move instruction supported)
> > >
> > > >
> > >
> > > > PAT (Page attribute table)
> > >
> > > >
> > >
> > > > PSE-36 (36-bit page size extension)
> > >
> > > >
> > >
> > > > CLFSH (CLFLUSH instruction supported)
> > >
> > > >
> > >
> > > > DS (Debug store)
> > >
> > > >
> > >
> > > > ACPI (ACPI supported)
> > >
> > > >
> > >
> > > > MMX (MMX technology supported)
> > >
> > > >
> > >
> > > > FXSR (FXSAVE and FXSTOR instructions supported)
> > >
> > > >
> > >
> > > > SSE (Streaming SIMD extensions)
> > >
> > > >
> > >
> > > > SSE2 (Streaming SIMD extensions 2)
> > >
> > > >
> > >
> > > > SS (Self-snoop)
> > >
> > > >
> > >
> > > > HTT (Multi-threading)
> > >
> > > >
> > >
> > > > TM (Thermal monitor supported)
> > >
> > > >
> > >
> > > > PBE (Pending break enabled)
> > >
> > > >
> > >
> > > > Version: Intel(R) Xeon(R) CPU L5638 @ 2.00GHz
> > >
> > > >
> > >
> > > > Voltage: 0.0 V
> > >
> > > >
> > >
> > > > External Clock: 533 MHz
> > >
> > > >
> > >
> > > > Max Speed: 4000 MHz
> > >
> > > >
> > >
> > > > Current Speed: 1995 MHz
> > >
> > > >
> > >
> > > > Status: Populated, Enabled
> > >
> > > >
> > >
> > > > Upgrade: Socket LGA1366
> > >
> > > >
> > >
> > > > L1 Cache Handle: 0x0004
> > >
> > > >
> > >
> > > > L2 Cache Handle: 0x0005
> > >
> > > >
> > >
> > > > L3 Cache Handle: 0x0006
> > >
> > > >
> > >
> > > > Serial Number:
> > >
> > > >
> > >
> > > > Asset Tag:
> > >
> > > >
> > >
> > > > Part Number:
> > >
> > > >
> > >
> > > > Core Count: 6
> > >
> > > >
> > >
> > > > Core Enabled: 6
> > >
> > > >
> > >
> > > > Thread Count: 12
> > >
> > > >
> > >
> > > > Characteristics:
> > >
> > > >
> > >
> > > > 64-bit capable
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > Handle 0x0004, DMI type 7, 19 bytes
> > >
> > > >
> > >
> > > > Cache Information
> > >
> > > >
> > >
> > > > Socket Designation: L1-Cache
> > >
> > > >
> > >
> > > > Configuration: Enabled, Not Socketed, Level 1
> > >
> > > >
> > >
> > > > Operational Mode: Write Back
> > >
> > > >
> > >
> > > > Location: Internal
> > >
> > > >
> > >
> > > > Installed Size: 32 kB
> > >
> > > >
> > >
> > > > Maximum Size: 32 kB
> > >
> > > >
> > >
> > > > Supported SRAM Types:
> > >
> > > >
> > >
> > > > Other
> > >
> > > >
> > >
> > > > Installed SRAM Type: Other
> > >
> > > >
> > >
> > > > Speed: Unknown
> > >
> > > >
> > >
> > > > Error Correction Type: None
> > >
> > > >
> > >
> > > > System Type: Unified
> > >
> > > >
> > >
> > > > Associativity: 4-way Set-associative
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > Handle 0x0005, DMI type 7, 19 bytes
> > >
> > > >
> > >
> > > > Cache Information
> > >
> > > >
> > >
> > > > Socket Designation: L2-Cache
> > >
> > > >
> > >
> > > > Configuration: Enabled, Not Socketed, Level 2
> > >
> > > >
> > >
> > > > Operational Mode: Varies With Memory Address
> > >
> > > >
> > >
> > > > Location: Internal
> > >
> > > >
> > >
> > > > Installed Size: 256 kB
> > >
> > > >
> > >
> > > > Maximum Size: 256 kB
> > >
> > > >
> > >
> > > > Supported SRAM Types:
> > >
> > > >
> > >
> > > > Other
> > >
> > > >
> > >
> > > > Installed SRAM Type: Other
> > >
> > > >
> > >
> > > > Speed: Unknown
> > >
> > > >
> > >
> > > > Error Correction Type: None
> > >
> > > >
> > >
> > > > System Type: Unified
> > >
> > > >
> > >
> > > > Associativity: 8-way Set-associative
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > Handle 0x0006, DMI type 7, 19 bytes
> > >
> > > >
> > >
> > > > Cache Information
> > >
> > > >
> > >
> > > > Socket Designation: L3-Cache
> > >
> > > >
> > >
> > > > Configuration: Disabled, Not Socketed, Level 3
> > >
> > > >
> > >
> > > > Operational Mode: Unknown
> > >
> > > >
> > >
> > > > Location: Internal
> > >
> > > >
> > >
> > > > Installed Size: 12288 kB
> > >
> > > >
> > >
> > > > Maximum Size: 12288 kB
> > >
> > > >
> > >
> > > > Supported SRAM Types:
> > >
> > > >
> > >
> > > > Other
> > >
> > > >
> > >
> > > > Installed SRAM Type: Other
> > >
> > > >
> > >
> > > > Speed: Unknown
> > >
> > > >
> > >
> > > > Error Correction Type: None
> > >
> > > >
> > >
> > > > System Type: Unified
> > >
> > > >
> > >
> > > > Associativity: 16-way Set-associative
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > Handle 0x0008, DMI type 12, 5 bytes
> > >
> > > >
> > >
> > > > System Configuration Options
> > >
> > > >
> > >
> > > > Option 1: To Be Filled By O.E.M.
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > Handle 0x0009, DMI type 13, 22 bytes
> > >
> > > >
> > >
> > > > BIOS Language Information
> > >
> > > >
> > >
> > > > Language Description Format: Long
> > >
> > > >
> > >
> > > > Installable Languages: 1
> > >
> > > >
> > >
> > > > en|US|iso8859-1
> > >
> > > >
> > >
> > > > Currently Installed Language: en|US|iso8859-1
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > Handle 0x000A, DMI type 16, 15 bytes
> > >
> > > >
> > >
> > > > Physical Memory Array
> > >
> > > >
> > >
> > > > Location: System Board Or Motherboard
> > >
> > > >
> > >
> > > > Use: System Memory
> > >
> > > >
> > >
> > > > Error Correction Type: Single-bit ECC
> > >
> > > >
> > >
> > > > Maximum Capacity: 96 GB
> > >
> > > >
> > >
> > > > Error Information Handle: Not Provided
> > >
> > > >
> > >
> > > > Number Of Devices: 6
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > Handle 0x000B, DMI type 19, 15 bytes
> > >
> > > >
> > >
> > > > Memory Array Mapped Address
> > >
> > > >
> > >
> > > > Starting Address: 0x00000000000
> > >
> > > >
> > >
> > > > Ending Address: 0x005FFFFFFFF
> > >
> > > >
> > >
> > > > Range Size: 24 GB
> > >
> > > >
> > >
> > > > Physical Array Handle: 0x000A
> > >
> > > >
> > >
> > > > Partition Width: 18
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > Handle 0x000C, DMI type 17, 28 bytes
> > >
> > > >
> > >
> > > > Memory Device
> > >
> > > >
> > >
> > > > Array Handle: 0x000A
> > >
> > > >
> > >
> > > > Error Information Handle: Not Provided
> > >
> > > >
> > >
> > > > Total Width: 72 bits
> > >
> > > >
> > >
> > > > Data Width: 64 bits
> > >
> > > >
> > >
> > > > Size: 4096 MB
> > >
> > > >
> > >
> > > > Form Factor: DIMM
> > >
> > > >
> > >
> > > > Set: 1
> > >
> > > >
> > >
> > > > Locator: DIMM_Socket_P01
> > >
> > > >
> > >
> > > > Bank Locator: DIMM_CPU#0
> > >
> > > >
> > >
> > > > Type: DDR3
> > >
> > > >
> > >
> > > > Type Detail: Synchronous
> > >
> > > >
> > >
> > > > Speed: 1333 MHz
> > >
> > > >
> > >
> > > > Manufacturer: Samsung
> > >
> > > >
> > >
> > > > Serial Number: 34FA4761
> > >
> > > >
> > >
> > > > Asset Tag:
> > >
> > > >
> > >
> > > > Part Number: M392B5273DH0-CH9
> > >
> > > >
> > >
> > > > Rank: 2
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > Handle 0x000D, DMI type 20, 19 bytes
> > >
> > > >
> > >
> > > > Memory Device Mapped Address
> > >
> > > >
> > >
> > > > Starting Address: 0x00000000000
> > >
> > > >
> > >
> > > > Ending Address: 0x000FFFFFFFF
> > >
> > > >
> > >
> > > > Range Size: 4 GB
> > >
> > > >
> > >
> > > > Physical Device Handle: 0x000C
> > >
> > > >
> > >
> > > > Memory Array Mapped Address Handle: 0x000B
> > >
> > > >
> > >
> > > > Partition Row Position: Unknown
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > Handle 0x000E, DMI type 17, 28 bytes
> > >
> > > >
> > >
> > > > Memory Device
> > >
> > > >
> > >
> > > > Array Handle: 0x000A
> > >
> > > >
> > >
> > > > Error Information Handle: Not Provided
> > >
> > > >
> > >
> > > > Total Width: 72 bits
> > >
> > > >
> > >
> > > > Data Width: 64 bits
> > >
> > > >
> > >
> > > > Size: 4096 MB
> > >
> > > >
> > >
> > > > Form Factor: DIMM
> > >
> > > >
> > >
> > > > Set: 2
> > >
> > > >
> > >
> > > > Locator: DIMM_Socket_P02
> > >
> > > >
> > >
> > > > Bank Locator: DIMM_CPU#0
> > >
> > > >
> > >
> > > > Type: DDR3
> > >
> > > >
> > >
> > > > Type Detail: Synchronous
> > >
> > > >
> > >
> > > > Speed: 1333 MHz
> > >
> > > >
> > >
> > > > Manufacturer: Samsung
> > >
> > > >
> > >
> > > > Serial Number: 34FA465E
> > >
> > > >
> > >
> > > > Asset Tag:
> > >
> > > >
> > >
> > > > Part Number: M392B5273DH0-CH9
> > >
> > > >
> > >
> > > > Rank: 2
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > Handle 0x000F, DMI type 20, 19 bytes
> > >
> > > >
> > >
> > > > Memory Device Mapped Address
> > >
> > > >
> > >
> > > > Starting Address: 0x00100000000
> > >
> > > >
> > >
> > > > Ending Address: 0x001FFFFFFFF
> > >
> > > >
> > >
> > > > Range Size: 4 GB
> > >
> > > >
> > >
> > > > Physical Device Handle: 0x000E
> > >
> > > >
> > >
> > > > Memory Array Mapped Address Handle: 0x000B
> > >
> > > >
> > >
> > > > Partition Row Position: Unknown
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > Handle 0x0010, DMI type 17, 28 bytes
> > >
> > > >
> > >
> > > > Memory Device
> > >
> > > >
> > >
> > > > Array Handle: 0x000A
> > >
> > > >
> > >
> > > > Error Information Handle: Not Provided
> > >
> > > >
> > >
> > > > Total Width: 72 bits
> > >
> > > >
> > >
> > > > Data Width: 64 bits
> > >
> > > >
> > >
> > > > Size: 4096 MB
> > >
> > > >
> > >
> > > > Form Factor: DIMM
> > >
> > > >
> > >
> > > > Set: 4
> > >
> > > >
> > >
> > > > Locator: DIMM_Socket_P03
> > >
> > > >
> > >
> > > > Bank Locator: DIMM_CPU#0
> > >
> > > >
> > >
> > > > Type: DDR3
> > >
> > > >
> > >
> > > > Type Detail: Synchronous
> > >
> > > >
> > >
> > > > Speed: 1333 MHz
> > >
> > > >
> > >
> > > > Manufacturer: Samsung
> > >
> > > >
> > >
> > > > Serial Number: 34FA4665
> > >
> > > >
> > >
> > > > Asset Tag:
> > >
> > > >
> > >
> > > > Part Number: M392B5273DH0-CH9
> > >
> > > >
> > >
> > > > Rank: 2
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > Handle 0x0011, DMI type 20, 19 bytes
> > >
> > > >
> > >
> > > > Memory Device Mapped Address
> > >
> > > >
> > >
> > > > Starting Address: 0x00200000000
> > >
> > > >
> > >
> > > > Ending Address: 0x002FFFFFFFF
> > >
> > > >
> > >
> > > > Range Size: 4 GB
> > >
> > > >
> > >
> > > > Physical Device Handle: 0x0010
> > >
> > > >
> > >
> > > > Memory Array Mapped Address Handle: 0x000B
> > >
> > > >
> > >
> > > > Partition Row Position: Unknown
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > Handle 0x0012, DMI type 17, 28 bytes
> > >
> > > >
> > >
> > > > Memory Device
> > >
> > > >
> > >
> > > > Array Handle: 0x000A
> > >
> > > >
> > >
> > > > Error Information Handle: Not Provided
> > >
> > > >
> > >
> > > > Total Width: 72 bits
> > >
> > > >
> > >
> > > > Data Width: 64 bits
> > >
> > > >
> > >
> > > > Size: 4096 MB
> > >
> > > >
> > >
> > > > Form Factor: DIMM
> > >
> > > >
> > >
> > > > Set: 5
> > >
> > > >
> > >
> > > > Locator: DIMM_Socket_P04
> > >
> > > >
> > >
> > > > Bank Locator: DIMM_CPU#0
> > >
> > > >
> > >
> > > > Type: DDR3
> > >
> > > >
> > >
> > > > Type Detail: Synchronous
> > >
> > > >
> > >
> > > > Speed: 1333 MHz
> > >
> > > >
> > >
> > > > Manufacturer: Samsung
> > >
> > > >
> > >
> > > > Serial Number: 34FA46D1
> > >
> > > >
> > >
> > > > Asset Tag:
> > >
> > > >
> > >
> > > > Part Number: M392B5273DH0-CH9
> > >
> > > >
> > >
> > > > Rank: 2
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > Handle 0x0013, DMI type 20, 19 bytes
> > >
> > > >
> > >
> > > > Memory Device Mapped Address
> > >
> > > >
> > >
> > > > Starting Address: 0x00300000000
> > >
> > > >
> > >
> > > > Ending Address: 0x003FFFFFFFF
> > >
> > > >
> > >
> > > > Range Size: 4 GB
> > >
> > > >
> > >
> > > > Physical Device Handle: 0x0012
> > >
> > > >
> > >
> > > > Memory Array Mapped Address Handle: 0x000B
> > >
> > > >
> > >
> > > > Partition Row Position: Unknown
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > Handle 0x0014, DMI type 17, 28 bytes
> > >
> > > >
> > >
> > > > Memory Device
> > >
> > > >
> > >
> > > > Array Handle: 0x000A
> > >
> > > >
> > >
> > > > Error Information Handle: Not Provided
> > >
> > > >
> > >
> > > > Total Width: 72 bits
> > >
> > > >
> > >
> > > > Data Width: 64 bits
> > >
> > > >
> > >
> > > > Size: 4096 MB
> > >
> > > >
> > >
> > > > Form Factor: DIMM
> > >
> > > >
> > >
> > > > Set: 7
> > >
> > > >
> > >
> > > > Locator: DIMM_Socket_P05
> > >
> > > >
> > >
> > > > Bank Locator: DIMM_CPU#0
> > >
> > > >
> > >
> > > > Type: DDR3
> > >
> > > >
> > >
> > > > Type Detail: Synchronous
> > >
> > > >
> > >
> > > > Speed: 1333 MHz
> > >
> > > >
> > >
> > > > Manufacturer: Samsung
> > >
> > > >
> > >
> > > > Serial Number: 34FA4735
> > >
> > > >
> > >
> > > > Asset Tag:
> > >
> > > >
> > >
> > > > Part Number: M392B5273DH0-CH9
> > >
> > > >
> > >
> > > > Rank: 2
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > Handle 0x0015, DMI type 20, 19 bytes
> > >
> > > >
> > >
> > > > Memory Device Mapped Address
> > >
> > > >
> > >
> > > > Starting Address: 0x00400000000
> > >
> > > >
> > >
> > > > Ending Address: 0x004FFFFFFFF
> > >
> > > >
> > >
> > > > Range Size: 4 GB
> > >
> > > >
> > >
> > > > Physical Device Handle: 0x0014
> > >
> > > >
> > >
> > > > Memory Array Mapped Address Handle: 0x000B
> > >
> > > >
> > >
> > > > Partition Row Position: Unknown
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > Handle 0x0016, DMI type 17, 28 bytes
> > >
> > > >
> > >
> > > > Memory Device
> > >
> > > >
> > >
> > > > Array Handle: 0x000A
> > >
> > > >
> > >
> > > > Error Information Handle: Not Provided
> > >
> > > >
> > >
> > > > Total Width: 72 bits
> > >
> > > >
> > >
> > > > Data Width: 64 bits
> > >
> > > >
> > >
> > > > Size: 4096 MB
> > >
> > > >
> > >
> > > > Form Factor: DIMM
> > >
> > > >
> > >
> > > > Set: 8
> > >
> > > >
> > >
> > > > Locator: DIMM_Socket_P06
> > >
> > > >
> > >
> > > > Bank Locator: DIMM_CPU#0
> > >
> > > >
> > >
> > > > Type: DDR3
> > >
> > > >
> > >
> > > > Type Detail: Synchronous
> > >
> > > >
> > >
> > > > Speed: 1333 MHz
> > >
> > > >
> > >
> > > > Manufacturer: Samsung
> > >
> > > >
> > >
> > > > Serial Number: 34FA475A
> > >
> > > >
> > >
> > > > Asset Tag:
> > >
> > > >
> > >
> > > > Part Number: M392B5273DH0-CH9
> > >
> > > >
> > >
> > > > Rank: 2
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > Handle 0x0017, DMI type 20, 19 bytes
> > >
> > > >
> > >
> > > > Memory Device Mapped Address
> > >
> > > >
> > >
> > > > Starting Address: 0x00500000000
> > >
> > > >
> > >
> > > > Ending Address: 0x005FFFFFFFF
> > >
> > > >
> > >
> > > > Range Size: 4 GB
> > >
> > > >
> > >
> > > > Physical Device Handle: 0x0016
> > >
> > > >
> > >
> > > > Memory Array Mapped Address Handle: 0x000B
> > >
> > > >
> > >
> > > > Partition Row Position: Unknown
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > Handle 0x0018, DMI type 32, 20 bytes
> > >
> > > >
> > >
> > > > System Boot Information
> > >
> > > >
> > >
> > > > Status: No errors detected
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > Handle 0x0019, DMI type 38, 18 bytes
> > >
> > > >
> > >
> > > > IPMI Device Information
> > >
> > > >
> > >
> > > > Interface Type: KCS (Keyboard Control Style)
> > >
> > > >
> > >
> > > > Specification Version: 2.0
> > >
> > > >
> > >
> > > > I2C Slave Address: 0x4e
> > >
> > > >
> > >
> > > > NV Storage Device: Not Present
> > >
> > > >
> > >
> > > > Base Address: 0x0000000000000CA2 (I/O)
> > >
> > > >
> > >
> > > > Register Spacing: Successive Byte Boundaries
> > >
> > > >
> > >
> > > > Interrupt Number: 6
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > Handle 0x0007, DMI type 11, 5 bytes
> > >
> > > >
> > >
> > > > OEM Strings
> > >
> > > >
> > >
> > > > String 1: $RC$.@
> > >
> > > >
> > >
> > > > String 2: Last Reset Cause: PowerOn, CPU, IPMI
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > Handle 0x001A, DMI type 127, 4 bytes
> > >
> > > >
> > >
> > > > End Of Table
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > address@hidden: ~]#
> > >
> > > --
> > >
> > > Albert Chu
> > >
> > > address@hidden
> > >
> > > Computer Scientist
> > >
> > > High Performance Systems Division
> > >
> > > Lawrence Livermore National Laboratory
> > >
> > >
> > >
> > >
> > >
> > >
> > --
> > Albert Chu
> > address@hidden
> > Computer Scientist
> > High Performance Systems Division
> > Lawrence Livermore National Laboratory
> >
> >
> >
> --
> Albert Chu
> address@hidden
> Computer Scientist
> High Performance Systems Division
> Lawrence Livermore National Laboratory
>
>
>
> _______________________________________________
> Freeipmi-users mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/freeipmi-users
>