[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Freeipmi-users] DIMM RAM has no state
From: |
Albert Chu |
Subject: |
Re: [Freeipmi-users] DIMM RAM has no state |
Date: |
Fri, 11 Apr 2014 09:59:54 -0700 |
On Fri, 2014-04-11 at 02:21 +0200, ashka wrote:
> Hi,
>
> I'm having some trouble with FreeIPMI, when I run ipmi-sensors a list of
> sensors is returned with its state, this list can be found below.
> The issue I am having is that nothing says that a RAM module might be
> defective, but if I go on the KVM interface, I might find this info in
> its log, something along the lines of "Uncorrectable DIMM error was
> asserted on C0".
> How can I either get the state in the list, or the log of the IPMI board
> ? My server is a Dell Poweredge C1100.
I believe the log you're referring to is the system event log, or SEL.
It can be output via the ipmi-sel tool.
Al
>
> Sensor list:
> > ID | Name | Type | Reading | Units |
> > Event
> > 2 | P5V | Voltage | 5.02 | V | 'OK'
> > 3 | P1V8_AUX | Voltage | 1.80 | V | 'OK'
> > 4 | P12V | Voltage | 12.22 | V | 'OK'
> > 5 | MB Temp | Temperature | 44.00 | C | 'OK'
> > 6 | FP Temp | Temperature | 23.00 | C | 'OK'
> > 7 | BP Temp | Temperature | 24.00 | C | 'OK'
> > 8 | CPU0 Temp | Temperature | 78.00 | C | 'OK'
> > 9 | CPU1 Temp | Temperature | 75.00 | C | 'OK'
> > 10 | DIMM Temp | Temperature | 66.00 | C | 'OK'
> > 12 | Power Unit | Power Unit | N/A | N/A | 'OK'
> > 13 | PSU Redundancy | Power Supply | N/A | N/A | N/A
> > 15 | Critical IRQ | Critical Interrupt | N/A | N/A | 'OK'
> > 18 | System FAN6_1 | Fan | 4200.00 | RPM | 'OK'
> > 19 | System FAN6_2 | Fan | 4600.00 | RPM | 'OK'
> > 20 | System FAN5_1 | Fan | 4300.00 | RPM | 'OK'
> > 21 | System FAN5_2 | Fan | 4700.00 | RPM | 'OK'
> > 22 | System FAN4_1 | Fan | 4200.00 | RPM | 'OK'
> > 23 | System FAN4_2 | Fan | 5000.00 | RPM | 'OK'
> > 24 | System FAN3_1 | Fan | 4400.00 | RPM | 'OK'
> > 25 | System FAN3_2 | Fan | 4800.00 | RPM | 'OK'
> > 26 | System FAN2_1 | Fan | 4500.00 | RPM | 'OK'
> > 27 | System FAN2_2 | Fan | 4500.00 | RPM | 'OK'
> > 28 | System FAN1 | Fan | 6400.00 | RPM | 'OK'
> > 29 | P1V5_ICH | Voltage | 1.51 | V | 'OK'
> > 30 | P3V3 | Voltage | 3.31 | V | 'OK'
> > 31 | P3V3_STBY | Voltage | 3.31 | V | 'OK'
> > 32 | PROCESSOR1 | Processor | N/A | N/A |
> > 'Processor Presence detected'
> > 33 | PROCESSOR0 | Processor | N/A | N/A |
> > 'Processor Presence detected'
> > 34 | IOH_THERMTRIP | Temperature | N/A | N/A | 'OK'
> > 35 | PROC_HOT0 | Temperature | N/A | N/A | 'OK'
> > 36 | PROC_HOT1 | Temperature | N/A | N/A | 'OK'
> > 37 | IOH Temp | Temperature | 59.00 | C | 'OK'
> > 38 | BMC Watchdog | Watchdog 2 | N/A | N/A | 'OK'
> > 39 | BMC SEL | Event Logging Disabled | N/A | N/A | N/A
> > 40 | System Event | System Event | N/A | N/A | 'OK'
> > 41 | Button | Button/Switch | N/A | N/A | 'OK'
> > 42 | DIMM_A0 | Memory | N/A | N/A | N/A
> > 43 | DIMM_A1 | Memory | N/A | N/A | N/A
> > 44 | DIMM_A2 | Memory | N/A | N/A | N/A
> > 45 | DIMM_B0 | Memory | N/A | N/A | N/A
> > 46 | DIMM_B1 | Memory | N/A | N/A | N/A
> > 47 | DIMM_B2 | Memory | N/A | N/A | N/A
> > 48 | DIMM_C0 | Memory | N/A | N/A | N/A
> > 49 | DIMM_C1 | Memory | N/A | N/A | N/A
> > 50 | DIMM_C2 | Memory | N/A | N/A | N/A
> > 51 | DIMM_D0 | Memory | N/A | N/A | N/A
> > 52 | DIMM_D1 | Memory | N/A | N/A | N/A
> > 53 | DIMM_D2 | Memory | N/A | N/A | N/A
> > 54 | DIMM_E0 | Memory | N/A | N/A | N/A
> > 55 | DIMM_E1 | Memory | N/A | N/A | N/A
> > 56 | DIMM_E2 | Memory | N/A | N/A | N/A
> > 57 | DIMM_F0 | Memory | N/A | N/A | N/A
> > 58 | DIMM_F1 | Memory | N/A | N/A | N/A
> > 59 | DIMM_F2 | Memory | N/A | N/A | N/A
> > 61 | PCIE Error | Critical Interrupt | N/A | N/A | N/A
> > 62 | QPI Error | Critical Interrupt | N/A | N/A | N/A
> > 63 | Internal Error | System Firmware Progress | N/A | N/A | N/A
> > 64 | POST Error | System Firmware Progress | N/A | N/A | N/A
> > 65 | NM Capabilities | OEM Reserved | N/A | N/A | N/A
> > 68 | Mirror Mode | Memory | N/A | N/A | N/A
> > 69 | MRC Event | Memory | N/A | N/A | N/A
> > 71 | PROC_IERR_STATUS | Processor | N/A | N/A | 'OK'
> > 72 | Session Audit | Session Audit | N/A | N/A | 'OK'
> > 74 | PS1 Status | Power Supply | N/A | N/A | N/A
> > 75 | PS2 Status | Power Supply | N/A | N/A | N/A
> > 76 | NMI | Critical Interrupt | N/A | N/A | N/A
>
> Thanks for any future answer.
>
> All the best
>
> _______________________________________________
> Freeipmi-users mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/freeipmi-users
--
Albert Chu
address@hidden
Computer Scientist
High Performance Systems Division
Lawrence Livermore National Laboratory