Hi Albert,
Works just perfekt.
Here is a list of our other Supermicro board:
Supermicro X7DB8 10437:4
Supermicro X8DTN 10437:4
Supermicro X8DTL 47488:6
Supermicro X9SCL/X9SCM 47488:1572
Supermicro X7SBi-LN4 5593:4404
Supermicro X7SBi-LN4 10437:4
Supermicro X8DTL 5593:6
Supermicro X8DTN+-F 47488:1551
10437: Peppercon AG
47488: Super Micro Computer Inc.
5593: Magnum Technologies Inc.
/glz
--On September 19, 2011 11:14:48 -0700 Albert Chu <address@hidden> wrote:
> Hi Goran,
>
> Unfortunately that's not how freeipmi_interpret_sensor.conf works.
> That conf file is for use with the --output-sensor-state option. (In
> hindsight, I now see the overloading of the word 'interpret' may be
> confusing).
>
> I went ahead and added your motherboard into this beta of FreeIPMI, can
> you see if it works? You'll still need to specify
> --interpret-oem-data. You may also want to run --output-sensor-state
> to see if that brings up an interpretation for those events too.
>
> http://download.gluster.com/pub/freeipmi/qa-release/freeipmi-1.0.7.bet
> a3. tar.gz
>
> In addition, you may be interested in the --ignore-unrecognized-events
> option to eliminate all those unrecognized events.
>
> Thanks,
> Al
>
> On Mon, 2011-09-19 at 02:44 -0700, Goran Lowkrantz wrote:
>> I am trying to add the CPU Temp sensors output from our Supermicro
>> servers to freeipmi_interpret_sensor.conf but I can't get it working.
>> As we have quite a few, I would like to get them working so I started
>> with this.
>>
>> The server I am testing on has a X8DTN+-F motherboard, below is the
>> dmidecode output. We are running FreeBSD amd64 8.2-STABLE with
>> FreeIPMI 1.0.6. All files are in the default location
>> /usr/local/etc/freeipmi
>>
>> Handle 0x0001, DMI type 1, 27 bytes
>> System Information
>> Manufacturer: Supermicro
>> Product Name: X8DTN+-F
>> Version: 1234567890
>> Serial Number: 1234567890
>> UUID: 25091011-3C00-C25E-8922-003048F7A292
>> Wake-up Type: Power Switch
>> SKU Number: 1234567890
>> Family: Server
>>
>> Using bcm-info gives the following output:
>> # bmc-info
>> Device ID : 32
>> Device Revision : 1
>> Device SDRs : unsupported
>> Firmware Revision : 2.04
>> Device Available : yes (normal operation)
>> IPMI Version : 2.0
>> Sensor Device : supported
>> SDR Repository Device : supported
>> SEL Device : supported
>> FRU Inventory Device : supported
>> IPMB Event Receiver : supported
>> IPMB Event Generator : supported
>> Bridge : unsupported
>> Chassis Device : supported
>> Manufacturer ID : Super Micro Computer Inc. (47488)
>> Product ID : 1551
>>
>> GUID : 00000000-0000-0000-0000-000000000000
>>
>> Channel Information
>>
>> Channel Number : 0
>> Medium Type : IPMB (I2C)
>> Protocol Type : IPMB-1.0
>> Active Session Count : 0
>> Session Support : session-less
>> Vendor ID : Intelligent Platform Management Interface forum
>> (7154)
>>
>> Channel Number : 1
>> Medium Type : 802.3 LAN
>> Protocol Type : IPMB-1.0
>> Active Session Count : 0
>> Session Support : multi-session
>> Vendor ID : Intelligent Platform Management Interface forum
>> (7154)
>>
>> Channel Number : 3
>> Medium Type : Asynch. Serial/Modem (RS-232)
>> Protocol Type : IPMB-1.0
>> Active Session Count : 0
>> Session Support : single-session
>> Vendor ID : Intelligent Platform Management Interface forum
>> (7154)
>>
>> Channel Number : 5
>> Medium Type : IPMB (I2C)
>> Protocol Type : IPMB-1.0
>> Active Session Count : 0
>> Session Support : session-less
>> Vendor ID : Intelligent Platform Management Interface forum
>> (7154)
>>
>> So I would expect the id to be 47488:1551
>>
>> Verbose output of ipmi-sensors for the two sensors:
>> Record ID: 1277
>> ID String: CPU1 Temp
>> Sensor Type: OEM Reserved (C0h)
>> Sensor Number: 82
>> IPMB Slave Address: 10h
>> Sensor Owner ID: 20h
>> Sensor Owner LUN: 0h
>> Channel Number: 0h
>> Entity ID: system board (7)
>> Entity Instance: 1
>> Entity Instance Type: Physical Entity
>> Event/Reading Type Code: 70h
>> Sensor Event: 'OEM Event = 0000h'
>>
>> Record ID: 1344
>> ID String: CPU2 Temp
>> Sensor Type: OEM Reserved (C0h)
>> Sensor Number: 81
>> IPMB Slave Address: 10h
>> Sensor Owner ID: 20h
>> Sensor Owner LUN: 0h
>> Channel Number: 0h
>> Entity ID: system board (7)
>> Entity Instance: 2
>> Entity Instance Type: Physical Entity
>> Event/Reading Type Code: 70h
>> Sensor Event: 'OEM Event = 0000h'
>>
>> This shows the event code as 0x70 and the sensor type as 0xc0.
>>
>> Here are the lines I have added for the test and these are the only
>> lines not commented in the file:
>>
>> IPMI_OEM_Value 47488:1551 0x70 0xC0 0x0000 Nominal
>> IPMI_OEM_Value 47488:1551 0x70 0xC0 0x0001 Warning
>> IPMI_OEM_Value 47488:1551 0x70 0xC0 0x0002 Warning
>> IPMI_OEM_Value 47488:1551 0x70 0xC0 0x0004 Critical
>> IPMI_OEM_Value 47488:1551 0x70 0xC0 0x0007 Warning
>>
>> But I still get this:
>> # ipmi-sensors --interpret-oem-data
>> ID | Name | Type | Reading | Units | Event
>> 4 | FAN 1 | Fan | N/A | RPM | N/A
>> 71 | FAN 2 | Fan | 4096.00 | RPM | 'OK'
>> 138 | FAN 3 | Fan | 4356.00 | RPM | 'OK'
>> 205 | FAN 4 | Fan | 4356.00 | RPM | 'OK'
>> 272 | FAN 5 | Fan | N/A | RPM | N/A
>> 339 | FAN 6 | Fan | N/A | RPM | N/A
>> 406 | FAN 7 | Fan | N/A | RPM | N/A
>> 473 | FAN 8 | Fan | N/A | RPM | N/A
>> 540 | CPU1 Vcore | Voltage | 1.01 | V | 'OK'
>> 607 | CPU2 Vcore | Voltage | 1.10 | V | 'OK'
>> 674 | +1.5 V | Voltage | 1.52 | V | 'OK'
>> 741 | +5 V | Voltage | 5.09 | V | 'OK'
>> 808 | +5VSB | Voltage | 5.06 | V | 'OK'
>> 875 | +12 V | Voltage | 12.19 | V | 'OK'
>> 942 | CPU1 DIMM | Voltage | 1.54 | V | 'OK'
>> 1009 | CPU2 DIMM | Voltage | 1.54 | V | 'OK'
>> 1076 | +3.3VCC | Voltage | 3.26 | V | 'OK'
>> 1143 | +3.3VSB | Voltage | 3.22 | V | 'OK'
>> 1210 | VBAT | Voltage | 3.19 | V | 'OK'
>> 1277 | CPU1 Temp | OEM Reserved | N/A | N/A | 'OEM
>> Event = 0000h'
>> 1344 | CPU2 Temp | OEM Reserved | N/A | N/A | 'OEM
>> Event = 0000h'
>> 1411 | System Temp | Temperature | 21.00 | C | 'OK'
>> 1478 | P1-DIMM1A | Temperature | 33.00 | C | 'OK'
>> 1545 | P1-DIMM1B | Temperature | 32.00 | C | 'OK'
>> 1612 | P1-DIMM1C | Temperature | N/A | C | N/A
>> 1679 | P1-DIMM2A | Temperature | 36.00 | C | 'OK'
>> 1746 | P1-DIMM2B | Temperature | 34.00 | C | 'OK'
>> 1813 | P1-DIMM2C | Temperature | N/A | C | N/A
>> 1880 | P1-DIMM3A | Temperature | 36.00 | C | 'OK'
>> 1947 | P1-DIMM3B | Temperature | 36.00 | C | 'OK'
>> 2014 | P1-DIMM3C | Temperature | N/A | C | N/A
>> 2081 | P2-DIMM1A | Temperature | 30.00 | C | 'OK'
>> 2148 | P2-DIMM1B | Temperature | 28.00 | C | 'OK'
>> 2215 | P2-DIMM1C | Temperature | N/A | C | N/A
>> 2282 | P2-DIMM2A | Temperature | 27.00 | C | 'OK'
>> 2349 | P2-DIMM2B | Temperature | 27.00 | C | 'OK'
>> 2416 | P2-DIMM2C | Temperature | N/A | C | N/A
>> 2483 | P2-DIMM3A | Temperature | 27.00 | C | 'OK'
>> 2550 | P2-DIMM3B | Temperature | 28.00 | C | 'OK'
>> 2617 | P2-DIMM3C | Temperature | N/A | C | N/A
>> 2684 | Chassis Intru | Physical Security | N/A | N/A | 'OK'
>> 2751 | PS Status | Power Supply | N/A | N/A |
>> 'Presence detected' 'Unrecognized Event = 0100h' 'Unrecognized Event
>> = 0200h' 'Unrecognized Event = 0400h' 'Unrecognized Event = 0800h'
>> 'Unrecognized Event = 1000h' 'Unrecognized Event = 2000h'
>> 'Unrecognized Event = 4000h'
>>
>> Is there any trick that I have just missed to get the config file
>> active?
>>
>> /glz
>>
>>
>> ................................................... the future
>> isMobile
>>
>> Goran Lowkrantz <address@hidden>
>> System Architect, isMobile AB
>> Sandviksgatan 81, PO Box 58, S-971 03 LuleƄ, Sweden
>> Mobile: +46(0)70-587 87 82
>> http://www.ismobile.com
>> ...............................................
>>
>> _______________________________________________
>> Freeipmi-users mailing list
>> address@hidden
>> https://lists.gnu.org/mailman/listinfo/freeipmi-users
> --
> Albert Chu
> address@hidden
> Computer Scientist
> High Performance Systems Division
> Lawrence Livermore National Laboratory
>
>
................................................... the future isMobile
Goran Lowkrantz <address@hidden>
System Architect, isMobile AB
Sandviksgatan 81, PO Box 58, S-971 03 LuleƄ, Sweden
Mobile: +46(0)70-587 87 82
http://www.ismobile.com ...............................................