[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Freeipmi-users] ipmi_open_inband no such device on Ibm e325
From: |
Albert Chu |
Subject: |
Re: [Freeipmi-users] ipmi_open_inband no such device on Ibm e325 |
Date: |
Fri, 24 Mar 2006 11:34:03 -0800 |
Hey Rene,
I remember that thread. The IBM lancfg utility should be fine. What we
found was that there was a bug in the IBM IPMI firmware. So I had to
write a workaround in 'ipmipower' to work around the problem (the
--force-permsg-auth flag) [1]. I don't believe the problem should exist
in the other FreeIPMI over-LAN tools. Please let us know if there are
problems though.
Al
[1] - That does remind me though, I need to re-harass IBM about this bug :-)
--
Albert Chu
address@hidden
925-422-5311
Computer Scientist
High Performance Systems Division
Lawrence Livermore National Laboratory
----- Original Message -----
From: Rene Salmon <address@hidden>
Date: Friday, March 24, 2006 11:16 am
Subject: Re: [Freeipmi-users] ipmi_open_inband no such device on Ibm e325
> Hi,
>
> For the time being I would like to manage the machine with out-band
> IPMI. I just updated the firmware and need I need to set the IP
> and
> password for the BMC. I can use the IBM IPMI config utility
> (lancfg) to
> do this but I found this post that hints to a problem if I use the
> lancfg tool.
>
> http://lists.gnu.org/archive/html/freeipmi-users/2005-11/msg00017.html
>
> Should I just use lancfg to set the ip/passwd or is there a better
> way
> more freeimpi friendly?
>
> Thanks
> Rene
>
>
>
>
> Albert Chu wrote:
> > Hey Rene,
> >
> > Thanks. That verifies atleast why it's failing.
> >
> > /* At this point we only support SYSTEM_IO, i.e. inb/outb style IO.
> > If we cant find the bass address, we better exit. -- Anand
> Babu */
> > if (dev->io.inband.locate_info.addr_space_id !=
> > IPMI_ADDRESS_SPACE_ID_SYSTEM_IO)
> > {
> > errno = ENODEV;
> > return (-1);
> > }
> >
> > The IBM's use memory mapped io. This is the first machine (that
> I've> seen) with memory mapped rather than port based i/o for in-
> band IPMI.
> >
> > A.B., Bala I'll leave this to you to follow up on. Needless to say,
> > this needs to be fixed. I think logically it shouldn't be too
> hard to
> > add? Just need to map some INB/OUTB calls into read/writes? I
> could> give it a shot, but I lack a machine to test on.
> >
> > Al
> >
> > --
> > Albert Chu
> > address@hidden
> > 925-422-5311
> > Computer Scientist
> > High Performance Systems Division
> > Lawrence Livermore National Laboratory
> >
> >
> > ----- Original Message -----
> > From: Rene Salmon <address@hidden>
> > Date: Friday, March 24, 2006 10:18 am
> > Subject: Re: [Freeipmi-users] ipmi_open_inband no such device on
> Ibm e325
> >
> >> Hi,
> >>
> >> Thanks for the help. Here is the output of ipmi-locate.
> >>
> >> Probing KCS device using SMBIOS... done
> >> IPMI Version: 1.5
> >> IPMI locate driver: SMBIOS
> >> IPMI locate driver: 0
> >> IPMI interface: KCS
> >> BMC I2C device: (null)
> >> BMC memory base address: CA2
> >> Register space: 0
> >>
> >> Probing SMIC device using SMBIOS... FAILED
> >>
> >> Probing BT device using SMBIOS... FAILED
> >>
> >> Probing SSIF device using SMBIOS... FAILED
> >>
> >> Probing KCS device using ACPI... FAILED
> >>
> >> Probing SMIC device using ACPI... FAILED
> >>
> >> Probing BT device using ACPI... FAILED
> >>
> >> Probing SSIF device using ACPI... FAILED
> >>
> >> Probing KCS device using PCI... FAILED
> >>
> >> Probing SMIC device using PCI... FAILED
> >>
> >> Probing BT device using PCI... FAILED
> >>
> >> Probing SSIF device using PCI... FAILED
> >>
> >> KCS device default values:
> >> IPMI Version: 1.5
> >> IPMI locate driver: DEFAULT
> >> IPMI locate driver: 0
> >> IPMI interface: KCS
> >> BMC I2C device: (null)
> >> BMC I/O base address: CA2
> >> Register space: 1
> >>
> >> SMIC device default values:
> >> IPMI Version: 1.5
> >> IPMI locate driver: DEFAULT
> >> IPMI locate driver: 0
> >> IPMI interface: SMIC
> >> BMC I2C device: (null)
> >> BMC I/O base address: CA9
> >> Register space: 1
> >>
> >> BT device default values:
> >>
> >> SSIF device default values:
> >> IPMI Version: 1.5
> >> IPMI locate driver: DEFAULT
> >> IPMI locate driver: 0
> >> IPMI interface: SSIF
> >> BMC I2C device: /dev/i2c-0
> >> BMC SMBUS slave address: 20
> >> Register space: 1
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> Albert Chu wrote:
> >>> Hi Rene,
> >>>
> >>> Could you run the ipmi-locate tool so we can see what exactly
> is
> >> on that
> >>> machine?
> >>>
> >>> Al
> >>>
> >>> --
> >>> Albert Chu
> >>> address@hidden
> >>> 925-422-5311
> >>> Computer Scientist
> >>> High Performance Systems Division
> >>> Lawrence Livermore National Laboratory
> >>>
> >>>
> >>> ----- Original Message -----
> >>> From: Rene Salmon <address@hidden>
> >>> Date: Friday, March 24, 2006 9:54 am
> >>> Subject: [Freeipmi-users] ipmi_open_inband no such device on
> Ibm
> >> e325>
> >>>> Hi list,
> >>>>
> >>>> I am very new to IPMI and I am hoping to get some help here.
> >>>> I have an IBM e325 server on which I am trying to run freeimpi
> >> and
> >>>> I am
> >>>> getting the following error when I try to run bmc-info:
> >>>>
> >>>> src/freeipmi# bmc-info
> >>>> ipmi_open_inband(): No such device
> >>>>
> >>>>
> >>>> Here is what i did:
> >>>> downloaded and installed these packages on a SuSe-9.3 e325.
> >>>>
> >>>> freeipmi-0.2.0-1.x86_64.rpm
> >>>> freeipmi-utils-0.2.0-1.x86_64.rpm
> >>>> freeipmi-devel-0.2.0-1.x86_64.rpm
> >>>> freeipmi-fish-0.2.0-1.x86_64.rpm
> >>>>
> >>>> After updating the BMC firmware and the BIOS on the server I
> set
> >> up
> >>>> the
> >>>> following in BIOS settings.
> >>>>
> >>>>
> >>>> * Advanced Setup
> >>>> - Console Redirection
> >>>> - Console Redirection: On-board COM A
> >>>> - Baud Rate: 9600
> >>>> - Console Type: vt100
> >>>> - Flow Control: CTS/RTS
> >>>> - Console connection: Direct
> >>>> - Continue C.R. after POST: On
> >>>> - Baseboard Management Controller
> >>>> - Change COM port Setting: Yes
> >>>> - COM post on BMC: IPMB
> >>>>
> >>>>
> >>>> Any idea as to what might be the problem?
> >>>>
> >>>> Thank you
> >>>>
> >>>> Rene
> >>>>
> >>>>
> >>>> --
> >>>> -
> >>>> --
> >>>> Rene Salmon
> >>>> Tulane University
> >>>> Center for Computational Science
> >>>> Richardson Building 310
> >>>> New Orleans, LA 70118
> >>>> http://www.ccs.tulane.edu
> >>>> Tel 504-862-8393
> >>>> Fax 504-862-8392
> >>>>
> >>>>
> >>>>
> >>>> _______________________________________________
> >>>> Freeipmi-users mailing list
> >>>> address@hidden
> >>>> http://lists.gnu.org/mailman/listinfo/freeipmi-users
> >>>>
> >> --
> >> -
> >> --
> >> Rene Salmon
> >> Tulane University
> >> Center for Computational Science
> >> Richardson Building 310
> >> New Orleans, LA 70118
> >> http://www.ccs.tulane.edu
> >> Tel 504-862-8393
> >> Fax 504-862-8392
> >>
> >>
>
> --
> -
> --
> Rene Salmon
> Tulane University
> Center for Computational Science
> Richardson Building 310
> New Orleans, LA 70118
> http://www.ccs.tulane.edu
> Tel 504-862-8393
> Fax 504-862-8392
>
>