freeipmi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: ipmi-oem Supermicro get-power-supply-status issue


From: Al Chu
Subject: Re: ipmi-oem Supermicro get-power-supply-status issue
Date: Thu, 27 Aug 2020 11:07:01 -0700

On Thu, 2020-08-27 at 14:04 -0400, Andrew Orme wrote:
> Indeed. Seems to run fine on our other systems running the same exact
> hardware. Agreed that it is specific to Supermicro and is perhaps a
> manufacturing issue somewhere.

You may want to double check the firmware version, that's sometimes an
issue.

Al

> On Wed, Aug 26, 2020 at 1:07 PM Al Chu <chu11@llnl.gov> wrote:
> > Hi Andrew,
> > 
> > Thanks for the report.  Since this is a OEM specific command, there
> > is
> > a good chance this just isn't supported on your motherboard.  There
> > is
> > no way to know what Supermicro may have meant with the 0x83 error
> > code.
> > 
> > Al
> > 
> > On Thu, 2020-08-20 at 18:28 -0400, Andrew Orme wrote:
> > > admin@server:~# ipmi-oem --debug Supermicro get-power-supply-
> > status 1
> > > =====================================================
> > > Master Write Read Request
> > > =====================================================
> > > KCS Header:
> > > ------------
> > > [               0h] = lun[ 2b]
> > > [               6h] = net_fn[ 6b]
> > > IPMI Command Data:
> > > ------------------
> > > [              52h] = cmd[ 8b]
> > > [  BYTE ARRAY ... ] = raw_data[ 4B]
> > > [ 07h 70h 01h 0Ch ]
> > > =====================================================
> > > Master Write Read Response
> > > =====================================================
> > > KCS Header:
> > > ------------
> > > [               0h] = lun[ 2b]
> > > [               7h] = net_fn[ 6b]
> > > IPMI Command Data:
> > > ------------------
> > > [              52h] = cmd[ 8b]
> > > [  BYTE ARRAY ... ] = raw_data[ 1B]
> > > [ 83h ]
> > > Supermicro:get-power-supply-status failed: No error message found
> > for
> > > command 52h, network function 06h, and completion code 83h. 
> > Please
> > > report to <freeipmi-devel@gnu.org>
> > > 
> > > admin@server:~# dmidecode -t 39 | grep 'Name'
> > > Name: To Be Filled By O.E.M.
> > > Name: To Be Filled By O.E.M.
> > > 
> > > admin@server:~# dmidecode -t 39
> > > # dmidecode 2.12
> > > SMBIOS 2.8 present.
> > > 
> > > Handle 0x0018, DMI type 39, 22 bytes
> > > System Power Supply
> > > Power Unit Group: 1
> > > Location: PSU1
> > > Name: To Be Filled By O.E.M.
> > > Manufacturer: To Be Filled By O.E.M.
> > > Serial Number: To Be Filled By O.E.M.
> > > Asset Tag: To Be Filled By O.E.M.
> > > Model Part Number: To Be Filled By O.E.M.
> > > Revision: To Be Filled By O.E.M.
> > > Max Power Capacity: Unknown
> > > Status: Not Present
> > > Type: Switching
> > > Input Voltage Range Switching: Auto-switch
> > > Plugged: Yes
> > > Hot Replaceable: No
> > > 
> > > Handle 0x0019, DMI type 39, 22 bytes
> > > System Power Supply
> > > Power Unit Group: 2
> > > Location: PSU2
> > > Name: To Be Filled By O.E.M.
> > > Manufacturer: To Be Filled By O.E.M.
> > > Serial Number: To Be Filled By O.E.M.
> > > Asset Tag: To Be Filled By O.E.M.
> > > Model Part Number: To Be Filled By O.E.M.
> > > Revision: To Be Filled By O.E.M.
> > > Max Power Capacity: Unknown
> > > Status: Not Present
> > > Type: Switching
> > > Input Voltage Range Switching: Auto-switch
> > > Plugged: Yes
> > > Hot Replaceable: No
> > 




reply via email to

[Prev in Thread] Current Thread [Next in Thread]