[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [fluid-dev] About linked sample in the SoundFont2.04 specs

From: Ox Zaief
Subject: Re: [fluid-dev] About linked sample in the SoundFont2.04 specs
Date: Wed, 27 Mar 2019 17:41:39 +0900

Hi jjc,

I think each zone can contain only one sample, whether the samples are only a 
half of one voice.
The specs say "Left-right pairs should always be found within the same 
This implicitly means that the two samples have to be chosen by two sampleIDs,  
but each zone can contain only one sampleID generator.


> On 2019/03/27, at 7:47, Ceresa Jean-Jacques <address@hidden> wrote:
> >“ What happens if there is an instrument with two zone, one zone containing 
> >a left sample and pitch generators, the other zone containing right sample? 
> >Do they ignore the pitch generators?
> Each Instrument Zones are instancied by independent "voices" in the 
> synthesizer. In your example at noteon 2 voices wil be started (one voice per 
> instrument zone). Each voice have (modulators, a sample wave table , lfos, 
> adsrs, filter....).
> What the spec say is related to one zone (i.e one voice) at a time. For one 
> voice making use of linked sample spec section 7.10 is relevant (i.e 2 
> samples are played simultaneously, but both should be controlled only by one 
> pitch generator (i.e the right one).
> >What about pitch modulators?
> This is independent to previous question. Pitch modulator(s) should modulate 
> pitch generator (regardless this generator controls one or two sample).
> jjc.
> _______________________________________________
> fluid-dev mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/fluid-dev

reply via email to

[Prev in Thread] Current Thread [Next in Thread]