fluid-dev
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [fluid-dev] Getting severe clicking/static with FluidSynth (on Andro


From: Ien Cheng
Subject: Re: [fluid-dev] Getting severe clicking/static with FluidSynth (on Android)
Date: Mon, 30 Jan 2017 19:15:04 -0500

Thanks Ceresa, I will try that. Any reason why a high gain would be fine for the first 15 seconds and then start to deteriorate? (Asking to help myself understand how it all works...) --Ien

On Mon, Jan 30, 2017 at 7:12 PM, Ceresa Jean-Jacques <address@hidden> wrote:

Hi, Ien

 

After a quick glance on the recording please try with a lower gain value.

You can set the gain value using the command "gain".

Example:

> gain 0.5

or

> gain 0.2

 

regards.

 

jjc

 

> Message du 30/01/17 16:03
> De : "Ien Cheng" <address@hidden>
> A : "FluidSynth mailing list" <address@hidden>
> Copie à :
> Objet : [fluid-dev] Getting severe clicking/static with FluidSynth (on Android)

>
>
Hi all,

>
I'm using the synth to play a piece of music with a series of note on/off commands, using a harp soundfont. This is on an Android phone using this Android wrapper for FluidSynth.

>
It starts off great, with clean sound, but after around 15, there starts to be clipping/clicking/static sounds which quickly worsen to the point of being unusable. Here is a recording

>
I'm hoping this is a common problem due to some kind of mistake with the settings. Any hints or help on how to solve this would be much appreciated!

>
--Ien



_______________________________________________
fluid-dev mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/fluid-dev


_______________________________________________
fluid-dev mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/fluid-dev



reply via email to

[Prev in Thread] Current Thread [Next in Thread]