[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Flexisip-developers] registers with itself until 483 Too Many Hops

From: Brian J. Murrell
Subject: Re: [Flexisip-developers] registers with itself until 483 Too Many Hops
Date: Tue, 23 Jul 2019 11:27:45 -0400
User-agent: Evolution 3.32.3 (3.32.3-1.fc30)

On Tue, 2019-07-23 at 16:33 +0200, Nicolas Michon wrote:
> The module of interest here is "Forward".

As I had figured.

> Try to define the [module::Forward] route=sip:<Asterisk IP/FQDN>:5060

And that is also the option I guessed would be relevant.  When I had
configured this as you describe previously registration was simply

But it seems to be working now.  Must have been one of the number of
updates I've seen to flexisip since I tried last.

Now when I try to complete a call, I get:

2019-07-23 11:04:44:487 flexisip-warning-Error sending 172 bytes 
(localport=2650 dest=2001:123:ab:123:d97d:aa51:fb71:d67:7078) : Address family 
not supported by protocol

There could very well be some additional flexisip<->asterisk
configuration tidbits that need doing but before I go any further, the
above seems rather alarming.

Surely it's not telling me that flexisip doesn't support IPv6, is it?

I can provide a flexisip log if the above warning message doesn't have
enough context within itself.


Attachment: signature.asc
Description: This is a digitally signed message part

reply via email to

[Prev in Thread] Current Thread [Next in Thread]