[Emacs-diffs] Changes to emacs/man/info.texi

[Luc Teirlinck]

Index: emacs/man/info.texi
diff -c emacs/man/info.texi:1.29 emacs/man/info.texi:1.30
*** emacs/man/info.texi:1.29    Fri Jul  4 17:07:23 2003
--- emacs/man/info.texi Mon Jul  7 21:21:43 2003
***************
*** 6,12 ****
  @syncodeindex vr cp
  @syncodeindex ky cp
  @comment %**end of header
! @comment $Id: info.texi,v 1.29 2003/07/04 21:07:23 teirllm Exp $
  
  @copying
  This file describes how to use Info, the on-line, menu-driven GNU
--- 6,12 ----
  @syncodeindex vr cp
  @syncodeindex ky cp
  @comment %**end of header
! @comment $Id: info.texi,v 1.30 2003/07/08 01:21:43 teirllm Exp $
  
  @copying
  This file describes how to use Info, the on-line, menu-driven GNU
***************
*** 417,423 ****
     to visit the next node.
  @end format
  
! @node Help-Inv, Help-M, Help-^L, Getting Started 
  @comment  node-name,  next,  previous,  up
  @section Invisible text in Emacs Info
  
--- 417,423 ----
     to visit the next node.
  @end format
  
! @node Help-Inv, Help-M, Help-^L, Getting Started
  @comment  node-name,  next,  previous,  up
  @section Invisible text in Emacs Info
  
***************
*** 433,452 ****
  output, it gets saved to file just like any other text, and so on.
  Thus it is useful to know it is there.
  
! @findex vis-mode
  You can make invisible text visible by using the command @kbd{M-x
! vis-mode}.  @code{vis-mode} is a minor mode, so using it a second time
! will make the text invisible again.  Use this command and watch its
! effect on the ``menu'' below and the top line of this node.
  
  If you prefer to @emph{always} see the invisible text, you can set
  @code{Info-hide-note-references} to @code{nil}.  Enabling
! @code{vis-mode} permanently is not a real alternative, because Emacs
! Info also uses (although less extensively) another text property that
! can change the text being displayed, the @samp{display} property.
! Only the invisibility property is affected by @code{vis-mode}.  When,
! in this tutorial, we refer to the @samp{Emacs} behavior, we mean the
! @emph{default} Emacs behavior.
  
  Now type @kbd{]}, to learn about the @kbd{]} and @kbd{[} commands.
  
--- 433,452 ----
  output, it gets saved to file just like any other text, and so on.
  Thus it is useful to know it is there.
  
! @findex visible-mode
  You can make invisible text visible by using the command @kbd{M-x
! visible-mode}.  @code{visible-mode} is a minor mode, so using it a
! second time will make the text invisible again.  Use this command and
! watch its effect on the ``menu'' below and the top line of this node.
  
  If you prefer to @emph{always} see the invisible text, you can set
  @code{Info-hide-note-references} to @code{nil}.  Enabling
! @code{visible-mode} permanently is not a real alternative, because
! Emacs Info also uses (although less extensively) another text property
! that can change the text being displayed, the @samp{display} property.
! Only the invisibility property is affected by @code{visible-mode}.
! When, in this tutorial, we refer to the @samp{Emacs} behavior, we mean
! the @emph{default} Emacs behavior.
  
  Now type @kbd{]}, to learn about the @kbd{]} and @kbd{[} commands.
  
***************
*** 526,532 ****
  in a real menu item, the @samp{*} would appear at the very start of
  the line.  This is why the ``normally hidden'' text in Emacs, namely
  @samp{: Node about FOO.}, is actually visible in this example, even
! when @code{vis-mode} is off.]]
  
    When you use a menu to go to another node (in a way that will be
  described soon), what you specify is the subtopic name, the first
--- 526,532 ----
  in a real menu item, the @samp{*} would appear at the very start of
  the line.  This is why the ``normally hidden'' text in Emacs, namely
  @samp{: Node about FOO.}, is actually visible in this example, even
! when @code{visible-mode} is off.]]
  
    When you use a menu to go to another node (in a way that will be
  described soon), what you specify is the subtopic name, the first
***************
*** 619,625 ****
  * Help-FOO::            And yet another!
  @end menu
  
! (Turn @code{vis-mode} on if you are using Emacs.)
  
  @format
  >>  Now type just an @kbd{m} and see what happens:
--- 619,625 ----
  * Help-FOO::            And yet another!
  @end menu
  
! (Turn @code{visible-mode} on if you are using Emacs.)
  
  @format
  >>  Now type just an @kbd{m} and see what happens:
***************
*** 735,741 ****
  Cross references look like this: @xref{Help-Cross, Cross}.  That text
  is a real, live cross reference, whose name is @samp{Cross} and which
  points to the node named @samp{Help-Cross}.  (The node name is hidden
! in Emacs.  Do @kbd{M-x vis-mode} to show or hide it.)
  
  @kindex f @r{(Info mode)}
  @findex Info-follow-reference
--- 735,741 ----
  Cross references look like this: @xref{Help-Cross, Cross}.  That text
  is a real, live cross reference, whose name is @samp{Cross} and which
  points to the node named @samp{Help-Cross}.  (The node name is hidden
! in Emacs.  Do @kbd{M-x visible-mode} to show or hide it.)
  
  @kindex f @r{(Info mode)}
  @findex Info-follow-reference
***************
*** 787,797 ****
  @samp{texinfo} between parentheses (shown in the stand-alone version)
  refers to the file name.  This file name appears in cross references
  and node names if it differs from the current file.  In Emacs, the
! file name is hidden (along with other text).  (Use @kbd{M-x vis-mode}
! to show or hide it.)
  
    The remainder of this node applies only to the Emacs version.  If
! you use the stand-alone version, you can type @kbd{n} immediately.   
  
    To some users, switching manuals is a much bigger switch than
  switching sections.  These users like to know that they are going to
--- 787,797 ----
  @samp{texinfo} between parentheses (shown in the stand-alone version)
  refers to the file name.  This file name appears in cross references
  and node names if it differs from the current file.  In Emacs, the
! file name is hidden (along with other text).  (Use @kbd{M-x
! visible-mode} to show or hide it.)
  
    The remainder of this node applies only to the Emacs version.  If
! you use the stand-alone version, you can type @kbd{n} immediately.
  
    To some users, switching manuals is a much bigger switch than
  switching sections.  These users like to know that they are going to