[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Emacs-diffs] Changes to emacs/lisp/international/utf-8.el
From: |
Dave Love |
Subject: |
[Emacs-diffs] Changes to emacs/lisp/international/utf-8.el |
Date: |
Wed, 17 Jul 2002 11:04:26 -0400 |
Index: emacs/lisp/international/utf-8.el
diff -c emacs/lisp/international/utf-8.el:1.13
emacs/lisp/international/utf-8.el:1.14
*** emacs/lisp/international/utf-8.el:1.13 Sat Apr 6 05:44:36 2002
--- emacs/lisp/international/utf-8.el Wed Jul 17 11:04:25 2002
***************
*** 1,10 ****
! ;;; utf-8.el --- limited UTF-8 decoding/encoding support -*- coding:
iso-2022-7bit -*-
;; Copyright (C) 2001 Electrotechnical Laboratory, JAPAN.
;; Licensed to the Free Software Foundation.
! ;; Copyright (C) 2001 Free Software Foundation, Inc.
;; Author: TAKAHASHI Naoto <address@hidden>
;; Keywords: multilingual, Unicode, UTF-8, i18n
;; This file is part of GNU Emacs.
--- 1,11 ----
! ;;; utf-8.el --- UTF-8 decoding/encoding support -*- coding: iso-2022-7bit -*-
;; Copyright (C) 2001 Electrotechnical Laboratory, JAPAN.
;; Licensed to the Free Software Foundation.
! ;; Copyright (C) 2001, 2002 Free Software Foundation, Inc.
;; Author: TAKAHASHI Naoto <address@hidden>
+ ;; Maintainer: FSF
;; Keywords: multilingual, Unicode, UTF-8, i18n
;; This file is part of GNU Emacs.
***************
*** 39,49 ****
;; On decoding, Unicode characters that do not fit into the above
;; character sets are handled as `eight-bit-control' or
;; `eight-bit-graphic' characters to retain the information about the
! ;; original byte sequence.
;;
;; Characters from other character sets can be encoded with
;; mule-utf-8 by populating the table `ucs-mule-to-mule-unicode' and
! ;; registering the translation with `register-char-codings'.
;; UTF-8 is defined in RFC 2279. A sketch of the encoding is:
--- 40,57 ----
;; On decoding, Unicode characters that do not fit into the above
;; character sets are handled as `eight-bit-control' or
;; `eight-bit-graphic' characters to retain the information about the
! ;; original byte sequence and text properties record the corresponding
! ;; unicode.
! ;;
! ;; Fixme: note that reading and writing invalid utf-8 may not be
! ;; idempotent -- to represent the bytes to fix that needs a new charset.
;;
;; Characters from other character sets can be encoded with
;; mule-utf-8 by populating the table `ucs-mule-to-mule-unicode' and
! ;; registering the translation with `register-char-codings'. Hash
! ;; tables `utf-8-subst-table' and `utf-8-subst-rev-table' are used to
! ;; support encoding and decoding of about a quarter of the CJK space
! ;; between U+3400 and U+DFFF.
;; UTF-8 is defined in RFC 2279. A sketch of the encoding is:
***************
*** 60,66 ****
"Translation table for encoding to `mule-utf-8'.")
;; Could have been done by ucs-tables loaded before.
(unless (get 'ucs-mule-to-mule-unicode 'translation-table)
! (define-translation-table 'ucs-mule-to-mule-unicode
ucs-mule-to-mule-unicode))
(define-ccl-program ccl-decode-mule-utf-8
;;
;; charset | bytes in utf-8 | bytes in emacs
--- 68,178 ----
"Translation table for encoding to `mule-utf-8'.")
;; Could have been done by ucs-tables loaded before.
(unless (get 'ucs-mule-to-mule-unicode 'translation-table)
! (define-translation-table 'ucs-mule-to-mule-unicode
! ucs-mule-to-mule-unicode))
!
! (defvar utf-8-subst-table (make-hash-table :test 'eq))
! (defvar utf-8-subst-rev-table (make-hash-table :test 'eq))
! (define-translation-hash-table 'utf-8-subst-table utf-8-subst-table)
! (define-translation-hash-table 'utf-8-subst-rev-table utf-8-subst-rev-table)
!
! (defvar utf-8-translation-table-for-decode (make-translation-table)
! "Translation table applied after decoding utf-8 to mule-unicode.
! This is only actually applied to characters which would normally be
! decoded into mule-unicode-0100-24ff.")
! (define-translation-table 'utf-8-translation-table-for-decode
! utf-8-translation-table-for-decode)
!
! ;; Map Cyrillic and Greek to iso-8859 charsets, which take half the
! ;; space of mule-unicode. For Latin scripts this isn't very
! ;; important. Hebrew and Arabic might go here too when there's proper
! ;; support for them.
! (mapc
! (lambda (pair)
! (aset utf-8-translation-table-for-decode (car pair) (cdr pair)))
! '((?$,1&d(B . ?,F4(B) (?$,1&e(B . ?,F5(B) (?$,1&f(B . ?,F6(B)
(?$,1&h(B . ?,F8(B) (?$,1&i(B . ?,F9(B)
! (?$,1&j(B . ?,F:(B) (?$,1&l(B . ?,F<(B) (?$,1&n(B . ?,F>(B)
(?$,1&o(B . ?,F?(B) (?$,1&p(B . ?,address@hidden(B)
! (?$,1&q(B . ?,FA(B) (?$,1&r(B . ?,FB(B) (?$,1&s(B . ?,FC(B)
(?$,1&t(B . ?,FD(B) (?$,1&u(B . ?,FE(B)
! (?$,1&v(B . ?,FF(B) (?$,1&w(B . ?,FG(B) (?$,1&x(B . ?,FH(B)
(?$,1&y(B . ?,FI(B) (?$,1&z(B . ?,FJ(B)
! (?$,1&{(B . ?,FK(B) (?$,1&|(B . ?,FL(B) (?$,1&}(B . ?,FM(B)
(?$,1&~(B . ?,FN(B) (?$,1&(B . ?,FO(B)
! (?$,1' (B . ?,FP(B) (?$,1'!(B . ?,FQ(B) (?$,1'#(B . ?,FS(B)
(?$,1'$(B . ?,FT(B) (?$,1'%(B . ?,FU(B)
! (?$,1'&(B . ?,FV(B) (?$,1''(B . ?,FW(B) (?$,1'((B . ?,FX(B)
(?$,1')(B . ?,FY(B) (?$,1'*(B . ?,FZ(B)
! (?$,1'+(B . ?,F[(B) (?$,1',(B . ?,F\(B) (?$,1'-(B . ?,F](B)
(?$,1'.(B . ?,F^(B) (?$,1'/(B . ?,F_(B)
! (?$,1'0(B . ?,F`(B) (?$,1'1(B . ?,Fa(B) (?$,1'2(B . ?,Fb(B)
(?$,1'3(B . ?,Fc(B) (?$,1'4(B . ?,Fd(B)
! (?$,1'5(B . ?,Fe(B) (?$,1'6(B . ?,Ff(B) (?$,1'7(B . ?,Fg(B)
(?$,1'8(B . ?,Fh(B) (?$,1'9(B . ?,Fi(B)
! (?$,1':(B . ?,Fj(B) (?$,1';(B . ?,Fk(B) (?$,1'<(B . ?,Fl(B)
(?$,1'=(B . ?,Fm(B) (?$,1'>(B . ?,Fn(B)
! (?$,1'?(B . ?,Fo(B) (?$,1'@(B . ?,Fp(B) (?$,1'A(B . ?,Fq(B)
(?$,1'B(B . ?,Fr(B) (?$,1'C(B . ?,Fs(B)
! (?$,1'D(B . ?,Ft(B) (?$,1'E(B . ?,Fu(B) (?$,1'F(B . ?,Fv(B)
(?$,1'G(B . ?,Fw(B) (?$,1'H(B . ?,Fx(B)
! (?$,1'I(B . ?,Fy(B) (?$,1'J(B . ?,Fz(B) (?$,1'K(B . ?,F{(B)
(?$,1'L(B . ?,F|(B) (?$,1'M(B . ?,F}(B)
! (?$,1'N(B . ?,F~(B)
!
! (?$,1(!(B . ?,L!(B) (?$,1("(B . ?,L"(B) (?$,1(#(B . ?,L#(B)
(?$,1($(B . ?,L$(B)
! (?$,1(%(B . ?,L%(B) (?$,1(&(B . ?,L&(B) (?$,1('(B . ?,L'(B)
(?$,1(((B . ?,L((B) (?$,1()(B . ?,L)(B)
! (?$,1(*(B . ?,L*(B) (?$,1(+(B . ?,L+(B) (?$,1(,(B . ?,L,(B)
(?$,1(.(B . ?,L.(B) (?$,1(/(B . ?,L/(B)
! (?$,1(0(B . ?,L0(B) (?$,1(1(B . ?,L1(B) (?$,1(2(B . ?,L2(B)
(?$,1(3(B . ?,L3(B) (?$,1(4(B . ?,L4(B)
! (?$,1(5(B . ?,L5(B) (?$,1(6(B . ?,L6(B) (?$,1(7(B . ?,L7(B)
(?$,1(8(B . ?,L8(B) (?$,1(9(B . ?,L9(B)
! (?$,1(:(B . ?,L:(B) (?$,1(;(B . ?,L;(B) (?$,1(<(B . ?,L<(B)
(?$,1(=(B . ?,L=(B) (?$,1(>(B . ?,L>(B)
! (?$,1(?(B . ?,L?(B) (?$,1(@(B . ?,address@hidden(B) (?$,1(A(B .
?,LA(B) (?$,1(B(B . ?,LB(B) (?$,1(C(B . ?,LC(B)
! (?$,1(D(B . ?,LD(B) (?$,1(E(B . ?,LE(B) (?$,1(F(B . ?,LF(B)
(?$,1(G(B . ?,LG(B) (?$,1(H(B . ?,LH(B)
! (?$,1(I(B . ?,LI(B) (?$,1(J(B . ?,LJ(B) (?$,1(K(B . ?,LK(B)
(?$,1(L(B . ?,LL(B) (?$,1(M(B . ?,LM(B)
! (?$,1(N(B . ?,LN(B) (?$,1(O(B . ?,LO(B) (?$,1(P(B . ?,LP(B)
(?$,1(Q(B . ?,LQ(B) (?$,1(R(B . ?,LR(B)
! (?$,1(S(B . ?,LS(B) (?$,1(T(B . ?,LT(B) (?$,1(U(B . ?,LU(B)
(?$,1(V(B . ?,LV(B) (?$,1(W(B . ?,LW(B)
! (?$,1(X(B . ?,LX(B) (?$,1(Y(B . ?,LY(B) (?$,1(Z(B . ?,LZ(B)
(?$,1([(B . ?,L[(B) (?$,1(\(B . ?,L\(B)
! (?$,1(](B . ?,L](B) (?$,1(^(B . ?,L^(B) (?$,1(_(B . ?,L_(B)
(?$,1(`(B . ?,L`(B) (?$,1(a(B . ?,La(B)
! (?$,1(b(B . ?,Lb(B) (?$,1(c(B . ?,Lc(B) (?$,1(d(B . ?,Ld(B)
(?$,1(e(B . ?,Le(B) (?$,1(f(B . ?,Lf(B)
! (?$,1(g(B . ?,Lg(B) (?$,1(h(B . ?,Lh(B) (?$,1(i(B . ?,Li(B)
(?$,1(j(B . ?,Lj(B) (?$,1(k(B . ?,Lk(B)
! (?$,1(l(B . ?,Ll(B) (?$,1(m(B . ?,Lm(B) (?$,1(n(B . ?,Ln(B)
(?$,1(o(B . ?,Lo(B) (?$,1(q(B . ?,Lq(B)
! (?$,1(r(B . ?,Lr(B) (?$,1(s(B . ?,Ls(B) (?$,1(t(B . ?,Lt(B)
(?$,1(u(B . ?,Lu(B) (?$,1(v(B . ?,Lv(B)
! (?$,1(w(B . ?,Lw(B) (?$,1(x(B . ?,Lx(B) (?$,1(y(B . ?,Ly(B)
(?$,1(z(B . ?,Lz(B) (?$,1({(B . ?,L{(B)
! (?$,1(|(B . ?,L|(B) (?$,1(~(B . ?,L~(B) (?$,1((B . ?,L(B)))
!
! (defcustom utf-8-fragment-on-decoding nil
! "Whether or not to decode some scripts in UTF-8 text into 8-bit characters.
! Setting this means that the relevant Cyrillic and Greek characters are
! decoded into the iso8859 charsets rather than into
! mule-unicode-0100-24ff. The 8-bit characters take half as much space
! in the buffer, but using them may affect how the buffer can be re-encoded
! and may require a different input method to search for them, for instance.
! See `unify-8859-on-decoding-mode' and `unify-8859-on-encoding-mode'
! for mechanisms to make this largely transparent."
! :set (lambda (s v)
! (if v
! (define-translation-table 'utf-8-translation-table-for-decode
! utf-8-translation-table-for-decode)
! (define-translation-table 'utf-8-translation-table-for-decode))
! (set-default s v))
! :version "21.4"
! :type 'boolean
! :group 'mule)
!
! (defcustom utf-8-translate-cjk nil
! "Whether the `mule-utf-8' coding system should encode many CJK characters.
!
! Enabling this loads tables which enable the coding system to encode
! characters in the charsets `korean-ksc5601', `chinese-gb2312' and
! `japanese-jisx0208', and to decode the corresponding unicodes into
! such characters. This works by loading the library `utf-8-subst'; see
! its commentary. The tables are fairly large (about 33000 entries), so this
! option is not the default."
! :link '(emacs-commentary-link "utf-8-subst")
! :set (lambda (s v)
! (when v
! (require 'utf-8-subst)
! (let ((table (make-char-table 'translation-table)))
! (coding-system-put 'mule-utf-8 'safe-charsets
! (append (coding-system-get 'mule-utf-8
! 'safe-charsets)
! '(korean-ksc5601 chinese-gb2312
! japanese-jisx0208)))
! (maphash (lambda (k v)
! (aset table k v))
! utf-8-subst-rev-table)
! (register-char-codings 'mule-utf-8 table)))
! (set-default s v))
! :version "21.4"
! :type 'boolean
! :group 'mule)
!
(define-ccl-program ccl-decode-mule-utf-8
;;
;; charset | bytes in utf-8 | bytes in emacs
***************
*** 90,155 ****
;; 1byte encoding, i.e., ascii
(if (r0 < #x80)
(write r0)
! ;; 2 byte encoding 00000yyyyyxxxxxx = 110yyyyy 10xxxxxx
! (if (r0 < #xe0)
! ((read r1)
!
! (if ((r1 & #b11000000) != #b10000000)
! ;; Invalid 2-byte sequence
! ((if (r0 < #xa0)
! (write-multibyte-character r5 r0)
! (write-multibyte-character r6 r0))
! (if (r1 < #x80)
! (write r1)
! (if (r1 < #xa0)
! (write-multibyte-character r5 r1)
! (write-multibyte-character r6 r1))))
!
! ((r0 &= #x1f)
! (r0 <<= 6)
! (r1 &= #x3f)
! (r1 += r0)
! ;; Now r1 holds scalar value
!
! ;; eight-bit-control
! (if (r1 < 160)
! ((write-multibyte-character r5 r1))
!
! ;; latin-iso8859-1
! (if (r1 < 256)
! ((r0 = ,(charset-id 'latin-iso8859-1))
! (r1 -= 128)
! (write-multibyte-character r0 r1))
!
! ;; mule-unicode-0100-24ff (< 0800)
! ((r0 = ,(charset-id 'mule-unicode-0100-24ff))
! (r1 -= #x0100)
! (r2 = (((r1 / 96) + 32) << 7))
! (r1 %= 96)
! (r1 += (r2 + 32))
! (write-multibyte-character r0 r1)))))))
!
! ;; 3byte encoding
! ;; zzzzyyyyyyxxxxxx = 1110zzzz 10yyyyyy 10xxxxxx
! (if (r0 < #xf0)
! ((read r1 r2)
!
! ;; This is set to 1 if the encoding is invalid.
! (r4 = 0)
!
! (r3 = (r1 & #b11000000))
! (r3 |= ((r2 >> 2) & #b00110000))
! (if (r3 != #b10100000)
! (r4 = 1)
! ((r3 = ((r0 & #x0f) << 12))
! (r3 += ((r1 & #x3f) << 6))
! (r3 += (r2 & #x3f))
! (if (r3 < #x0800)
! (r4 = 1))))
!
! (if (r4 != 0)
! ;; Invalid 3-byte sequence
((if (r0 < #xa0)
(write-multibyte-character r5 r0)
(write-multibyte-character r6 r0))
--- 202,217 ----
;; 1byte encoding, i.e., ascii
(if (r0 < #x80)
(write r0)
+ (if (r0 < #xc0) ; continuation byte (invalid here)
+ (if (r0 < #xa0)
+ (write-multibyte-character r5 r0)
+ (write-multibyte-character r6 r0))
+ ;; 2 byte encoding 00000yyyyyxxxxxx = 110yyyyy 10xxxxxx
+ (if (r0 < #xe0)
+ ((read r1)
! (if ((r1 & #b11000000) != #b10000000)
! ;; Invalid 2-byte sequence
((if (r0 < #xa0)
(write-multibyte-character r5 r0)
(write-multibyte-character r6 r0))
***************
*** 157,231 ****
(write r1)
(if (r1 < #xa0)
(write-multibyte-character r5 r1)
! (write-multibyte-character r6 r1)))
! (if (r2 < #x80)
! (write r2)
! (if (r2 < #xa0)
! (write-multibyte-character r5 r2)
! (write-multibyte-character r6 r2))))
! ;; mule-unicode-0100-24ff (>= 0800)
! ((if (r3 < #x2500)
! ((r0 = ,(charset-id 'mule-unicode-0100-24ff))
! (r3 -= #x0100)
! (r3 //= 96)
! (r1 = (r7 + 32))
! (r1 += ((r3 + 32) << 7))
! (write-multibyte-character r0 r1))
!
! ;; mule-unicode-2500-33ff
! (if (r3 < #x3400)
! ((r0 = ,(charset-id 'mule-unicode-2500-33ff))
! (r3 -= #x2500)
(r3 //= 96)
(r1 = (r7 + 32))
(r1 += ((r3 + 32) << 7))
(write-multibyte-character r0 r1))
!
! ;; U+3400 .. U+DFFF
! ;; keep those bytes as eight-bit-{control|graphic}
! (if (r3 < #xe000)
! ( ;; #xe0 <= r0 < #xf0, so r0 is eight-bit-graphic
! (r3 = r6)
! (write-multibyte-character r3 r0)
! (if (r1 < #xa0)
! (r3 = r5))
! (write-multibyte-character r3 r1)
! (if (r2 < #xa0)
! (r3 = r5)
! (r3 = r6))
! (write-multibyte-character r3 r2))
! ;; mule-unicode-e000-ffff
! ((r0 = ,(charset-id 'mule-unicode-e000-ffff))
! (r3 -= #xe000)
! (r3 //= 96)
! (r1 = (r7 + 32))
! (r1 += ((r3 + 32) << 7))
! (write-multibyte-character r0 r1))))))))
!
! ;; 4byte encoding
! ;; keep those bytes as eight-bit-{control|graphic}
! ((read r1 r2 r3)
! ;; r0 > #xf0, thus eight-bit-graphic
! (write-multibyte-character r6 r0)
! (if (r1 < #xa0)
! (write-multibyte-character r5 r1)
! (write-multibyte-character r6 r1))
! (if (r2 < #xa0)
! (write-multibyte-character r5 r2)
! (write-multibyte-character r6 r2))
! (if (r3 < #xa0)
! (write-multibyte-character r5 r3)
! (write-multibyte-character r6 r3))))))
!
(repeat))))
"CCL program to decode UTF-8.
Basic decoding is done into the charsets ascii, latin-iso8859-1 and
! mule-unicode-*. Encodings of un-representable Unicode characters are
! decoded asis into eight-bit-control and eight-bit-graphic
! characters.")
(define-ccl-program ccl-encode-mule-utf-8
`(1
--- 219,413 ----
(write r1)
(if (r1 < #xa0)
(write-multibyte-character r5 r1)
! (write-multibyte-character r6 r1))))
!
! ((r3 = r0) ; save in case of overlong sequence
! (r2 = r1)
! (r0 &= #x1f)
! (r0 <<= 6)
! (r2 = r1) ; save in case of overlong sequence
! (r1 &= #x3f)
! (r1 += r0)
! ;; Now r1 holds scalar value
!
! (if (r1 < 128) ; `overlong sequence'
! ((if (r3 < #xa0)
! (write-multibyte-character r5 r3)
! (write-multibyte-character r6 r3))
! (if (r2 < #x80)
! (write r2)
! (if (r2 < #xa0)
! (write-multibyte-character r5 r2)
! (write-multibyte-character r6 r2))))
!
! ;; eight-bit-control
! (if (r1 < 160)
! ((write-multibyte-character r5 r1))
!
! ;; latin-iso8859-1
! (if (r1 < 256)
! ((r0 = ,(charset-id 'latin-iso8859-1))
! (r1 -= 128)
! (write-multibyte-character r0 r1))
!
! ;; mule-unicode-0100-24ff (< 0800)
! ((r0 = ,(charset-id 'mule-unicode-0100-24ff))
! (r1 -= #x0100)
! (r2 = (((r1 / 96) + 32) << 7))
! (r1 %= 96)
! (r1 += (r2 + 32))
! (translate-character
! utf-8-translation-table-for-decode r0 r1)
! (write-multibyte-character r0 r1))))))))
!
! ;; 3byte encoding
! ;; zzzzyyyyyyxxxxxx = 1110zzzz 10yyyyyy 10xxxxxx
! (if (r0 < #xf0)
! ((read r1 r2)
!
! ;; This is set to 1 if the encoding is invalid.
! (r4 = 0)
!
! (r3 = (r1 & #b11000000))
! (r3 |= ((r2 >> 2) & #b00110000))
! (if (r3 != #b10100000)
! (r4 = 1)
! ((r3 = ((r0 & #x0f) << 12))
! (r3 += ((r1 & #x3f) << 6))
! (r3 += (r2 & #x3f))
! (if (r3 < #x0800)
! (r4 = 1))))
!
! (if (r4 != 0)
! ;; Invalid 3-byte sequence
! ((if (r0 < #xa0)
! (write-multibyte-character r5 r0)
! (write-multibyte-character r6 r0))
! (if (r1 < #x80)
! (write r1)
! (if (r1 < #xa0)
! (write-multibyte-character r5 r1)
! (write-multibyte-character r6 r1)))
! (if (r2 < #x80)
! (write r2)
! (if (r2 < #xa0)
! (write-multibyte-character r5 r2)
! (write-multibyte-character r6 r2))))
! ;; mule-unicode-0100-24ff (>= 0800)
! ((if (r3 < #x2500)
! ((r0 = ,(charset-id 'mule-unicode-0100-24ff))
! (r3 -= #x0100)
(r3 //= 96)
(r1 = (r7 + 32))
(r1 += ((r3 + 32) << 7))
+ (translate-character
+ utf-8-translation-table-for-decode r0 r1)
(write-multibyte-character r0 r1))
!
! ;; mule-unicode-2500-33ff
! ;; Fixme: Perhaps allow translation via
! ;; utf-8-subst-table for #x2e80 up, so that we use
! ;; consistent charsets for all of CJK. Would need
! ;; corresponding change to encoding tables.
! (if (r3 < #x3400)
! ((r0 = ,(charset-id 'mule-unicode-2500-33ff))
! (r3 -= #x2500)
! (r3 //= 96)
! (r1 = (r7 + 32))
! (r1 += ((r3 + 32) << 7))
! (write-multibyte-character r0 r1))
!
! ;; U+3400 .. U+D7FF
! ;; Try to convert to CJK chars, else keep
! ;; them as eight-bit-{control|graphic}.
! (if (r3 < #xd800)
! ((r4 = r3) ; don't zap r3
! (lookup-integer utf-8-subst-table r4 r5)
! (if r7
! ;; got a translation
! ((write-multibyte-character r4 r5)
! ;; Zapped through register starvation.
! (r5 = ,(charset-id 'eight-bit-control)))
! ;; #xe0 <= r0 < #xf0, so r0 is eight-bit-graphic
! ((r3 = r6)
! (write-multibyte-character r3 r0)
! (if (r1 < #xa0)
! (r3 = r5))
! (write-multibyte-character r3 r1)
! (if (r2 < #xa0)
! (r3 = r5)
! (r3 = r6))
! (write-multibyte-character r3 r2))))
!
! ;; Surrogates, U+D800 .. U+DFFF
! ;; Fixme: process them properly.
! (if (r3 < #xe000)
! ((r3 = r6)
! (write-multibyte-character r3 r0) ;
eight-bit-graphic
! (if (r1 < #xa0)
! (r3 = r5))
! (write-multibyte-character r3 r1)
! (if (r2 < #xa0)
! (r3 = r5)
! (r3 = r6))
! (write-multibyte-character r3 r2))
! ;; mule-unicode-e000-ffff
! ;; Fixme: fffe and ffff are invalid.
! ((r0 = ,(charset-id 'mule-unicode-e000-ffff))
! (r3 -= #xe000)
! (r3 //= 96)
! (r1 = (r7 + 32))
! (r1 += ((r3 + 32) << 7))
! (write-multibyte-character r0 r1)))))))))
!
! (if (r0 < #xfe)
! ;; 4byte encoding
! ;; keep those bytes as eight-bit-{control|graphic}
! ;; Fixme: allow lookup in utf-8-subst-table.
! ((read r1 r2 r3)
! ;; r0 > #xf0, thus eight-bit-graphic
! (write-multibyte-character r6 r0)
! (if (r1 < #xa0)
! (if (r1 < #x80) ; invalid byte
! (write r1)
! (write-multibyte-character r5 r1))
! (write-multibyte-character r6 r1))
! (if (r2 < #xa0)
! (if (r2 < #x80) ; invalid byte
! (write r2)
! (write-multibyte-character r5 r2))
! (write-multibyte-character r6 r2))
! (if (r3 < #xa0)
! (if (r3 < #x80) ; invalid byte
! (write r3)
! (write-multibyte-character r5 r3))
! (write-multibyte-character r6 r3))
! (if (r0 >= #xf8) ; 5- or 6-byte encoding
! ((read r1)
! (if (r1 < #xa0)
! (if (r1 < #x80) ; invalid byte
! (write r1)
! (write-multibyte-character r5 r1))
! (write-multibyte-character r6 r1))
! (if (r0 >= #xfc) ; 6-byte
! ((read r1)
! (if (r1 < #xa0)
! (if (r1 < #x80) ; invalid byte
! (write r1)
! (write-multibyte-character r5 r1))
! (write-multibyte-character r6 r1)))))))
! ;; else invalid byte >= #xfe
! (write-multibyte-character r6 r0))))))
(repeat))))
"CCL program to decode UTF-8.
Basic decoding is done into the charsets ascii, latin-iso8859-1 and
! mule-unicode-*, but see also `utf-8-translation-table-for-decode' and
! `utf-8-subst-table'.
! Encodings of un-representable Unicode characters are decoded asis into
! eight-bit-control and eight-bit-graphic characters.")
(define-ccl-program ccl-encode-mule-utf-8
`(1
***************
*** 288,294 ****
(if (r0 == ,(charset-id 'mule-unicode-e000-ffff))
((r0 = ((((r1 & #x3f80) >> 7) - 32) * 96))
(r1 &= #x7f)
! (r1 += (r0 + 57312)) ; 57312 == -160 + #xe000
(r0 = (((r1 & #xf000) >> 12) | #xe0))
(r2 = ((r1 & #x3f) | #x80))
(r1 &= #x0fc0)
--- 470,476 ----
(if (r0 == ,(charset-id 'mule-unicode-e000-ffff))
((r0 = ((((r1 & #x3f80) >> 7) - 32) * 96))
(r1 &= #x7f)
! (r1 += (r0 + 57312)) ; 57312 == -32 + #xe000
(r0 = (((r1 & #xf000) >> 12) | #xe0))
(r2 = ((r1 & #x3f) | #x80))
(r1 &= #x0fc0)
***************
*** 329,339 ****
((write #xc2)
(write r1)))))))
! ;; Unsupported character.
! ;; Output U+FFFD, which is `ef bf bd' in UTF-8.
! ((write #xef)
! (write #xbf)
! (write #xbd)))))))))
(repeat)))
(if (r1 >= #xa0)
(write r1)
--- 511,529 ----
((write #xc2)
(write r1)))))))
! ((lookup-character utf-8-subst-rev-table r0 r1)
! (if r7 ; lookup succeeded
! ((r1 = (((r0 & #xf000) >> 12) | #xe0))
! (r2 = ((r0 & #x3f) | #x80))
! (r0 &= #x0fc0)
! (r0 >>= 6)
! (r0 |= #x80)
! (write r1 r0 r2))
! ;; Unsupported character.
! ;; Output U+FFFD, which is `ef bf bd' in UTF-8.
! ((write #xef)
! (write #xbf)
! (write #xbd)))))))))))
(repeat)))
(if (r1 >= #xa0)
(write r1)
***************
*** 341,409 ****
((write #xc2)
(write r1)))))
! "CCL program to encode into UTF-8.
! Only characters from the charsets ascii, eight-bit-control,
! eight-bit-graphic, latin-iso8859-1 and mule-unicode-* are recognized.
! Others are encoded as U+FFFD.")
;; Dummy definition so that the CCL can be checked correctly; the
;; actual data are loaded on demand.
(unless (boundp 'ucs-mule-8859-to-mule-unicode) ; don't zap it
(define-translation-table 'ucs-mule-8859-to-mule-unicode))
(defsubst utf-8-untranslated-to-ucs ()
! (let ((b1 (char-after))
! (b2 (char-after (1+ (point))))
! (b3 (char-after (+ 2 (point))))
! (b4 (char-after (+ 4 (point)))))
! (if (and b1 b2 b3)
! (cond ((< b1 ?\xf0)
! (setq b2 (lsh (logand b2 ?\x3f) 6))
! (setq b3 (logand b3 ?\x3f))
! (logior b3 (logior b2 (lsh (logand b1 ?\x0f) 12))))
! (b4
! (setq b2 (lsh (logand b2 ?\x3f) 12))
! (setq b3 (lsh (logand b3 ?\x3f) 6))
! (setq b4 (logand b4 ?\x3f))
! (logior b4 (logior b3 (logior b2 (lsh (logand b1 ?\x07)
! 18)))))))))
(defun utf-8-help-echo (window object position)
(format "Untranslated Unicode U+%04X"
(get-char-property position 'untranslated-utf-8 object)))
- (defvar utf-8-subst-table nil
- "If non-nil, a hash table mapping `untranslatable utf-8' to Emacs
characters.")
-
;; We compose the untranslatable sequences into a single character.
;; This is infelicitous for editing, because there's currently no
;; mechanism for treating compositions as atomic, but is OK for
! ;; display. We try to compose an appropriate character from a hash
! ;; table of CJK characters to display correctly. Otherwise we use
! ;; U+FFFD. What we really should have is hash table lookup from CCL
! ;; so that we could do this properly. This function GCs too much.
(defsubst utf-8-compose ()
"Put a suitable composition on an untranslatable sequence.
Return the sequence's length."
(let* ((u (utf-8-untranslated-to-ucs))
! (l (and u (if (>= u ?\x10000)
4
! 3)))
! (subst (and utf-8-subst-table (gethash u utf-8-subst-table))))
! (when u
(put-text-property (point) (min (point-max) (+ l (point)))
'untranslated-utf-8 u)
! (unless subst
! (put-text-property (point) (min (point-max) (+ l (point)))
! 'help-echo 'utf-8-help-echo)
! (setq subst ?$,3u=(B))
! (compose-region (point) (+ l (point)) subst)
l)))
(defcustom utf-8-compose-scripts nil
! "*Non-nil means compose various scipts on decoding utf-8 text."
:group 'mule
! :type 'boolean) ; omitted in Emacs 21.1
(defun utf-8-post-read-conversion (length)
"Compose untranslated utf-8 sequences into single characters.
--- 531,619 ----
((write #xc2)
(write r1)))))
! "CCL program to encode into UTF-8.")
;; Dummy definition so that the CCL can be checked correctly; the
;; actual data are loaded on demand.
(unless (boundp 'ucs-mule-8859-to-mule-unicode) ; don't zap it
(define-translation-table 'ucs-mule-8859-to-mule-unicode))
+ (define-ccl-program ccl-untranslated-to-ucs
+ `(0
+ (if (r0 < #xf0) ; 3-byte encoding, as above
+ ((r4 = 0)
+ (r3 = (r1 & #b11000000))
+ (r3 |= ((r2 >> 2) & #b00110000))
+ (if (r3 != #b10100000)
+ (r4 = 1)
+ ((r3 = ((r0 & #x0f) << 12))
+ (r3 += ((r1 & #x3f) << 6))
+ (r3 += (r2 & #x3f))
+ (if (r3 < #x0800)
+ (r4 = 1))))
+ (if (r4 != 0)
+ (r0 = 0)
+ (r0 = r3)))
+ (if (r0 < #xf8) ; 4-byte (Mule-UCS recipe)
+ ((r4 = (r1 >> 6))
+ (if (r4 != #b10)
+ (r0 = 0)
+ ((r4 = (r2 >> 6))
+ (if (r4 != #b10)
+ (r0 = 0)
+ ((r4 = (r3 >> 6))
+ (if (r4 != #b10)
+ (r0 = 0)
+ ((r1 = ((r1 & #x3F) << 12))
+ (r2 = ((r2 & #x3F) << 6))
+ (r3 &= #x3F)
+ (r0 = (((((r0 & #x07) << 18) | r1) | r2) | r3)))))))))
+ (r0 = 0))))
+ "Decode 3- or 4-byte sequences in r0, r1, r2 [,r3] to unicodes in r0.
+ r0 == 0 for invalid sequence.")
+
+ (defvar utf-8-ccl-regs (make-vector 8 0))
+
(defsubst utf-8-untranslated-to-ucs ()
! "Return the UCS code for an untranslated sequence of raw bytes t point.
! Only for 3- or 4-byte sequences."
! (aset utf-8-ccl-regs 0 (or (char-after) 0))
! (aset utf-8-ccl-regs 1 (or (char-after (1+ (point))) 0))
! (aset utf-8-ccl-regs 2 (or (char-after (+ 2 (point))) 0))
! (aset utf-8-ccl-regs 3 (or (char-after (+ 3 (point))) 0))
! (ccl-execute 'ccl-untranslated-to-ucs utf-8-ccl-regs)
! (aref utf-8-ccl-regs 0))
(defun utf-8-help-echo (window object position)
(format "Untranslated Unicode U+%04X"
(get-char-property position 'untranslated-utf-8 object)))
;; We compose the untranslatable sequences into a single character.
;; This is infelicitous for editing, because there's currently no
;; mechanism for treating compositions as atomic, but is OK for
! ;; display. They are composed to U+FFFD with help-echo which
! ;; indicates the unicodes they represent. This function GCs too much.
(defsubst utf-8-compose ()
"Put a suitable composition on an untranslatable sequence.
Return the sequence's length."
(let* ((u (utf-8-untranslated-to-ucs))
! (l (unless (zerop u)
! (if (>= u #x10000)
4
! 3))))
! (when l
(put-text-property (point) (min (point-max) (+ l (point)))
'untranslated-utf-8 u)
! (put-text-property (point) (min (point-max) (+ l (point)))
! 'help-echo 'utf-8-help-echo)
! (compose-region (point) (+ l (point)) ?$,3u=(B)
l)))
(defcustom utf-8-compose-scripts nil
! "*Non-nil means compose various scripts on decoding utf-8 text."
:group 'mule
! :version "21.4"
! :type 'boolean)
(defun utf-8-post-read-conversion (length)
"Compose untranslated utf-8 sequences into single characters.
***************
*** 412,449 ****
;; Can't do eval-when-compile to insert a multibyte constant
;; version of the string in the loop, since it's always loaded as
;; unibyte from a byte-compiled file.
! (let ((range (string-as-multibyte "^\341-\377")))
! (while (and (skip-chars-forward
! range)
(not (eobp)))
(forward-char (utf-8-compose)))))
! ;; Fixme: Takahashi-san implies it may not work this easily -- needs
! ;; checking with him.
(when (and utf-8-compose-scripts (> length 1))
;; These currently have definitions which cover the relevant
! ;; Unicodes. We could avoid loading thai-util &c by checking
;; whether the region contains any characters with the appropriate
;; categories. There aren't yet Unicode-based rules for Tibetan.
(save-excursion (setq length (diacritic-post-read-conversion length)))
(save-excursion (setq length (thai-post-read-conversion length)))
(save-excursion (setq length (lao-post-read-conversion length)))
! (save-excursion (setq length (devanagari-post-read-conversion length))))
length)
! (defun utf-8-pre-write-conversion (beg end)
! "Semi-dummy pre-write function effectively to autoload ucs-tables."
! ;; Ensure translation table is loaded.
! (require 'ucs-tables)
! ;; Don't do this again.
! (coding-system-put 'mule-utf-8 'pre-write-conversion nil)
! nil)
(make-coding-system
'mule-utf-8 4 ?u
"UTF-8 encoding for Emacs-supported Unicode characters.
! The supported Emacs character sets are the following, plus others
! which may be included in the translation table
! `ucs-mule-to-mule-unicode':
ascii
eight-bit-control
eight-bit-graphic
--- 622,660 ----
;; Can't do eval-when-compile to insert a multibyte constant
;; version of the string in the loop, since it's always loaded as
;; unibyte from a byte-compiled file.
! (let ((range (string-as-multibyte "^\xe1-\xf7")))
! (while (and (skip-chars-forward range)
(not (eobp)))
(forward-char (utf-8-compose)))))
! ;; Fixme: Takahashi-san implies it may not work this easily. I
! ;; asked why but didn't get a reply. -- fx
(when (and utf-8-compose-scripts (> length 1))
;; These currently have definitions which cover the relevant
! ;; unicodes. We could avoid loading thai-util &c by checking
;; whether the region contains any characters with the appropriate
;; categories. There aren't yet Unicode-based rules for Tibetan.
(save-excursion (setq length (diacritic-post-read-conversion length)))
(save-excursion (setq length (thai-post-read-conversion length)))
(save-excursion (setq length (lao-post-read-conversion length)))
! (save-excursion
! (setq length (in-is13194-devanagari-post-read-conversion length))))
length)
! ;; ucs-tables is preloaded
! ;; (defun utf-8-pre-write-conversion (beg end)
! ;; "Semi-dummy pre-write function effectively to autoload ucs-tables."
! ;; ;; Ensure translation table is loaded.
! ;; (require 'ucs-tables)
! ;; ;; Don't do this again.
! ;; (coding-system-put 'mule-utf-8 'pre-write-conversion nil)
! ;; nil)
(make-coding-system
'mule-utf-8 4 ?u
"UTF-8 encoding for Emacs-supported Unicode characters.
! The supported Emacs character sets are the following, plus any other
! characters included in the tables `ucs-mule-to-mule-unicode' and
! `utf-8-subst-rev-table':
ascii
eight-bit-control
eight-bit-graphic
***************
*** 462,471 ****
mule-unicode-e000-ffff
Unicode characters out of the ranges U+0000-U+33FF and U+E200-U+FFFF
! are decoded into sequences of eight-bit-control and eight-bit-graphic
! characters to preserve their byte sequences and composed to display as
! a single character. Emacs characters that can't be encoded to these
! ranges are encoded as U+FFFD."
'(ccl-decode-mule-utf-8 . ccl-encode-mule-utf-8)
'((safe-charsets
--- 673,684 ----
mule-unicode-e000-ffff
Unicode characters out of the ranges U+0000-U+33FF and U+E200-U+FFFF
! may be decoded into korean-ksc5601, chinese-gb2312, japanese-jisx0208
! \(see user option `utf-8-translate-cjk'); otherwise, sequences of
! eight-bit-control and eight-bit-graphic characters are used to
! preserve their byte sequences, and these are composed to display as a
! single character. Emacs characters that otherwise can't be encoded
! are encoded as U+FFFD."
'(ccl-decode-mule-utf-8 . ccl-encode-mule-utf-8)
'((safe-charsets
***************
*** 497,503 ****
(mime-charset . utf-8)
(coding-category . coding-category-utf-8)
(valid-codes (0 . 255))
! (pre-write-conversion . utf-8-pre-write-conversion)
(post-read-conversion . utf-8-post-read-conversion)))
(define-coding-system-alias 'utf-8 'mule-utf-8)
--- 710,716 ----
(mime-charset . utf-8)
(coding-category . coding-category-utf-8)
(valid-codes (0 . 255))
! ;; (pre-write-conversion . utf-8-pre-write-conversion)
(post-read-conversion . utf-8-post-read-conversion)))
(define-coding-system-alias 'utf-8 'mule-utf-8)