--- Begin Message ---
Subject: |
Guix doesn't boot with LUKS root partition |
Date: |
Tue, 25 May 2021 09:24:39 +0000 |
Hi,
I have Librem 14 (coreboot/seaBIOS) with Samsung 970 Evo Plus 2TB SSD. I
installed Guix manually, the disk has MBR partition table and these partitions:
/dev/nvme0n1p1 - 1GB, Linux (83), bootable
/dev/nvme0n1p2 - 1.8TB, Linux (83)
The nvme0n1p1 (/boot) is unencrypted with ext4:
mkfs.ext4 -L system-boot /dev/nvme0n1p1
The nvme0n1p2 (/) is encrypted using LUKS and on top is ext4:
cryptsetup luksFormat /dev/nvme0n1p2
cryptsetup open /dev/nvme0n1p2 luks
mkfs.ext4 -L system-root /dev/mapper/luks
mount LABEL=system-root /mnt
mkdir /mnt/etc /mnt/boot
mount LABEL=system-boot /mnt/boot
herd start cow-store /mnt
The relevant part on /mnt/etc/config.scm:
(bootloader
(bootloader-configuration
(bootloader grub-bootloader)
(target "/dev/nvme0n1")))
(mapped-devices
(list (mapped-device
(source (uuid "..."))
(target "luks")
(type luks-device-mapping))))
(file-systems
(cons* (file-system
(mount-point "/")
(device "/dev/mapper/luks")
(type "ext4")
(dependencies mapped-devices))
%base-file-systems)))
guix system init /mnt/etc/config.scm /mnt
Installation is without any errors. After rebooting grub asks for a password to
decrypt LUKS partition, then gives me the boot menu. When I hit enter, the
laptop gets stuck, I can't do ctrl+alt+f3,f4... only ctrl+alt+del works.
Attached are pictures from grub.
I also tried to use unencrypted root partition (basically the same as above,
but without LUKS) and it works.
Thanks,
J
grub1.jpeg
Description: JPEG image
grub2.jpeg
Description: JPEG image
--- End Message ---
--- Begin Message ---
Subject: |
Re: bug#48649: Guix doesn't boot with LUKS root partition |
Date: |
Tue, 24 Aug 2021 00:11:23 -0400 |
User-agent: |
Gnus/5.13 (Gnus v5.13) Emacs/27.2 (gnu/linux) |
Hello,
Tobias Geerinckx-Rice <me@tobias.gr> writes:
> Juraj Hlista 写道:
>> Not sure how the i915 module is related to LUKS though.
>
> Not, all all. You should see the same apparent ‘freeze’ when booting
> the system without LUKS with ‘--repl’ on the kernel command line.
>
> Linux prompts for the LUKS passphrase early, and (obviously :-) before
> the root file system is mounted. The kernel needs to display this
> prompt. The root file system contains all drivers. See the deadlock?
>
> Adding i915 to the initrd will ensure that it is loaded before the
> initrd tries to mount / and asks you for the passphrase, so
> everything will work fine. Building i915 into the kernel would have
> the same effect.
Seems this issue was about not having a required video driver in the
init RAM disk, rather than LUKS support.
Closing.
Glad you got it solved!
Maxim
--- End Message ---