Hi,
I've generated an image for the Lime2 with this (lime2.scm) file:
> ;; Based on Guix's beaglebone-black.tmpl
> (use-modules (gnu) (gnu bootloader u-boot))
> (use-package-modules bootloaders)
> (operating-system
> (host-name "lime2")
> (timezone "Europe/Paris")
> (locale "en_US.utf8")
> ;; We use a microSD
> (bootloader (bootloader-configuration
> (bootloader u-boot-a20-olinuxino-lime2-bootloader)
> (target "/dev/mmcblk0")))
> (kernel-arguments '("console=ttyS0,115200" "ignore_loglevel"))
> ;; This module is required to mount the SD card.
> (initrd-modules (cons "sunxi-mmc" %base-initrd-modules))
> (file-systems (cons (file-system
> (device (file-system-label "my-root"))
> (mount-point "/")
> (needed-for-boot? #t)
> (type "ext4"))
> %base-file-systems))
> (packages %base-packages)
> (services (append (list
> (agetty-service
> (agetty-configuration
> (extra-options '("-L"))
> (baud-rate "115200")
> (term "xterm-256color")
> (tty "ttyS0"))))
> %base-services)))
I then built it with:
> cp `guix system disk-image --target=arm-linux-gnueabihf lime2.scm` \
> guix.img
However when booting the image, u-boot doesn't find
/boot/extlinux/extlinux.conf.
However running the following command in u-boot makes the board boot:
> sysboot mmc 0:2 any $scriptaddr /boot/extlinux/extlinux.conf
When we look at the resulting image with fdisk -l we have:
> Device Boot Start End Sectors Size Id Type
> guix.img1 2048 83967 81920 40M ef EFI (FAT-12/16/32)
> guix.img2 83968 3301783 3217816 1.5G 83 Linux
The second partition (which has /boot/extlinux/extlinux.conf) doesn't
have the boot flag.
Adding the boot flag with the following command results in a booting
image:
> sfdisk guix.img -A 2
This is because the distro boot protocol (documented in
doc/README.distro in u-boot source code[1]) expects the partition that
holds the extlinux.conf config file to be "explicitly marked bootable".
else "U-Boot falls back to searching the first valid partition of a
disk for boot configuration files."
So we either need to remove the first partition or to mark the second
partition as bootable or both.
I've tried looking in the partitioning code to understand how flags are
set but I'm a complete newbie in scheme so I failed. Being able to set
the bootable flag could probably help in some situations where a first
partition has to be used for some reasons.
In addition, the first partition it only contains the
/EFI/BOOT/BOOTIA32.EFI file which is of the following type:
> PE32 executable (EFI application) Intel 80386 (stripped to external
> PDB), for MS Windows
So it could also be removed and/or replaced with ARM code.
References:
-----------
[1]https://gitlab.denx.de/u-boot/u-boot/-/raw/master/doc/README.distro
Denis.
pgpmuTp2Iyunc.pgp
Description: OpenPGP digital signature
--- End Message ---