All,
The GAP project has released version 0.9.5 of Terminal. This version contains fixes which have been applied to allow the application to properly compile and run on modern versions of GNUstep and also contains changes which allow it to work on additional operating systems such as Solaris and OpenBSD.
Terminal was originally written by Alex Malmberg for the Backbone project.
Please download the application, and other GAP applications at: http://gap.nongnu.org/====
Terminal.app - copyright (c) 2002 Alexander Malmberg <alexander@malmberg.org>
OpenPty and ForkPty replacements written by Riccardo Mottola, 2005-2008
a terminal emulator
for GNUstep
This file is a part of Terminal.app. Terminal.app is free software; you
can redistribute it and/or modify it under the terms of the GNU General
Public License as published by the Free Software Foundation; version 2
of the License. See COPYING or main.m for more information.
Installing
----------
You'll need gnustep-base and gnustep-gui (or possibly some other
openstep-like system).
The pty code is known to work on GNU/Linux and FreeBSD and NetBSD.
Pty code replacement is provided and used by default on Solaris, where
it is known to work. On other operating systems you might want to
define USE_FORKPTY_REPLACEMENT in TerminalView.m
Reports
and/or patches for other systems are welcome.
To build, run 'make'.
To install, run 'make install'.
(All the usual gnustep-make options apply.)
Running
-------
Run it just like you'd run any other GNUstep
application, eg.:
openapp Terminal.app
An empty window with a shell will be opened when the program starts, unless
you gave it a command on the command line, in which case that command will
be run in the opened window.
Fonts
-----
You can change the fonts used for normal and bold text in the preferences
panel. Terminal.app will get the metrics for the character cells from the
normal font, so this font really should be a fixed pitch font or things
will look messed up. The bold font should closely match the normal font.
(Terminal.app assumes that all characters, bold and normal, stay inside
the normal font's bounding box. If they don't, there will be visual
glitches. However, it is more common that a non-fixed pitch font's bounding
box is very large (since it needs to enclose _all_ characters in the font),
so that the terminal window will be very
wide.)
Keys
----
By default, the command key is used to access key equivalents for menu
entries, and thus can't be used as a meta key in the terminal. If you
have command mapped to the key you want to use as meta, you can enable
'Treat the command key as meta' in the preferences panel. However, this
will disable all key equivalents in Terminal.app. The 'proper' solution
to this problem is to remap the command key (and possibly alternate key).
The alternate key will always be treated as meta.
Often, the escape key can be used to emulate a meta key. This means that
in some programs, you might have to press escape twice to get a 'real'
escape, or there will be a delay before it is handled. The 'Send a double
escape...' option causes Terminal.app to send a double escape when you hit
the escape key (ie. "\e\e"), which should work better (but you can no
longer use the escape key as
meta).
Terminal services
-----------------
Terminal.app can provide services for other applications by piping the
selection through arbitrary commands. Services are configured in one of
the preferences panel's tabs. The first time you open this tab, a default
set of services will be loaded. To save these where make_services will
actually find them, press 'Apply and save'. This will also run
make_services to update the services list, but it may take up to 30
seconds for running applications to notice the change.
The 'Add' and 'Remove' buttons add and remove services. Using the 'Export'
button it is possible to save a set of services to a file. These files
can be imported using the 'Import' button, so it is possible for users to
share terminal services definitions. The extension of the file should be
'.svcs'. The default set of services is such a file located in the
application wrapper's
resource directory. If you import a service with
the same name as an existing service, and they aren't identical, the new
one will be renamed to avoid a conflict.
Name
This is the name of the service as it appears in the services menu. By
default, terminal services will be placed in a 'Terminal' submenu
of the Services menu, but you can override this by giving the name a
leading '/'. In this case, you can also use a second '/' to create your
own submenus. (gnustep-gui doesn't support submenus of submenus, though.)
Names must be unique.
Key
The key equivalent for this command, if any. Note that if an application
uses this key for some other menu entry, the key will activate that menu
entry, not the service.
Command line
The command line. It is passed to /bin/sh, so any shell commands will
work, and arguments may have to
be quoted. A '%p' in the command line
will cause a prompt to be brought up when the service is run. If input
is to be placed on the command line, you can mark the place to put it
at with '%s' (otherwise it will be appended to the command line). You
can use '%%' to get a real '%'.
Run in background/new window/idle window
If a service is set to run in the background, the command will have to
complete before the service will return, and the service can return
output. Otherwise, the command's output will appear in a window. 'new
window' causes a completely new window to be opened (and it will close
automatically when the command is completed if that option is set).
'idle window' causes Terminal.app to try to reuse an existing idle
window. If there is no such window it will open a new window (and that
window won't close
automatically).
Ignore/return output (only applies to background services)
If set to ignore, the output of the command will be discarded. Otherwise,
it will be parsed to a string or a bunch of filenames, depending on the
acceptable types. The output is assumed to be utf8 encoded.
No input/Input in stdin/Input on command line
If set to 'No input', the service won't accept any input. Otherwise it
is necessary to select something to run it, and the selection will be
either piped to the command ('in stdin') or placed on the service's
command line (either at the '%s' or at the end, see above). Input will
be sent to the command utf8 encoded.
Accept types
Plain text will be sent verbatim to the command. A list of filenames
(possibly just one) will be sent separated by ' ':s (if on the command
line), or newlines (if in
stdin).
Terminal emulation
------------------
The terminal emulation code is based on Linux's console code, and nearly
all parts of it are handled. Thus, the TERM environment variable is set
to 'linux'. Additionally, 'vt100', 'vt220', 'xterm', and others similar
to these should mostly work. To distinguish Terminal.app from a 'real'
linux console, the environment variable TERM_PROGRAM is set to
'GNUstep_Terminal'.
The xterm extensions for setting the window's title are also supported.
You set the title using:
'\033]'+0, 1, or 2+';'+the title+'\007'
1 sets the miniwindow title, 2 sets the window title, and 0 sets both.
Example (from Jeff Teunissen):
export PROMPT_COMMAND='echo -ne "\033]2;Terminal - ${HOSTNAME}:${PWD}\007"'
(The terminal emulation code is fairly modular. If you want to write a
terminal emulation class for some other terminal, contact me and
I'll
do the remaining cleanups necessary to load terminal emulation classes
from bundles.)
====
Thanks,
Gregory Casamento -- Principal Consultant - OLC, Inc
# GNUstep Chief Maintainer