|
From: | Jeff Long |
Subject: | Re: Rational resampler does not change behaviour when changing the decimaton rate |
Date: | Sat, 27 Nov 2021 20:58:37 -0500 |
I'm using the following diagram to test it, where
the first freq sink (x1) has bandwidth fixed to samp_rate/1 and its rational resampler have decimation fixed to 1
the second freq sink (x2) has bandwidth fixed to samp_rate/2 and its rational resampler have decimation fixed to 2
the third freq sink (x5) has bandwidth fixed to samp_rate/5 and its rational resampler have decimation fixed to 5
the fourth freq sink (variable) has bandwidth fixed to samp_rate/decimation and its rational resampler have decimation fixed to decimation
I run the diagram, decimation default value is 1 and all seems to work
Then I change decimation in the GUI Range and the variable block don't work
Then I stop the diagram, change the default value of the GUI range to 2
I run it again .... it works
Then I change the value of decimation in the GUI range .... and it does not work
The x axis change but the "image" don't ... what am I doing bad?
rrparams.png
Description: PNG image
[Prev in Thread] | Current Thread | [Next in Thread] |