[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: OutofTree Block C++ problem

From: Malte Lenhart
Subject: Re: OutofTree Block C++ problem
Date: Mon, 15 Nov 2021 23:47:02 +0100


happy to hear that. The itemsize mismatch is usually indicating that two connected blocks operate on different data types.

You want to return doubles, which typically take up 64bits = 8bytes (which gnu radio indicates without giving the unit as reference unfortunately). So the question is to what kind of block your OOT block is connected to, and if that one also is set to operate on doubles (although many blocks don't seem to be able to operate on doubles if I see that right.. youbles should be float64 in gnu radio, but e.g. the null sink doesn't have that one..). If the other block expects 1 (8bits) that probably is set to char or byte.

You could either ask yourself if you need doubles or if floats suffice (in which case you can omit the static_cast). Alternatively you have to modify blocks down the flow to operate on doubles.

I just checked what the chunks to symbols block does, and that raised a few more questions...
- the chunks to symbols does a 1-to-N conversion of samples. why not just let the random source produce as many samples as required and skip that block?
- your block is named random byte source, but returns doubles. is that intended?

Concluding: yes, your initial assumption on the error is correct, I hope that the open questions can help you to decide what fix to choose when adjusting your block :-)



On 15.11.21 21:18, Mario Moran wrote:
This fixed my problem. Thank you so much. I am wondering if you know anything about runtime error: itemsize mismatch? Would this mean that I am returned a value that the chunks to symbols block can't handle it? Because it says that my random block is 8 while the chunks to symbol is 1. 

On Mon, Nov 15, 2021 at 4:23 AM Malte Lenhart <malte.lenhart@mailbox.org> wrote:
Hi Mario,

have a look at the header file here: https://github.com/gnuradio/gnuradio/blob/eb91fb04b3d0ca8124b9bea375e3bf72963fa172/gnuradio-runtime/include/gnuradio/random.h

61|    double X = gr::random(0,0,2)
    |                           ^~~~~~~~~~~
    |                           gr::random

you are calling the constructor of gr::random here, which does not return anything.

Instead you need to assign it something and then query it for random numbers


gr::random foo = gr::random(0,0,2);
int i = foo.ran_int();
// .. you can then do it again of course
int j = foo.ran_int();

you seem to be wanting a double, where you have to check which distribution you want (see the header file).

One example could be

double d = static_cast<double>(foo.gasdev());

which will, if I looked right, give you a float in the range of -1 and 1. To get it in range 0 to 2, you can just add 1.0 to it.

Best regards,


[my mail program/me took the wrong mail address when replying to the digest, therefore answer delayed a bit]

Attachment: OpenPGP_signature
Description: OpenPGP digital signature

reply via email to

[Prev in Thread] Current Thread [Next in Thread]