[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Installing Images and firmware USRPN200/N210
From: |
Marcus D. Leech |
Subject: |
Re: Installing Images and firmware USRPN200/N210 |
Date: |
Fri, 22 Oct 2021 13:33:13 -0400 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:78.0) Gecko/20100101 Thunderbird/78.13.0 |
On 2021-10-22 11:33 a.m., isaac mario tupac davila wrote:
Using Device: Single USRP:
Device: USRP2 / N-Series Device
Mboard 0: N???
RX Channel: 0
RX DSP: 0
RX Dboard: A
RX Subdev: BasicRX (AB)
TX Channel: 0
TX DSP: 0
TX Dboard: A
TX Subdev: Unknown (0xffff) - 0
If you look here:
Using Device: Single USRP:
Device: USRP2 / N-Series Device
Mboard 0: N???
RX Channel: 0
RX DSP: 0
RX Dboard: A
RX Subdev: BasicRX (AB)
TX Channel: 0
TX DSP: 0
TX Dboard: A
TX Subdev: Unknown (0xffff) - 0
You can see that it's unable to clearly identify what type of device
this is. This implies that the motherboard EEPROM contains invalid data.
What happens if you:
/usr/lib/uhd/utils/usrp_burn_mb_eeprom --args "addr=192.168.10.2" --read-all
Or substitute whatever IP address your device has.
- Installing Images and firmware USRPN200/N210, isaac mario tupac davila, 2021/10/15
- Re: Installing Images and firmware USRPN200/N210, Marcus D. Leech, 2021/10/15
- Re: Installing Images and firmware USRPN200/N210, isaac mario tupac davila, 2021/10/20
- Re: Installing Images and firmware USRPN200/N210, Marcus D. Leech, 2021/10/20
- Re: Installing Images and firmware USRPN200/N210, isaac mario tupac davila, 2021/10/22
- Re: Installing Images and firmware USRPN200/N210,
Marcus D. Leech <=
- Re: Installing Images and firmware USRPN200/N210, isaac mario tupac davila, 2021/10/22
- Re: Installing Images and firmware USRPN200/N210, Marcus D. Leech, 2021/10/22
- Re: Installing Images and firmware USRPN200/N210, isaac mario tupac davila, 2021/10/22