Re: SoapySDR Question

[Glen Langston]

Hi Jeff,

Thanks for your quick reply.

I was having trouble figuring out what to put in the Soapy Source block.   
Do you have a flow graph example?

Thanks

Glen

In the mean time I’ll try pybombs


> On Sep 30, 2021, at 9:11 PM, Jeff Long <willcode4@gmail.com> wrote:
> 
> I installed gr-soapy for 3.8 (using PyBOMBS), plugged in a RSP1A, and it 
> worked. This is the LibreSpace code, as we don't have in-tree Soapy support 
> in 3.8.
> 
> I'd already installed the soapy libs (v0.8.1-g1cf5a539) and driver modules, 
> also via PyBOMBS. Make sure it's not a soapy or usb problem by running
> 
>   SoapySDRUtil --probe
> 
> My test was just a Soapy Source connected to a QT GUI Sink. Sample rate is 
> 1M, and so is the bandwidth in the Soapy Source on the RF tab. Don't know if 
> that matters. Everything else is defaults.
> 
> On Thu, Sep 30, 2021 at 8:46 PM Glen Langston <glen.i.langston@gmail.com> 
> wrote:
> Thanks for all everyone's efforts.   
> 
> We hope to give them a try.
> 
> I’ve got a Soapy SDR question.   Does anyone have a SDRPlay RSP1A running
> with Gnuradio 3.8.  I’ve not been able to find a running example.
> 
> Please send a link, if you’ve got a good example.
> 
> Thanks!
> 
> Glen
> 
> For our successes in Radio Astronomy work see the memos at
> https://github.com/WVURAIL/lightwork
> 
> 
> > On Sep 30, 2021, at 7:39 PM, Jeff Long <willcode4@gmail.com> wrote:
> > 
> > GNU Radio has released v3.8.4.0 and v3.9.3.0, hitting the September target 
> > date with hours to spare. For details, see the Github release pages:
> > 
> > https://github.com/gnuradio/gnuradio/releases/tag/v3.8.4.0
> > https://github.com/gnuradio/gnuradio/releases/tag/v3.9.3.0
> > 
> > Next releases are expected in December.
>