A Modal Identification Algorithm Combining Blind Source Separation and State Space Realization

Show more

References

[1] L. Tong, V. C. Soon, Y. Huang and R. Liu, “AMUSE: A New Blind Identification Algorithm,” Proceedings of IEEE International Symposium on Circuits and Systems, New Orleans, 1-3 May 1990, pp. 1784-1787.
doi:10.1109/ISCAS.1990.111981

[2] A. Belouchrani, K. Abed-Meraim, J.-F. Cardoso and E. Moulines, “A Blind Source Separation Technique Using Second-Order Statistics,” IEEE Transactions on Signal Processing, Vol. 45, No. 2, 1997, pp. 434-444.
doi:10.1109/78.554307

[3] S. Chauhan, R. J. Allemang, R. Martell and D. L. Brown, “Application of Independent Component Analysis and Blind Source Separation Techniques to Operational Modal Analysis,” Proceedings of the 25th International Modal Analysis Conference, Orlando, 19-22 February 2007.

[4] F. Poncelet, G. Kerschen, J.-C. Golinval and D. Verhelst, “Output-Only Modal Analysis Using Blind Source Separation Techniques,” Mechanical Systems and Signal Processing, Vol. 21, No. 6, 2007, pp. 2335-2358.
doi:10.1016/j.ymssp.2006.12.005

[5] W. Zhou and D. Chelidze, “Blind Source Separation Based Vibration Mode Identification,” Proceedings of the 25th International Modal Analysis Conference, Orlando, 19-22 February 2007, pp. 3072-3087.

[6] S. I. McNeill and D. C. Zimmerman, “A Framework for Blind Modal Identification Using Joint Approximate Diagonalization,” Mechanical Systems and Signal Processing, Vol. 22, No. 7, 2007, pp. 1526-1548.
doi:10.1016/j.ymssp.2008.01.010

[7] S. I. McNeill, “Modal Identification Using Blind Source Separation Techniques,” Ph.D. Dissertation, University of Houston, Houston, 2007.

[8] S. I. McNeill and D. C. Zimmerman, “Blind Modal Identification Applied to Output-Only Building Vibration,” Proceedings of the 28th International Modal Analysis Conference, Jacksonville, 2010.

[9] S. I. McNeill, “An Analytic Formulation for Blind Modal Identification,” Journal of Vibration and Control, Vol. 18, No. 14, 2012, pp. 2111-2121.
doi:10.1177/1077546311429146

[10] A. Belouchrani, K. Abed-Meraim, J.-F. Cardoso and E. Moulines, “A Blind Source Separation Technique Using Second-Order Statistics,” IEEE Transactions on Signal Processing, Vol. 45, No. 2, pp. 434-444.
doi:10.1109/78.554307

[11] P. Tichavsky and A. Yeredor, “Fast Approximate Joint Diagonalization Incorporating Weight Matrices,” IEEE Transactions of Signal Processing, Vol. 57. No. 3, 2009, pp. 878-891. doi:10.1109/TSP. 2008.2009271

[12] P. Tichavsky, A. Yeredor and J. Nielsen, “A Fast Approximate Joint Diagonalization Algorithm Using a Criterion with a Block Diagonal Weight Matrix,” Proceedings of the 2008 International Conference on Acoustics, Speech and Signal Processing, Las Vegas, 31 March-4 April 2008, pp. 3321-3324.

[13] P. Tichavsky, “UWEDGE_C—Complex Version (Version for Complex-Valued Matrices and Complex-Valued Mixing) of the Algorithm UWEDGE,” 2010.
http://si.utia.cas.cz/downloadPT.htm

[14] F. Abazarsa, S. Ghahari, F. Nateghi and E. Taciroglu, “Response-Only Modal Identification of Structures Using Limited Sensors,” Structural Control and Health Monitoring, Vol. 20, No. 6, 2013, pp. 987-1006.
doi:10.1002/stc.1513

[15] F. Abazarsa, S. Ghahari, F. Nateghi and E. Taciroglu, “Blind Modal Identification of Non-Classically Damped Systems from Free or ambient Vibration Records,” Earthquake Spectra, in Press.

[16] S. I. McNeill, “Extending Blind Modal Identification to the Underdetermined Case for Ambient Vibration,” Proceedings of the ASME 2012 International Mechanical Engineering Congress & Exposition, Houston, 9-15 November 2012.

[17] L. De Lathauwer and J. Castaing, “Blind Identification of Underdetermined Mixtures by Simultaneous Matrix Diagonalization,” IEEE Transactions on Signal Processing, Vol. 56, No. 3, 2008, pp. 1096-1105.
doi:10.1109/TSP.2007.908929

[18] J. Antoni and S. Chauhan, “Second Order Blind Source Separation Techniques (SO-BSS) and Their Relation to Stochastic Subspace Identification (SSI) Algorithm,” Proceedings of the 28th International Modal Analysis Conference (IMAC), 2010.

[19] J. Antoni and S. Chauhan, “A Study and Extension of Second-Order Blind Source Separation to Operational Modal Analysis,” Journal of Sound and Vibration, Vol. 332, No. 4, 2013, pp. 1079-1106.
doi:10.1016/j.jsv.2012.09.016

[20] A.-J. van der Veen, “Joint Diagonalization via Subspace Fitting Techniques,” International Conference on Acoustics, Speech, and Signal Processing—ICASSP, Salt Lake City, 7-11 May 2001, pp. 2773-2776.

[21] R. J. Allemang and D. L. Brown, “A Correlation Coefficient for Modal Vector Analysis,” Proceedings of the 1st International Modal Analysis Conference, Orlando, 8-10 November 1982, pp. 110-116.

[22] C. Ventura, R. Brinker, E. Dascotte and P. Anderson “FEM Updating of the Heritage Court Building Structure,” Proceedings of the 19th International Modal Analysis Conference, Kissimmee, 5-8 February, 2001, pp. 324-330.

[23] B. Peeters, “System Identification and Damage Detection in Civil Engineering,” Ph.D. Dissertation, Katholike Universite Leuven, Belgium, 2000.