Hello,
I cannot get the combined Constellation Modulator/Decoder as shown below to work. The figure below is an example from the online Guided Tutorial PSK Demodulation.... I leave out the Equalizer, Costas Loop blocks, the channel was set to pass the signal unimpaired and the Poly Clock Sync was set for Output sps=1. The constellation plot of the output of the Poly Clock Sync is perfect. Now, in the flowgraph below, the signal entering the Constellation Modulator and that leaving the Constellation Decoder are routed into Time Sinks for display. I route these signals into File Sinks so I can print them and compare 1's and 0's. The results show they are not the same. I passed
Constellation Rect.Object parameters to both the
Constellation Modulator and Decoder, which seems logical to me, but I could be wrong???
Will appreciate any help you can provide because what enters the modulator should be the same as what is leaving the demodulator.
Regards,
George
