[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: GRC max sample rate

From: Koyel Das (Vehere)
Subject: Re: GRC max sample rate
Date: Sat, 25 Jul 2020 12:45:13 +0000

Hi Paul,

Ok thanks for the information. 


From: Discuss-gnuradio <discuss-gnuradio-bounces+koyel.das=vehere.com@gnu.org> on behalf of Paul Boven <p.boven@xs4all.nl>
Sent: Saturday, July 25, 2020 2:12:25 PM
To: discuss-gnuradio@gnu.org <discuss-gnuradio@gnu.org>
Subject: Re: GRC max sample rate
Hi Koyel,

I was attempting to explain why the output of the USRP block (Complex
Int16) doesn't directly connect to other blocks. Although no other block
in GNU radio seems to use the type 'Complex Int16', it is actually just
a vector of size 2, containing the I and Q samples as 16 bits int.

It is possible to connect the USRP source block directly to the File
Sink block: you just need to set Vec Length to 2 in the File Sink block,
and set the data type to 'short'.

Other blocks in GNU Radio can use either the 'Short' or the 'IShort'
data type, where the latter stands for 'Interleaved Short'. Using the
'Vector to Stream' block as described in my previous mail, you can
convert the vector shorts from the USRP block into interleaved shorts
which can then be converted into e.g. floats.

Regards, Paul Boven.

On 7/25/20 10:22 AM, Koyel Das (Vehere) wrote:
> Hi Paul,
> Thanks for your help. Can you please give an example? Like if usrp
> source outputs 16 bit complex as I Q I Q I Q I Q for 4 IQ samples where
> I and Q are 16 bit complex then what will be the change in the format
> after vector to stream conversion? I understood that usrp source block
> already gives binary file where I and Q are written alternately as above
> or interleaved. So I am unable to understand when you say vector to
> stream will interleave I and Q samples.
> Regards,
> Koyel
> Get Outlook for iOS <https://aka.ms/o0ukef>
> ------------------------------------------------------------------------
> *From:* Discuss-gnuradio
> <discuss-gnuradio-bounces+koyel.das=vehere.com@gnu.org> on behalf of
> Paul Boven <p.boven@xs4all.nl>
> *Sent:* Saturday, July 25, 2020 1:31:20 PM
> *To:* discuss-gnuradio@gnu.org <discuss-gnuradio@gnu.org>
> *Subject:* Re: GRC max sample rate
> Hi Koyel,
> On 7/25/20 9:19 AM, Koyel Das (Vehere) wrote:
>> Will there be packet drops if USRP source is set at 32 bit complex float
>> in grc when receiving at 100 MSPS each from two channels? That makes
>> 2*100e6*64 (32 bit I and 32 bit Q) = 12800e6 or 12.8 gbps. I am unable
>> to set usrp source block to 16 bit complex as then the usrp source block
>> is not compatible with file sink which doesn’t have option for 16 bit
>> complex.
> The USRP block is (as far as I could find) the only block in all of GNU
> Radio that uses the 'Complex Int16' type. Which is a bit confusing, but
> it is just a vector with a length of 2, alternating the I and Q channels
> as 16 bit shorts.
> You can simply convert it to interleaved int16 by using a 'Vector to
> Stream' block, with these settings:
> io_type: short
> num_items: 2
> vec_length: 1
> These 16 bit integers can then be written to disk (if it can keep up),
> memory, transferred over the network, or turned into floats for further
> processing.
> We use this to efficiently stream raw samples over the internet using a
> ZMQ Pub Sink.
> Regards, Paul Boven.

reply via email to

[Prev in Thread] Current Thread [Next in Thread]