discuss-gnuradio
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [USRP-users] How to set channel B reception with rfnoc USRP E310?


From: Ivan Zahartchuk
Subject: Re: [USRP-users] How to set channel B reception with rfnoc USRP E310?
Date: Tue, 5 May 2020 01:16:16 +0300

Unfortunately, this method does not work. Maybe there are some other ideas?

пн, 4 трав. 2020, 23:38 користувач Rob Kossler <address@hidden> пише:
Does the 2nd argument to set_rx_antenna() indicate which radio port?  If so, try setting it to 1.
Rob

On Mon, May 4, 2020 at 2:02 PM Ivan Zahartchuk via USRP-users <address@hidden> wrote:
Hello, I'm trying to switch between all four USRP E310 inputs. For this, I use the command self.uhd_rfnoc_streamer_radio_0.set_rx_antenna ("TX / RX", 0) but I can only switch in channel A. RFNoC Radio does not have the set_rx_subdev_spec command. Tell me how can I switch across all 4 channels?
_______________________________________________
USRP-users mailing list
address@hidden
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com

reply via email to

[Prev in Thread] Current Thread [Next in Thread]