[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: gnuradio 3.8 errors with gr_modtool
From: |
Maitland Bottoms |
Subject: |
Re: gnuradio 3.8 errors with gr_modtool |
Date: |
Fri, 21 Feb 2020 19:19:37 -0500 |
On Fri, 21 Feb 2020 10:58:18 -0800
Laura Arjona <address@hidden> wrote:
> UnicodeDecodeError: 'utf-8' codec can't decode byte 0xe8 in position
> 5: invalid continuation byte
The problem comes from Python byte-compiled files used as templates.
Perhaps the template processor is choking on a .pyc file?
The solution is to remove all .pyc files found under
/usr/share/gnuradio/modtool/gr-newmod
(or whatever the correct path is for the modtool template directory
in your installation.)
If you have files like
.../gnuradio/modtool/gr-newmod/python/build_utils_codes.pyc
.../gnuradio/modtool/gr-newmod/python/build_utils.pyc
.../gnuradio/modtool/gr-newmod/python/__init__.pyc
then this is likely the trouble.
In Debian, this bug is #946120
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=946120
It has been fixed in Debian's gnuradio 3.8 packages, so I am curious
about how you might have ended up with this trouble.
Hope that helps,
-Maitland
- gnuradio 3.8 errors with gr_modtool, Laura Arjona, 2020/02/21
- Re: gnuradio 3.8 errors with gr_modtool, Marcus Müller, 2020/02/21
- Re: gnuradio 3.8 errors with gr_modtool,
Maitland Bottoms <=
- Re: gnuradio 3.8 errors with gr_modtool, Laura Arjona, 2020/02/25
- Re: gnuradio 3.8 errors with gr_modtool, Maitland Bottoms, 2020/02/25
- Re: gnuradio 3.8 errors with gr_modtool, Laura Arjona, 2020/02/25
- Re: gnuradio 3.8 errors with gr_modtool, Laura Arjona, 2020/02/25
- Message not available
- Re: gnuradio 3.8 errors with gr_modtool, Morman, Joshua, 2020/02/26
- Re: gnuradio 3.8 errors with gr_modtool, Laura Arjona, 2020/02/26