[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] query regarding store transmitted signal

From: Maitry Raval
Subject: Re: [Discuss-gnuradio] query regarding store transmitted signal
Date: Fri, 17 May 2019 17:06:41 +0530 (IST)


Thanks for your reply.

I.e It is possible to store the transmitted modulated signal (for ex AM 
modulated signal) through USRP as per below, 
USRP source - file sink. but in which format, this data can be stored? (.txt, 
.pdf)_ I have seen.DAT file in one of the example,but when I tried , it does 
not give proper output.

Actually, my requirement is to receive the modulated signal through USRP 
source, store it in a file. and later, I can be able to do demodulation offline 
from that particular stored data. it will be grateful, if you provide guidance.

With Best Regards,
Maitry Raval,

----- Original Message -----
From: "Marcus Müller, CEL" <address@hidden>
To: "discuss-gnuradio" <address@hidden>, "maitry raval" <address@hidden>
Sent: Friday, 17 May, 2019 10:50:00
Subject: Re: [Discuss-gnuradio] query regarding store transmitted signal

Hi Maitry,

sorry, we have no idea what lab you're referring to! However, yes, that
sounds exactly what File Sinks are meant to do.

Best regards,

On Fri, 2019-05-17 at 12:01 +0530, Maitry Raval wrote:
> Hello,
> I want to store the modulated transmitted signal through USRP such as given 
> in lab -3 receiving AM signal and store it as .DAT file. Is it possible to 
> store transmitted signal as .DAT file through USRP source and file sink? and 
> use that stored data from file source to do demodulation.
> thanks for your support in advance.
> With Best Regards,
> Maitry Raval,
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio

reply via email to

[Prev in Thread] Current Thread [Next in Thread]